구조해석을 통한 SUV 자동차용 연료탱크 구성부품의 균열방지 설계 연구
Crack Prevention Design Research of Automotive SUV Reservoir Tank Components Through Structural Analysis
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, In this study, structural analysis of a fuel tank for an SUV (sports utility vehicle) was performed for crack prevention design. Reservoir tank analysis was conducted for crack prevention design, and improvement measures for weak areas were discovered and reflected in the design. Pressure analysis was performed on the existing model to analyze weak areas. As a result of analysis through various design changes, it was found that the strength problem of the reservoir tank was due to the discontinuity of the rib inside the tank, and to improve this, it was necessary to minimize the discontinuity section.
Abstract
In this study, In this study, structural analysis of a fuel tank for an SUV (sports utility vehicle) was performed for crack prevention design. Reservoir tank analysis was conducted for crack prevention design, and improvement measures for weak areas were discovered and reflected in the design. Pressure analysis was performed on the existing model to analyze weak areas. As a result of analysis through various design changes, it was found that the strength problem of the reservoir tank was due to the discontinuity of the rib inside the tank, and to improve this, it was necessary to minimize the discontinuity section.
참고문헌 (9)
- 이재웅, "구조해석을 통한 SUV 자동차용 연료탱크 구성부품의 영향성 평가에 대한 연구", 한국기계기술학회지, 25(2), pp.137~141 (2023), 한국기계기술학회[DOI]
- K. J. Kim, "Hydro-forming Process of Automotive Rear Sub-frame by Computer Aided Engineering(CAE)", KSAE, 16(3), pp.38~43 (2008)
- 김기주, "컴퓨터 시뮬레이션(CAE)을 이용한 자동차용 엔진 크레들의 하이드로-포밍 공정 연구", 한국자동차공학회 논문집, 16(1), pp.86~92 (2008), 한국자동차공학회
- 김기주, "컴퓨터 시뮬레이션(CAE)을 이용한 자동차용 AA6061 리어 서브-프레임 사이드멤버의 하이드로-포밍 공정 개발", 한국자동차공학회 논문집, 18(5), pp.45~49 (2010), 한국자동차공학회
- 성창원, "자동차용 리어서브-프레임크로스멤버의 하이드로포밍 가공 시뮬레이션", 한국기계기술학회지, 10(2), pp.9~13 (2008), 한국기계기술학회[DOI]
- M. Cerit, "Temperature and thermal stress analyses of a ceramic-coated aluminum alloy piston used in a diesel engine", International Journal of Thermal Sciences, 77, pp.11~18 (2014)
- B. Zhao, "Thermal Stress Analysis of Ceramic-Coated Diesel Engine Pistons on the Wavelet Finite-Element Method", Journal of Engineering Mechanics, 138(1), pp.143~149 (2012)
- 김기주, "CAE를 이용한 자동차용 휠캐리어의 경량 설계", 한국기계기술학회지, 18(4), pp.543~549 (2016), 한국기계기술학회[DOI]
- 김기주, "CAE 정적해석을 통한 자동차용 Torque Strut의내구 안전 설계", 한국기계기술학회지, 18(5), pp.694~699 (2016), 한국기계기술학회[DOI]