전자 패키징용 고신뢰성 나노입자 강화솔더
High reliability nano-reinforced solder for electronic packaging
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In the soldering industry, a variety of lead-free solders have been developed as a part of restricting lead in electronic packaging. Sn-Ag-Cu (SAC) lead-free solder is regarded as one of the most superior candidates, owing to its low melting point and high solderability as well as the mechanical property. On the other hand, the mechanical property of SAC solder is directly influenced by intermetallic compounds (IMCs) in the solder joint. Although IMCs in SAC solder play an important role in bonding solder joints and impart strength to the surrounding solder matrix, a large amount of IMCs may cause poor strength, due to their brittle nature. In other words, the mechanical properties of SAC solder are of some concern because of the formation of large and brittle IMCs. As the IMCs grow, they may cause poor device performance, resulting in the failure of the electronic device. Therefore, new solder technologies which can control the IMC growth are necessary to address these issues satisfactorily. There are an advanced nanotechnology for microstructural refinement that lead to improve mechanical properties of solder alloys with nanoparticle additions, which are defined as nano-reinforced solders. These nano-reinforced solders increase the mechanical strength of the solder due to the dispersion hardening as well as solderability of the solder. This paper introduces the nano-reinforced solders, including its principles, types, and various properties.
Abstract
In the soldering industry, a variety of lead-free solders have been developed as a part of restricting lead in electronic packaging. Sn-Ag-Cu (SAC) lead-free solder is regarded as one of the most superior candidates, owing to its low melting point and high solderability as well as the mechanical property. On the other hand, the mechanical property of SAC solder is directly influenced by intermetallic compounds (IMCs) in the solder joint. Although IMCs in SAC solder play an important role in bonding solder joints and impart strength to the surrounding solder matrix, a large amount of IMCs may cause poor strength, due to their brittle nature. In other words, the mechanical properties of SAC solder are of some concern because of the formation of large and brittle IMCs. As the IMCs grow, they may cause poor device performance, resulting in the failure of the electronic device. Therefore, new solder technologies which can control the IMC growth are necessary to address these issues satisfactorily. There are an advanced nanotechnology for microstructural refinement that lead to improve mechanical properties of solder alloys with nanoparticle additions, which are defined as nano-reinforced solders. These nano-reinforced solders increase the mechanical strength of the solder due to the dispersion hardening as well as solderability of the solder. This paper introduces the nano-reinforced solders, including its principles, types, and various properties.
참고문헌 (28)
- 정도현, "Wetting Balance Test를 이용한 솔더의 젖음성 분석", 마이크로전자 및 패키징학회지, 24(2), pp.1~9 (2017), 한국마이크로전자및패키징학회
- 정도현, "고속전단시험의 표준화를 위한 Sn3.0Ag0.5Cu 솔더볼의 전단특성", 마이크로전자 및 패키징학회지, 18(1), pp.35~39 (2011), 한국마이크로전자및패키징학회
- 조승현, "수치해석을 이용한 임베딩 패키지 솔더 조인트의 신뢰성에 미치는 에이징 효과 연구", 마이크로전자 및 패키징학회지, 25(1), pp.17~22 (2018), 한국마이크로전자및패키징학회
- A. Sharma, "Microstructure and brazeability of SiC nanoparticles reinforced Al-9Si -20Cu produced by induction melting", Mater. Sci. Technol., 32(8), pp.773~ (2016)
- D. H. Jung, "Influence of dual ceramic nanomaterials on the solderability and interfacial reactions between lead-free Sn-Ag-Cu and a Cu conductor", J. Alloy. Compd., 743(30), pp.300~ (2018)[DOI]
