히트펌프식 건조기의 성능특성에 대한 실험연구
Experimental Study on Performance Characteristics of Heat Pump Dryer
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In order to study the drying performance of the dryer, the performance characteristics of the heat pump dryer applied a PF heat exchanger is applied were experimentally investigated. The capacity, COP, drain and SMER of the dryer were measured by the refrigerant charge and EEV opening. Heat pump dryers are refrigerant-air systems. For the dryer performance test, an air enthalpy calorimeter was used. From the experimental results, the heat exchanger performances according to the change in the refrigerant charge and EEV opening were the maximum at 0.5kg refrigerant and 30% EEV opening, respectively. In addition, SMER suggested a satisfactory level of drying performance. This shows that the refrigeration cycle of the dryer must be operated at an appropriate refrigerant amount and EEV opening degree to secure optimal drying performance. On the other hand, the time to reach the target setting temperature of the dryer was increased by about 2.5 times depending on with/without the sample.
Abstract
In order to study the drying performance of the dryer, the performance characteristics of the heat pump dryer applied a PF heat exchanger is applied were experimentally investigated. The capacity, COP, drain and SMER of the dryer were measured by the refrigerant charge and EEV opening. Heat pump dryers are refrigerant-air systems. For the dryer performance test, an air enthalpy calorimeter was used. From the experimental results, the heat exchanger performances according to the change in the refrigerant charge and EEV opening were the maximum at 0.5kg refrigerant and 30% EEV opening, respectively. In addition, SMER suggested a satisfactory level of drying performance. This shows that the refrigeration cycle of the dryer must be operated at an appropriate refrigerant amount and EEV opening degree to secure optimal drying performance. On the other hand, the time to reach the target setting temperature of the dryer was increased by about 2.5 times depending on with/without the sample.
참고문헌 (11)
- Shin, H. S., "A Study on the Performance Characteristic with respect to Design Variables of Heat Pump Clothes Dryer", Proceedings of Korean Society of Mechanical Engineers, pp.32~ (2021)
- 김부철, "홍고추 건조 시 건조기의 건조 에너지에 관한 연구", 설비공학 논문집, 33(10), pp.485~493 (2021), 대한설비공학회[DOI]
- 배성현, "폴딩형 다용도 스마트 농작물 건조기 개발", 한국산학기술학회논문지, 22(10), pp.11~16 (2021), 한국산학기술학회[DOI]
- Lee, H. M., "Analysis of Power Consumption according to Drying Conditions of Polymer Pellet Dryer using Microwave", Proceedings of Korean Society for Precision Engineering, pp.723~ (2021)
- 오상민, "열풍건조기의 내부 공기유로 개선을 위한 연구", 설비공학 논문집, 31(9), pp.404~410 (2019), 대한설비공학회[DOI]
- 왕쩐후안, "3실 열풍 건조기의 내부 수평유동 균일성에 관한 연구", 한국기계기술학회지, 21(6), pp.1125~1130 (2019), 한국기계기술학회[DOI]
- Choi, J., "A Dynamic Behavior Analysis of a Heat Pump Dryer", Proceedings of Korean Society of Mechanical Engineers, pp.421~423 (2020)
- "KS C 9306, Air-conditioner", ~ (2011)
- Kudra, T., "Advanced Drying Technologies" (2002), Marcel Dekker. Inc
- "KS B 8122, Gas clothes dryer", ~ (2017)
- "KS B 7944, Agricultural products dryer", ~ (2007)