구조해석을 통한 SUV 자동차용 연료탱크 구성부품의 영향성 평가에 대한 연구
Effect Study of SUV Automotive Fuel Tank Components by Structural Safety Simulation
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this study, the design of fuel tanks for SUVs (sports utility vehicles) was dealt with through structural analysis. Fuel tank analysis was performed to evaluate safety, and improvement plans for weak areas were found and reflected in the design. In addition, strength analysis and pressure analysis were performed in parallel to solve the problem of oil leakage around the lower part of the fuel tank and the rear mounting that occurred during the endurance test, and the analysis results were reflected in the design. As a result of analysis through various design changes, it was possible to present an appropriate reinforcement flange shape. In addition, when the thickness of the fuel tank was changed from 1.0mm to 0.8mm, the stiffness of the fuel tank decreased by approximately 30%, and reinforcement was required.
Abstract
In this study, the design of fuel tanks for SUVs (sports utility vehicles) was dealt with through structural analysis. Fuel tank analysis was performed to evaluate safety, and improvement plans for weak areas were found and reflected in the design. In addition, strength analysis and pressure analysis were performed in parallel to solve the problem of oil leakage around the lower part of the fuel tank and the rear mounting that occurred during the endurance test, and the analysis results were reflected in the design. As a result of analysis through various design changes, it was possible to present an appropriate reinforcement flange shape. In addition, when the thickness of the fuel tank was changed from 1.0mm to 0.8mm, the stiffness of the fuel tank decreased by approximately 30%, and reinforcement was required.
참고문헌 (9)
- 김기주, "컴퓨터 시뮬레이션(CAE)을 이용한 자동차용 리어 서브-프레임의 하이드로-포밍 공정 개발", 한국자동차공학회 논문집, 16(3), pp.38~43 (2008), 한국자동차공학회
- F. Dohmann, "Tube hydroforming-research and practical application", J. Mater. Process. Tech, 71, pp.174~186 (1997)
- 김기주, "컴퓨터 시뮬레이션(CAE)을 이용한 자동차용 엔진 크레들의 하이드로-포밍 공정 연구", 한국자동차공학회 논문집, 16(1), pp.86~92 (2008), 한국자동차공학회
- 김기주, "컴퓨터 시뮬레이션(CAE)을 이용한 자동차용 AA6061 리어 서브-프레임 사이드멤버의 하이드로-포밍 공정 개발", 한국자동차공학회 논문집, 18(5), pp.45~49 (2010), 한국자동차공학회
- 성창원, "자동차용 리어서브-프레임크로스멤버의 하이드로포밍 가공 시뮬레이션", 한국기계기술학회지, 10(2), pp.9~13 (2008), 한국기계기술학회[DOI]
- M. Cerit, "Temperature and thermal stress analyses of a ceramic-coated aluminum alloy piston used in a diesel engine", International Journal of Thermal Sciences, 77, pp.11~18 (2014)
- B. Zhao, "Thermal Stress Analysis of Ceramic-Coated Diesel Engine Pistons on the Wavelet Finite-Element Method", Journal of Engineering Mechanics, 138(1), pp.143~149 (2012)
- 김기주, "CAE를 이용한 자동차용 휠캐리어의 경량 설계", 한국기계기술학회지, 18(4), pp.543~549 (2016), 한국기계기술학회[DOI]
- 김기주, "CAE 정적해석을 통한 자동차용 Torque Strut의내구 안전 설계", 한국기계기술학회지, 18(5), pp.694~699 (2016), 한국기계기술학회[DOI]