CPU 냉각성능 평가용 시스템 구축 및 공냉/수냉 방식 냉각특성 분석
An Experimental Study on Cooling Performance and Establishment of Environment for Air-cooled/Water-cooled CPU Performance Evaluation
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
For this study, we established a system for the CPU cooling performance evaluation and conducted performance tests on air-cooling and water-cooling to understand the effect of the CPU cooling method on performance. For the performance evaluation, the test chamber and water-cooling system were set up, the workload S/W was selected, and a case file was created. In the case of the air-cooling, the CPU temperature is sensitively affected by the outside air temperature, the direction of the board installation, and the influence of the airflow formed around it, and may cause a lot of fluctuations in the CPU temperature. When the water-cooling system was applied, the CPU temperature decreased from 75℃℃ to 37℃ compared to the air-cooled type under the test conditions of 28.5℃ and 3LPM cooling water supply temperature and flow rate. As the CPU clock speed increased due to the decrease in temperature, it was found that the job execution time was reduced by 15~23%. In the future, it is expected that using this performance evaluation environment established through this study will enable us to easily conduct test evaluations for various processors, cooling methods, and changes in operating conditions.
Abstract
For this study, we established a system for the CPU cooling performance evaluation and conducted performance tests on air-cooling and water-cooling to understand the effect of the CPU cooling method on performance. For the performance evaluation, the test chamber and water-cooling system were set up, the workload S/W was selected, and a case file was created. In the case of the air-cooling, the CPU temperature is sensitively affected by the outside air temperature, the direction of the board installation, and the influence of the airflow formed around it, and may cause a lot of fluctuations in the CPU temperature. When the water-cooling system was applied, the CPU temperature decreased from 75℃℃ to 37℃ compared to the air-cooled type under the test conditions of 28.5℃ and 3LPM cooling water supply temperature and flow rate. As the CPU clock speed increased due to the decrease in temperature, it was found that the job execution time was reduced by 15~23%. In the future, it is expected that using this performance evaluation environment established through this study will enable us to easily conduct test evaluations for various processors, cooling methods, and changes in operating conditions.
참고문헌 (12)
- S. Hamilton, "Intel research expands Moore's law", IEEE Computer Society, 36(1), pp.31~40 (2013)
- R. M. Eiland, "Thermo-mechanical Design Con- siderations at the Server and Rack Level to Achieve Maximum Data Center Energy Efficiency", Ph.D., pp.2015
- 윤준규, "히트싱크의 형상변화에 따른 테스크탑 PC용 CPU냉각의 열전달특성에 관한 연구", 한국기계기술학회지, 22(1), pp.99~106 (2020), 한국기계기술학회[DOI]
- 김성찬, "CPU 히트싱크에서 핀의 배열이 냉각성능에 미치는 영향에 대한 수치해석", 반도체디스플레이기술학회지, 15(3), pp.12~17 (2016), 한국반도체디스플레이기술학회
- 심재웅, "써멀 그리스의 열전달계수에 따른 CPU 온도변화에 관한 비교", 한국기계기술학회지, 23(2), pp.198~203 (2021), 한국기계기술학회[DOI]
- M. Matsuda, "Micro-channel Cold Plate Units for Cooling Super Computer", Fujikura Technical Review, pp.53~57 (2015)
- J. Gullbrand, "Liquid Cooling of Compute System", J. of Electronic Packaging, 141 (2019)
- S. Alkharabsheh, "Failure Analysis of Direct Cooling System in Data Centers", Proceedings of the ASME Int. Technical Conference and Exhibition on Package and Integration of Electronic and Photonic Microsystems (2017)
- P. Dubey, "Numerical Simulation of Flow over a Racing Motorbike using OpenFOAM", AIP Conference Proceedings, 2277(1), pp.030029~ (2020)
- D. Fintelman, "A Numerical Investigation of the Flow around a Motorbike when subjected to crosswinds", Engineering Applications of Computational Fluid Mechanics, 9(1), pp.528~542 (2015)
- Hewlett Packard Enterprise, "Engineer with Excellence-OpenFOAM Solution for CAE", HPC Application Performance Brochure, ~ (2018)
- AMD Datacenter Solutions, "AMD EPYC Using OpenFOAM Powering the Future of HPC", Advanced Micro Devices (2018)