광경화 방식 적층 조형물의 표면 금속 코팅에 의한 기계적 특성 변화 분석
Study on Change in Mechanical Properties by Metal Coating on the Surface of Additively Manufactured Model by Stereo-Lithography
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This research measured the change in mechanical characteristics of a sample obtained by finishing a metal coating to an engineering plastic manufactured using a 3D printer to satisfy both lightweight and quality characteristics. High-Temp material, which can be applied to space thermal environments with large temperature fluctuations, was applied as the engineering plastic material, and Stereolithography(SLA) method, which has relatively higher precision than Fused Film Fabrication(FFF) method, was selected as the manufacturing method. Electroless & electroplating were performed by metal coating on the surface to satisfy the characteristics of products requiring electrical conductivity. Tensile and bending tests were conducted to verify a change in the mechanical characteristics of a sample completed with a metal coating, and an adhesion test of the metal coating was also added.
Abstract
This research measured the change in mechanical characteristics of a sample obtained by finishing a metal coating to an engineering plastic manufactured using a 3D printer to satisfy both lightweight and quality characteristics. High-Temp material, which can be applied to space thermal environments with large temperature fluctuations, was applied as the engineering plastic material, and Stereolithography(SLA) method, which has relatively higher precision than Fused Film Fabrication(FFF) method, was selected as the manufacturing method. Electroless & electroplating were performed by metal coating on the surface to satisfy the characteristics of products requiring electrical conductivity. Tensile and bending tests were conducted to verify a change in the mechanical characteristics of a sample completed with a metal coating, and an adhesion test of the metal coating was also added.
참고문헌 (11)
- 김진희, "지구저궤도 고정밀 관측위성 구조 및 열 개발모델 설계", 해석, 2005, pp.33(8), 99~104[DOI]
- G. P. Le Sage, "3D Printed Waveguide Slot Array Antennas", IEEE Access, 4, pp.1~1 (2016)[DOI]
- 이용선, "FDM 방식의 3D 프린팅 적층조건에 따른 PLA 소재의 인장특성에 대한 고찰", 한국기계기술학회지, 24(4), pp.591~596 (2022), 한국기계기술학회[DOI]
- "Effects of Electroplating on the Mechanical Properties of Stereolithography and Laser Sintered Parts" (2019)[URL]
- Erik G. Geterud, "Lightweight Waveguide and Antenna Components Using Plating on Plastics", 7th Europian Conference on Antennas and Propagation(EuCAP) (2013)
- Carkaci ME, "Design and prototype manufacturing of a feed system for Ku-band satellite communication by using 3D FDM", PLA printing and conductive paint technology, 2020, pp.30, e22062~
- Mithun. V. Kulkarni, "Development of Electroplating Setup for Plating ABS Plastics", i-manager’s Journal on Mechanical Engineering, 2(3), pp.52~57 (2012)
- Naveen Kumar T. V, "Effects of Electroplaing on the Mechanical Properties of FDM-PLA Parts", i-manager’s Journal on Future Engineering & Technology, 10(3), pp.28~36 (2015)
- Azhar Equbal, "Electroless Plating on Plastic", International Journal of Scientific & Engineering Research, 4 (2013)
- J. R. Arnold, "High Quality Copper-Nickel_ chrominium Plating on Plastics : A Continuous Process & its Challenges", Plating & Surface Finishing, pp.38~47 (2004)
- 조연식, "하도에 따른 도장특성에 관한 시험적 연구", 한국기계기술학회지, 18(2), pp.301~305 (2016), 한국기계기술학회[DOI]