- Ashutosh Sharma, "Aluminium Based Brazing Fillers for High Temperature Electronic Packaging Applications", 마이크로전자 및 패키징학회지, 22(4), pp.1~5 (2015), 한국마이크로전자및패키징학회
- A. Yakymovych, "Nanocomposite SAC solders: the effect of adding Ni and Ni-Sn nanoparticles on morphology and mechanical properties of Sn-3.0Ag-0.5Cu solders", J. Electron. Mater., 47(1), pp.117~ (2018)[DOI]
- K. Bukat, "Silver nanoparticles effect on the wettability of Sn-Ag-Cu solder pastes and solder joints microstructure on copper", Solder. Surf. Mount Technol., 23(3), pp.150~ (2011)[DOI]
- A. Nadia, "Understanding the effects of addition of copper nanoparticles to Sn-3.5 Ag solder", Solder. Surf. Mount Technol., 23(2), pp.68~ (2011)[DOI]
- L. Y. Hsiao, "Synthesis and application of novel lead-free solders derived from Snbased nanopowders", Proc. 7th IEEE CPMT Int. Conf. on Electronics Packaging Technology, pp.358~ (2006)
- B. Guo, "Effect of <TEX>$Ag_{3}Sn$<", TEX> nanoparticles and temperature on <TEX>$Cu_{6}Sn_{5}$<, Cu solder joints, pp.Mater. Res. Bull., 2018[DOI]
- A. Daly, "The effect of undercooling on the microstructure and tensile properties of hypoeutectic Sn–6.5Zn–xCu Pb-free solders", Mater. Des., 80(5), pp.152~ (2015)[DOI]
- J. P. Jung, "Lead-free solder composition and method for manufacturing thereof, Patent application number 10-2017-0130284", ~ (2017)
- J. P. Jung, "Lead-free solder composition and method for manufacturing thereof, Patent application number 10-2017-0063042", ~ (2017)
- A. Sharma, "Effect of graphene nanoplatelets on wetting, microstructure, and tensile characteristics of Sn-3.0Ag-0.5Cu (SAC) alloy", Metall. Mater. Trans A, 47A, pp.494~ (2016)
- S. Chellvarajoo, "Microstructure and mechanical properties of Pb-free Sn-3.0Ag-0.5Cu solder pastes added with NiO nanoparticles after reflow soldering process", Mater. Des., 90(15), pp.499~ (2016)[DOI]
- Y. Li, "Effect of <TEX>$TiO_{2}$<", TEX> addition concentration on the wettability and intermetallic compounds growth of <TEX>$Sn3.0Ag0.5Cu-xTiO_{2}$<, J. Mater. Sci. Mater. Electron., pp.2014, 25(9)[DOI]
- Q. J. Zhai, "Alloy Thermo-Mechanism: Theory and Application" (1999), Metallurgy Industry Press
- Y. Huang, "Sn-3.0Ag-0.5Cu nanocomposite solders reinforced by graphene nanosheets", J. Mater. Sci. Mater. Electron., 27(7), pp.6809~ (2016)[DOI]
- X. D. Lin, "Effect of graphene nanosheets reinforcement on the performance of Sn-Ag-Cu lead-free solder", Mater. Sci. Eng. A, 562(1), pp.25~ (2013)[DOI]
- A. Fawzy, "Effect of ZnO nanoparticles addition on thermal, microstructure and tensile properties of Sn-3.5Ag-0.5Cu (SAC355) solder alloy", J. Mater. Sci. Mater. Electron., 24(9), pp.3210~ (2013)[DOI]
- D. C. Lin, "An investigation of nanoparticles addition on solidification kinetics and microstructure development of tin-lead solder", Mater. Sci. Eng. A, 360(1), pp.285~ (2003)[DOI]
- L. C. Tsao, "Effects of <TEX>$nano-TiO_{2}$<", TEX> additions on thermal analysis, microstructure and tensile properties of Sn3.5Ag0.25Cu solder, 2010, pp.31(2), 990~
- Y. D. Han, "Development of a Sn-Ag-Cu solder reinforced with Ni-coated carbon nanotubes", J. Mater. Sci. Mater. Electron., 22(3), pp.315~ (2011)[DOI]
- L. C. Tsao, "Effects of <TEX>$nano-Al_{2}O_{3}$<", TEX> additions on microstructure development and hardness of Sn3.5Ag0.5Cu solder, 2010, pp.31(10), 4831~
- I. M. Lifshitz, "Kinetics of diffusive decomposition of supersaturated solid solutions", Soviet Phys. J. Exp. Theo. Phys., 35(8), pp.479~ (1959)
- Y. Shi, "Creep properties of composite solders reinforced with nano- and microsized particles", J. Electron. Mater, 37(4), pp.507~ (2008)[DOI]
- M. Z. Yahaya, "Hardness profiles of <TEX>$Sn-3.0Ag-0.5Cu-TiO_{2}$<", TEX> composite solder by nanoindentation, 2016, pp.699(4), 178~