머신러닝 알고리즘을 이용한 소형 플라스틱 렌즈 사출물의 변형 예측
Prediction of Deformation of Small Plastic Lens using Machine Learning Algorithm
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
For a plastic diffusion lens to uniformly diffuse light, it is important to minimize deformation that may occur during injection molding and to minimize deformation. It is essential to control the injection molding condition precisely. In addition, as the number of meshes increases, there is a limitation in that the time required for analysis increases. Therefore, We applied machine learning algorithms for faster and more precise control of molding conditions. This study attempts to predict the deformation of a plastic diffusion lens using the Decision Tree regression algorithm. As the variables of injection molding, melt temperature, packing pressure, packing time, and ram speed were set as variables, and the dependent variable was set as the deformation value. A total of 256 injection molding analyses were conducted. We evaluated the prediction model's performance after learning the Decision Tree regression model based on the result data of 256 injection molding analyses. In addition, We confirmed the prediction model's reliability by comparing the injection molding analysis results.
Abstract
For a plastic diffusion lens to uniformly diffuse light, it is important to minimize deformation that may occur during injection molding and to minimize deformation. It is essential to control the injection molding condition precisely. In addition, as the number of meshes increases, there is a limitation in that the time required for analysis increases. Therefore, We applied machine learning algorithms for faster and more precise control of molding conditions. This study attempts to predict the deformation of a plastic diffusion lens using the Decision Tree regression algorithm. As the variables of injection molding, melt temperature, packing pressure, packing time, and ram speed were set as variables, and the dependent variable was set as the deformation value. A total of 256 injection molding analyses were conducted. We evaluated the prediction model's performance after learning the Decision Tree regression model based on the result data of 256 injection molding analyses. In addition, We confirmed the prediction model's reliability by comparing the injection molding analysis results.
참고문헌 (11)
- 황순환, "사출성형 CAE를 이용한 스파이럴 금형의 형상 검증에 관한 연구", 한국기계기술학회지, 23(2), pp.204~210 (2021), 한국기계기술학회[DOI]
- 한성렬, "형상 적응형 냉각채널 적용을 통한 카메라용 플라스틱 렌즈 후드의 변형 개선", 한국기계기술학회지, 21(1), pp.133~139 (2019), 한국기계기술학회[DOI]
- 이시욱, "핸드폰 카메라용 플라스틱 렌즈 사출성형의 복굴절 해석", 소성∙가공, 20(1), pp.54~59 (2011), 한국소성∙가공학회
- 이호상, "사출압축성형을 적용한 고해상도 폰 카메라용 플라스틱 렌즈 개발", 대한기계학회논문집 A, 37(1), pp.39~46 (2013), 대한기계학회
- 양동철, "인공신경망을 활용한 최적 사출성형조건 예측에 관한 연구", 소성∙가공, 29(4), pp.218~228 (2020), 한국소성∙가공학회
- 이준한, "사출성형공정에서 CAE 기반 품질 데이터와 실험 데이터의 통합 학습을 통한 인공지능 품질 예측 모델 구축에 대한 연구", Design & Manufacturing, 15(4), pp.24~31 (2021), 한국금형공학회[DOI]
- GAO, Y, "Surrogate-based Process Optimization for Reducing Warpage in Injection Molding", Journal of Materials Processing Technology, 209(3), pp.1302~1309 (2009)
- GAO, Y, "Adaptive Geometry and Process Optimization for Injection Molding using the Kriging Surrogate Model Trained by Numerical Simulation", Advances in Polymer Technology, 27(1), pp.1~16 (2008)
- AHMED, T, "Warpage Prediction of Injection-molded PVC Part using Ensemble Machine Learning Algorithm", Materials Today Proceedings (2020)
- CHEN. W. C, "An Integrated Parameter Optimization System for MISO Plastic Injection Molding,", The International Journal of Advanced Manufacturing Technology, 44(5-6), pp.501~511 (2009)
- 유민지, "사출성형조건이 용융수지의 유동선단에 미치는 영향의 수치해석적 연구", 한국기계기술학회지, 23(3), pp.366~371 (2021), 한국기계기술학회[DOI]