Development of High-Temperature Solders: Contribution of Transmission Electron Microscopy
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This article brieḀy reviews the results of recently reported research on high-temperature Pb-free solder alloys and the research trend for characterization of the interfacial reaction layer. To improve the product reliability of high-temperature Pb-free solder alloys, thorough research is necessary not only to enhance the alloy properties but also to characterize and understand the interfacial reaction occurring during and after the bonding process. Transmission electron microscopy analysis is expected to play an important role in the development of high-temperature solders by providing accurate and reliable data with a high spatial resolution and facilitating understanding of the interfacial reaction at the solder joint.
Abstract
This article brieḀy reviews the results of recently reported research on high-temperature Pb-free solder alloys and the research trend for characterization of the interfacial reaction layer. To improve the product reliability of high-temperature Pb-free solder alloys, thorough research is necessary not only to enhance the alloy properties but also to characterize and understand the interfacial reaction occurring during and after the bonding process. Transmission electron microscopy analysis is expected to play an important role in the development of high-temperature solders by providing accurate and reliable data with a high spatial resolution and facilitating understanding of the interfacial reaction at the solder joint.
참고문헌 (37)
- Aksoz S, "Determination of thermal conductivity and interfacial energy of solid Zn solition in the Zn-Al-Bi eutectic system", Exp. Therm. Fluid. Sci, 35, pp.395~404 (2011)
- Chen S W, "Lowering of Sn-Sb alloy melting points caused by substrate dissolution", J. Electron. Mater, 35, pp.1982~1985 (2006)
- Chen S W, "Interfacial reactions in the Sn-Sb", Ag and Sn-Sb, Mater. Chem. Phys, pp.2008, 111[DOI]
- Cheng F, "Sn addition on the tensile properties of high temperature Zn-4Al-3Mg solder alloys", Microelectron. Reliab, 52, pp.579~584 (2012)
- El-Daly A A, "Microstructural evolution and tensile properties of Sn-5Sb solder alloy containing small amount of Ag and Cu", J. Alloy. Compd, 509, pp.4574~4582 (2011)
- El-Daly A A, "Creep behavior of near-peritectic Sn-5Sb solders containing small amounts of Ag and Cu", Mater. Sci. Eng. A, 528, pp.1055~1062 (2011)
- Gancarz T, "Thermal properties and wetting behavior of high temperature Zn-Al-In solders", J. Mater. Eng. Perform, 21, pp.599~605 (2012)
- Geranmayeh A R, "Power law identation creep of Sn-5%Sb solder alloy", J. Mater. Sci, 40, pp.3361~3366 (2005)
- Haque A, "Die attach properties of Zn-Al-Mg-Ga based high-temperature lead-free solder on Cu lead-frame", J. Mater. Sci.: Mater. Electron, 23, pp.115~123 (2012)
- Haque A, "Investigations on Zn-Al-Ge alloys as high temperature die attach material", Electronic System-Integration Technology Conference (ESTC), 3, pp.1~5 (2010)
- Haque A, "Effect of Ni metallization on interfacial reactions and die attach properties of Zn-Al-Mg-Ga high temperature lead-free solder", Electronic Manufacturing Technology Conference, 34, pp.1~6 (2010)
- Hui W, "Interfacial structure and mechanical properties of aluminium foam joints fluxless-soldered with Zn-Al-Cu base alloy", Acta Metall. Sin, 45, pp.723~728 (2009)
- Iseki T, "Development of Bi-based Pb-free solders for high-temperature", J. Jpn. Inst. Electron. Pack, 15, pp.153~157 (2012)
- Kang N H, "Alloy design of Zn-Al-Cu solder for ultra high temperatures", J. Alloy. Compd, 467, pp.246~250 (2009)
- Karakaya I, "The Ag-Bi (silver-bismuth) system", J. Phase Equilib, 14, pp.525~530 (1993)
- Kim S J, "Characteristics of Zn-Al-Cu alloys for high temperature solder application", Mater. Trans, 49, pp.1531~1536 (2008)
- Kim S, "Interfacial reaction and die attach properties of Zn-Sn high-temperature solders", J. Electron. Mater, 38, pp.266~272 (2009)
- Kim S, "Improving the reliability of Si die attachment with Zn-Sn-based high-temperature Pb-free solder using a TiN diffusion barrier", J. Electron. Mater, 38, pp.2688~2675 (2009)
- Lee J E, "Interfacial properties of Zn-Sn alloys as high temperature lead-free solder on Cu substrate", Mater. Trans, 46, pp.2413~2418 (2005)
- Mahmudi R, "Inpression creep behavior of Zn-Sn hightemperature lead-free solders", J. Electron. Mater, 39, pp.2495~2502 (2010)
- Moser Z, "The Sn-Zn (tin-zinc)system", Bull. Alloy Phase Diagrams, 6, pp.330~334 (1985)
- Murray J L, "The Al-Zn (aluminum-zinc) system", Bull. Alloy Phase Diagrams, 4, pp.55~73 (1983)
- Okamoto H, "Sb-Sn (antimony-tin)", J. Pahse Equilib. Diff, 33, pp.347~ (2012)
- Santos W L R, "Platelike cell growth during directional solidification of a Zn-20wt%Sn hightemperature lead-free solder alloy", Mater. Sci. Eng. B, 182, pp.29~36 (2014)
- Shi Y, "Investigation of rare earthdoped BiAg high-temperature solders", J. Mater. Sci.-Mater. El, 21, pp.875~881 (2010)
- Shimizu T, "Zn-Al-Mg-Ga alloys as Pb-free solder for die-attaching use", J. Electron. Mater, 28, pp.1172~1175 (1999)
- Song J M, "Thermal and tensile properties of Bi-Ag alloys", Metall. Mater. Trans. A, 38, pp.1371~1375 (2007)
- Song J M, "Interfacial reactions between Bi-Ag high-temperature solders and metallic substrates", J. Electron. Mater, 35, pp.1041~1049 (2006)
- Song J M, "Substrate dissolution and shear properties of the joints between Bi-Ag alloys and Cu substrate for high-temperature soldering applications", J. Electron. Mater, 36, pp.1516~1523 (2007)
- Stadelmann P A, "EMS-a software package for electron diffraction analysis and HREM image simulation in materials science", Ultramicroscopy, 21, pp.131~145 (1987)
- Suganuma K, "Lead-Free Soldering in Electronics" (2004), Marcel Dekker
- Suganuma K, "High-temperature lead-free solders: properties and possibilities", JOM-US, 61, pp.64~71 (2009)
- Takahashi T, "Improvement of high-temperature performance of Zn-Sn solder joint", J. Electron. Mater, 39, pp.1241~1247 (2010)
- Takaku Y, "Interfacial reaction between Cu substrates and Zn-Al base high-temperature Pbfree solders", J. Electron. Mater, 37, pp.314~323 (2008)
- Takaku Y, "Interfacial reaction between Zn-Al-based high-temperature solders and Ni substrate", J. Electron. Mater, 38, pp.54~60 (2009)
- Vianco P T, "Solder technology for ultra high temperatures", Weld. J, 81, pp.51~54 (2002)
- Wang C, "Interfacial reactions of high-temperature Zn-Sn solders with Ni substrate", Mater. Chem. Phys, 136, pp.325~333 (2012)
