사출성형 CAE와 기계학습을 활용한 모바일 렌즈의 성형조건 최적화
Optimization of Molding Conditions for Mobile Lens using Injection Molding CAE and Machine Learning
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this paper, to improve the optical quality of aspherical plastic lenses for mobile use, the optimal molding conditions that can minimize the phase difference are derived using injection molding simulation, design of experiments, and machine learning. First, factors affecting the phase difference were derived using the design of the experiment method, and a data set was created using the derived factors, followed by the machine learning process. After predicting the model trained using the generated training data as test data and verifying it with the performance evaluation index, the model with the best predictive performance was the random forest model. Therefore, to derive the optimal molding conditions, random forests were used to predict 10,000 random pieces of data. As a result of applying the derived optimal molding conditions to the injection molding simulation, the phase difference of the lens could be reduced by 8.2%.
Abstract
In this paper, to improve the optical quality of aspherical plastic lenses for mobile use, the optimal molding conditions that can minimize the phase difference are derived using injection molding simulation, design of experiments, and machine learning. First, factors affecting the phase difference were derived using the design of the experiment method, and a data set was created using the derived factors, followed by the machine learning process. After predicting the model trained using the generated training data as test data and verifying it with the performance evaluation index, the model with the best predictive performance was the random forest model. Therefore, to derive the optimal molding conditions, random forests were used to predict 10,000 random pieces of data. As a result of applying the derived optimal molding conditions to the injection molding simulation, the phase difference of the lens could be reduced by 8.2%.
참고문헌 (11)
- Korea Optical Instruments Association, "Evolution of Smartphone Cameras Continues-Description of main parts of mobile phone cameras", Optical World(Korea Optical Instruments Association), 159, pp.47~50 (2015)
- Korea Optical Instruments Association, "Understanding Birefringence and Measurement of Birefringence of Lenses", Optical World(Korea Optical Instruments Association), 97, pp.58~61 (2005)
- 공기환, "광학렌즈의 사출압축성형에서 오버플로우를 이용한웰드라인과 복굴절 저감", 한국기계가공학회지, 17(1), pp.95~100 (2018), 한국기계가공학회[DOI]
- 조성우, "금형 게이트 크기 변화에 따른 멀티빔 센서용 렌즈 사출성형성 향상에 관한 연구", 소성∙가공, 20(5), pp.333~338 (2011), 한국소성∙가공학회
- 곽태수, "플라스틱 광학렌즈 사출성형에 있어서 수축 변형량 예측을 위한 사출성형 조건 탐색에 관한 연구", 한국정밀공학회지, 21(2), pp.27~34 (2004), 한국정밀공학회
- S. Jiang, "Birefringence Analysis of Transparent Plastic Plate Based on Moldflow", Journal of Convergence Information Technology, 8(1) (2013)
- 이용선, "상관분석 및 의사결정나무를 통한 사출 성형품 변형의 영향 인자 분석", 한국기계기술학회지, 24(1), pp.115~121 (2022), 한국기계기술학회[DOI]
- A. Bakharev, "Prediction of birefringence in plastic moldings, International Society for Optics and Photonics", Optifab 2007: Technical Digest, 10316, pp.1031615~ (2007)
- 박용철, "굴절", 회절 하이브리드 렌즈 적용 슬림 모바일 렌즈 설계, 2020, pp.31(6), 281~289[DOI]
- 홍동희, "머신러닝 기반 신체 계측정보를 이용한 CT 피폭선량 예측모델 비교", 방사선기술과학, 43(6), pp.503~509 (2020), 대한방사선과학회
- 김영석, "사출공정에서 휨 변형을 최소로 하는 호퍼 설계 연구", 한국산학기술학회논문지, 16(1), pp.35~42 (2015), 한국산학기술학회[DOI]