대형 Flange bolt의 냉간단조 성형공법 적용에 관한 연구
A Study of the Application of Cold Forging Technique for a Big Flange Bolton coupling
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Due to increasing demands for environmental protection and cost reduction, the application of cold forging technology in the production of large-sized flange bolts, which was mainly manufactured through hot forging, has become necessary. An investigation was conducted on the die design of preform dies for cold forging a large-sized flange bolt. The die design, which utilized the upsetting process, was determined insufficient due to the excessive principal stress exerted on the die. Nevertheless, the die design utilized in the trimming process showed its compatibility with the cold forging of the flange bolt. The die design was evaluated using the Finite Element Method (FEM) to identify the most optimal state in terms of the preform die's outer diameter. As a result, the results of the study have been applied to the actual manufacturing process, leading to the creation of a forging die with an extended lifespan.
Abstract
Due to increasing demands for environmental protection and cost reduction, the application of cold forging technology in the production of large-sized flange bolts, which was mainly manufactured through hot forging, has become necessary. An investigation was conducted on the die design of preform dies for cold forging a large-sized flange bolt. The die design, which utilized the upsetting process, was determined insufficient due to the excessive principal stress exerted on the die. Nevertheless, the die design utilized in the trimming process showed its compatibility with the cold forging of the flange bolt. The die design was evaluated using the Finite Element Method (FEM) to identify the most optimal state in terms of the preform die's outer diameter. As a result, the results of the study have been applied to the actual manufacturing process, leading to the creation of a forging die with an extended lifespan.
참고문헌 (11)
- Archard, J. F, "Contact and rubbing of flat surfaces", Journal of applied physics, pp.981~988 (1953)
- He B., "Low-Carbon conceptual Design based on Product Life Cycle Assesment", The International Journal of Advanced Manufacturing Technology, 81, pp.863~874 (2015)
- Engel, U., "FEM-Simulation of Fatigue Crack Growth in Cold Forging Dies", Adv. Tech. Plast, 1, pp.355~360 (1990)
- Kragelsky, I. V, "Friction, Wear, Lubrication, Tribology Handbook, Vol. 1" (1981), Pergamon Press
- Kim, T. K., "The Application of Finite Element Method for the Improvement of the Dimensional Accuracy of Cold Forged Products", Doctor, pp.1997
- Singh, A. K., "Factors Affecting Die Wear", Wear, 25, pp.271~279 (1973)
- Davis, J. R., "Alloying : Understanding the Basics", pp.123~192 (2001), ASM international
- Lee, K. S., "A Study on the Optimum Shearing Clearance of SCr440 Steel Rod for Track Pin", Korean Society for Power System Engineering, 26(4), pp.12~19 (2022)
- Harris, S. R., "Influence of Spheroidizing Heat Treatment on Mechanical Properties of EN47 steel", Materials Science Forum, 880, pp.136~139 (2016)
- Choi, D. S,, "Titanium alloy bolt hot forging process analysis through plastic working analysis", Design & Manufacturing, 14, pp.42~48 (2020)
- Lee, K. S., "Study on the Optimum Design of the Insert Ring and Shrunk Ring of the Cold Forging Die for an Automotive Wheel Nut", Transactions of Materials Processing, 27(3), pp.165~170 (2018)