금형 한계수명 정량예측 기법 활용 볼스터드 부품 다단냉간 단조공정 최적설계
Optimal Design of Multi-Stage Cold Forging Process for Ball Stud Parts using Quantitative Prediction of the Limiting Life Cycle of the Die
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Most of automobile steering parts are manufactured through the multi-stage cold forging process using round-bar drawn materials. The same process is applied to the ball stud parts of the outer ball joint, and various research activities are being carried out to reduce the extreme manufacturing cost in order to survive in the limitless competition. In this paper, we present a quantitative prediction method for the limiting life of the die as a method for cost reduction in the multi-stage cold forging process. The load on the die was minimized by distributing the forming load based on process optimization through finite element analysis. In addition, based on the quantitative prediction algorithm of the limiting life of the die, the application of the split die and the optimization of the phosphate treatment of the material surface are presented as a conclusion as a method to improve the limiting life of the die.
Abstract
Most of automobile steering parts are manufactured through the multi-stage cold forging process using round-bar drawn materials. The same process is applied to the ball stud parts of the outer ball joint, and various research activities are being carried out to reduce the extreme manufacturing cost in order to survive in the limitless competition. In this paper, we present a quantitative prediction method for the limiting life of the die as a method for cost reduction in the multi-stage cold forging process. The load on the die was minimized by distributing the forming load based on process optimization through finite element analysis. In addition, based on the quantitative prediction algorithm of the limiting life of the die, the application of the split die and the optimization of the phosphate treatment of the material surface are presented as a conclusion as a method to improve the limiting life of the die.
참고문헌 (14)
- Guo D., "Synchroperation in industry 4.0 manufacturing", Int. J. Prod. Eco, 238, pp.1~13 (2021)
- Wang. Z. G., "A testing method of cold forging performance of steel wire", CIRP Annals, 69, pp.281~284 (2020)
- Dalbosco M., "Improving fatigue life of cold forging dies by finite element analysis: A case study", J. of Manufacturing Processing, 64, pp.349~355 (2021)
- Hawryluk M., "Review of selected methods of increasing the life of forging tools in hot die forging processes", Arch. Civ. Mech. Eng, 16, pp.845~866 (2016)
- Tanrıkulu B., "Fatigue life prediction model of WC-Co cold forging dies based on experimental and numerical studies", Eng. Fail. Analysis, 118, pp.1~11 (2020)
- Geiger M., "Prediction of service life and failure probability of cold forging tools", CIRP Annals-Manufacturing Technol, 50, pp.173~176 (2001)
- Saroosh, M. A., "High cycle fatigue life prediction of cold forging tools based on workpiece material property", J. of Mater. Processing Technol, 191, pp.178~181 (2007)
- Falk B., "Estimation of tool life in bulk metal forming based on different failure concepts", J. of Mater. Processing Technol, 80, pp.602~607 (1998)
- Fu M. W., "Die fatigue life design and assessment via CAE simulation", The Int. J. of Advanced Manufacturing Technol, 35, pp.843~851 (2008)
- Lee Y. -C., "Fatigue life of cold- forging dies with various values of hardness", J. of Mater. Processing Technol, 113, pp.539~543 (2001)
- 서영호, "실시간 성형하중 계측을 통한 냉간단조 금형수명 정량예측 정밀도 향상 연구", 소성∙가공, 30(4), pp.172~178 (2021), 한국소성∙가공학회[DOI]
- 서영호, "냉간단조 금형수명 정량예측 기술 기반 자동차 조향부품 제조원가 예측 및 저감방안 연구", 한국기계기술학회지, 22(4), pp.726~732 (2020), 한국기계기술학회[DOI]
- "ASTM Standard E8. Standard test methods for tension testing of metallic materials", ASTM International, ~ (2013)
- 서영호, "Wire rod 소재의 인산염 피막 손상과 마찰계수의 정량적 분석 연구", 한국기계기술학회지, 23(6), pp.1053~1058 (2021), 한국기계기술학회[DOI]