실내환경 조건에 따른 히트펌프 건조기의 운전특성 연구
Study on the Operation Characteristics of Heat Pump Dryer according to Indoor Environmental Conditions
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, the operating performance of the heat pump dryer using the PF heat exchanger was experimentally studied. The capacity, COP, drain, SMER and operating status of the cooling cycle of the heat pump dryer were investigated according to the temperature, relative humidity and flow rate of the indoor air. Heat pump dryers are refrigerant-air system. For the dryer performance experiment, an air enthalpy calorimeter was used. From the experimental results, as the temperature, relative humidity, and flow rate of the inlet air increased, the capacity, COP, drain, SMER of the dryer increased. The change in the performance of the dryer was most affected by temperature. The P-h diagram of the cooling system showed that the operation status of the dryer was greatly affected by the indoor temperature. In addition, the SMER of the dryer showed a drying performance of about 3.38 kg/kWh or more within all experimental ranges.
Abstract
In this study, the operating performance of the heat pump dryer using the PF heat exchanger was experimentally studied. The capacity, COP, drain, SMER and operating status of the cooling cycle of the heat pump dryer were investigated according to the temperature, relative humidity and flow rate of the indoor air. Heat pump dryers are refrigerant-air system. For the dryer performance experiment, an air enthalpy calorimeter was used. From the experimental results, as the temperature, relative humidity, and flow rate of the inlet air increased, the capacity, COP, drain, SMER of the dryer increased. The change in the performance of the dryer was most affected by temperature. The P-h diagram of the cooling system showed that the operation status of the dryer was greatly affected by the indoor temperature. In addition, the SMER of the dryer showed a drying performance of about 3.38 kg/kWh or more within all experimental ranges.
참고문헌 (8)
- Gaku, H., "Development of high-performance heat exchangers for air conditioners", Journal of the KSME, 54(5), pp.49~53 (2014)
- Shin, H. S., "A study on the performance characteristic with respect to design variables of heat pump clothes dryer", Proceedings of Korean Society of Mechanical Engineers, pp.32~ (2021)
- Bae, S. H., "The development of the folding multi-purpose smart crop dryer", Journal of the Korea Academia-Industrial cooperation Society, 22(10), pp.11~16 (2021)
- Lee, H. M, "Analysis of power consumption according to drying conditions of polymer pellet dryer using microwave", Proceedings of Korean Society for Precision Engineering, pp.723~ (2021)
- Wang, Z. H., "Study on the internal horizontal flow uniformity of hot air dryer with 3-zones", Korean Society of Mechanical Technology, 21(6), pp.1125~1130 (2019)
- Kwon, Y. C., "Experimental study of performance characteristics of heat pump dryer", Korean Society of Mechanical Technology, 23(6), pp.997~1003 (2021)
- "KS C 9306, Air-conditioner", ~ (2011)
- Kudra, T., "Advanced drying technologies" (2002), Marcel Dekker. Inc