데스크 탑 컴퓨터내에 팬의 형상별 유동 성능 해석에 관한 연구
A Study on Flow Performance Analysis by the Shape of Fan in Desktop Computer
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, by analyzing the flow rate and the pressure applied to the fan for the flow of air with room temperature into the fan in desktop computer, it was investigated which model was suitable for flow resistance. When comparing the speed distribution of air flow by model according to fan shape, model A was able to confirm that the fan performance was not good but the external flow was widely distributed. And model B was able to know that the performance was good but the external flow was smaller. Model C was found to have good performance and a wide distribution of outer flow. In cases of three models, it was equally shown that the pressure was highest on the blade side of the inlet where the air enters. Model B receives more pressure than models A and C when the same air flow rate is applied, so models A and C are considered more efficient cooling fans than model B. When considering the flow rates and the pressures acting on the model, model C is thought to have relatively good performance. By utilizing this study result, the flow rate and pressure are investigated without flow experiment by the shape of fan in desktop computer, and the flow capacity can be seen.
Abstract
In this study, by analyzing the flow rate and the pressure applied to the fan for the flow of air with room temperature into the fan in desktop computer, it was investigated which model was suitable for flow resistance. When comparing the speed distribution of air flow by model according to fan shape, model A was able to confirm that the fan performance was not good but the external flow was widely distributed. And model B was able to know that the performance was good but the external flow was smaller. Model C was found to have good performance and a wide distribution of outer flow. In cases of three models, it was equally shown that the pressure was highest on the blade side of the inlet where the air enters. Model B receives more pressure than models A and C when the same air flow rate is applied, so models A and C are considered more efficient cooling fans than model B. When considering the flow rates and the pressures acting on the model, model C is thought to have relatively good performance. By utilizing this study result, the flow rate and pressure are investigated without flow experiment by the shape of fan in desktop computer, and the flow capacity can be seen.
참고문헌 (10)
- 강현제, "자주포용 탄약 운반 궤도차량 도어힌지 용접부 구조강도 해석", 한국기계가공학회지, 15(3), pp.58~65 (2016), 한국기계가공학회[DOI]
- 박동환, "980MPa 초고장력 강판의 형상 동결성 향상을 통한 자동차 시트레일 부품 개발", 한국기계가공학회지, 15(5), pp.137~144 (2016), 한국기계가공학회[DOI]
- 조승제, "타워크레인 선회감속기용 유성기어 캐리어의 구조해석", 한국기계가공학회지, 13(5), pp.1~7 (2014), 한국기계가공학회[DOI]
- 정재웅, "메카넘휠 성능개선을 위한 일체형 설계 및 구조해석", 한국기계가공학회지, 13(2), pp.117~123 (2014), 한국기계가공학회[DOI]
- 조재웅, "욕실수전 내부에서의 유동 해석 연구를 통한 융합 기술연구", 한국융합학회논문지, 6(2), pp.37~42 (2015), 한국융합학회[DOI]
- 오범석, "스쿠터 시트의 내구성 해석에 관한 융합 연구", 한국융합학회논문지, 10(6), pp.165~170 (2019), 한국융합학회[DOI]
- 이정호, "배관의 신축이음에서의 유동해석을 통한 융합기술연구", 한국융합학회논문지, 6(3), pp.13~18 (2015), 한국융합학회[DOI]
- H. C. Lee, "A Study on Air Flow Analysis due to the Shape of Automotive Body", Journal of the Korea Convergence Society, 5(2), pp.19~23 (2014)
- 원찬식, "자동차용 제로터형 오일 펌프의 유동 해석", 한국유체기계학회 논문집, 6(4), pp.7~13 (2003), 한국유체기계학회
- 최창호, "터보펌프용 인듀서에 대한 캐비테이션 유동해석", 한국유체기계학회 논문집, 13(3), pp.49~53 (2010), 한국유체기계학회