히트싱크의 형상변화에 따른 테스크탑 PC용 CPU냉각의 열전달특성에 관한 연구
A Study on Heat Transfer Characteristics of Desktop PC CPU Cooling According to Variation of Heat Sink Shapes
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The purpose of this study is to analyze the temperature and heat resistance distribution, which is a criterion for evaluating the cooling performance, by using computer simulation of the cooling system combined with the CPU of the individual highest heat generation section, and use it as important data for the heat sink design. Using a single material of Al 6063-T5, which is an integral part of the desktop, fan and heat sink, fins and base, the analysis was carried out with various fin numbers, thicknesses, pitches and shapes of heat sinks. Ambient temperature, 25°C, heat source, 130W and cooling fan speed, 2500 rpm (50CFM) were used as boundary conditions, and heat transfer characteristics regarding temperature distribution and heat resistance were investigated using ANSYS Icepak. As a result, it has been found that as the number of fins of heat sink increases, the heat dissipation area increases to decrease heat resistance, and as the distance between each fin decreases, the ventilation resistance increases to decrease the flow intensity of the cooling air in contact with the heat dissipation area. The sunburst array also exhibits better heat transfer characteristics by obtaining a lower distribution of heat resistance with a cooling effect of about 10°C than the one-way basic array.
Abstract
The purpose of this study is to analyze the temperature and heat resistance distribution, which is a criterion for evaluating the cooling performance, by using computer simulation of the cooling system combined with the CPU of the individual highest heat generation section, and use it as important data for the heat sink design. Using a single material of Al 6063-T5, which is an integral part of the desktop, fan and heat sink, fins and base, the analysis was carried out with various fin numbers, thicknesses, pitches and shapes of heat sinks. Ambient temperature, 25°C, heat source, 130W and cooling fan speed, 2500 rpm (50CFM) were used as boundary conditions, and heat transfer characteristics regarding temperature distribution and heat resistance were investigated using ANSYS Icepak. As a result, it has been found that as the number of fins of heat sink increases, the heat dissipation area increases to decrease heat resistance, and as the distance between each fin decreases, the ventilation resistance increases to decrease the flow intensity of the cooling air in contact with the heat dissipation area. The sunburst array also exhibits better heat transfer characteristics by obtaining a lower distribution of heat resistance with a cooling effect of about 10°C than the one-way basic array.
참고문헌 (15)
- J. H. Kim, "CFD analysis in an electronic equipment cooling", Journal of Korean Society of Mechanical Engineers, 47(5), pp.63~66 (2007)
- C. A. Soule, "Future trends in heat sink design", Electronics Cooling, 7(1), pp.18~27 (2001)
- M. Vogel, "Low profile heat sink cooling technologies for next generation CPU thermal designs", Electronics Cooling, 11(1), pp.20~26 (2005)
- Y. H. Kim, "Numerical analysis of CPU cooling with variation of heat sink shape", Journal of The Institute of Information and Technology, 5, pp.8~14 (2003)
- J. H. Choi, "The flow and thermal behavior analysis on the cooling equipment for desktop PC CPUs", Proceedings of KSME Thermal-Fluid Engineering Spring Conference, pp.291~297 (2008)
- 최진태, "컴퓨터 CPU 냉각용 방열기 튜브 삽입길이에 따른 열유동 해석", 대한기계학회논문집 B, 35(2), pp.145~152 (2011), 대한기계학회
- K. C. Lee, "A study on the heat dissipation characteristics of layered heat sink for CPU cooling", Proceedings of SAREK Summer Conference, pp.182~187 (2006)
- 이동렬, "열전달 해석에 의한 파워 증폭기 방열기의 형상 최적화", 한국기계기술학회지, 13(3), pp.1~6 (2011), 한국기계기술학회[DOI]
- 임송철, "뉴 디자인된 히트싱크의 열 유동 현상 컴퓨터 시뮬레이션", 한국재료학회지, 14(11), pp.775~779 (2004), 한국재료학회
- 정태성, "히트싱크의 자연대류 열유동 특성 분석", 대한기계학회논문집 B, 37(1), pp.27~33 (2013), 대한기계학회
- 차동안, "컴퓨터 CPU 냉각용 방열기의 열유동특성에 관한 연구", 설비공학 논문집, 23(1), pp.1~7 (2011), 대한설비공학회
- "ANSYS 15.0 Icepak Manual", ~ (2014)
- E. Ozturk, "CFD modeling of forced cooling of computer chassis", Eng. Applications of Computer Fluid Mechanics, 1(4), pp.304~313 (2007)
- S. Sierila, "CFD modeling of ventilation in an educational institute", Proceedings of Clima 2007 WellBeing Indoors (2007)
- 김정현, "히트싱크 베이스의 두께 변화가 방열성능에 미치는 영향", 한국산학기술학회논문지, 15(8), pp.4749~4755 (2014), 한국산학기술학회[DOI]