Dedicated preparation for in situ transmission electron microscope tensile testing of exfoliated graphene
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Graphene, which is one of the most promising materials for its state-of-the-art applications, has received extensive attention because of its superior mechanical properties. However, there is little experimental evidence related to the mechanical properties of graphene at the atomic level because of the challenges associated with transferring atomically-thin two-dimensional (2D) materials onto microelectromechanical systems (MEMS) devices. In this study, we show successful dry transfer with a gel material of a stable, clean, and free-standing exfoliated graphene film onto a push-to-pull (PTP) device, which is a MEMS device used for uniaxial tensile testing in in situ transmission electron microscopy (TEM). Through the results of optical microscopy, Raman spectroscopy, and TEM, we demonstrate high quality exfoliated graphene on the PTP device. Finally, the stress–strain results corresponding to propagating cracks in folded graphene were simultaneously obtained during the tensile tests in TEM. The zigzag and armchair edges of graphene confirmed that the fracture occurred in association with the hexagonal lattice structure of graphene while the tensile testing. In the wake of the results, we envision the dedicated preparation and in situ TEM tensile experiments advance the understanding of the relationship between the mechanical properties and structural characteristics of 2D materials.
Abstract
Graphene, which is one of the most promising materials for its state-of-the-art applications, has received extensive attention because of its superior mechanical properties. However, there is little experimental evidence related to the mechanical properties of graphene at the atomic level because of the challenges associated with transferring atomically-thin two-dimensional (2D) materials onto microelectromechanical systems (MEMS) devices. In this study, we show successful dry transfer with a gel material of a stable, clean, and free-standing exfoliated graphene film onto a push-to-pull (PTP) device, which is a MEMS device used for uniaxial tensile testing in in situ transmission electron microscopy (TEM). Through the results of optical microscopy, Raman spectroscopy, and TEM, we demonstrate high quality exfoliated graphene on the PTP device. Finally, the stress–strain results corresponding to propagating cracks in folded graphene were simultaneously obtained during the tensile tests in TEM. The zigzag and armchair edges of graphene confirmed that the fracture occurred in association with the hexagonal lattice structure of graphene while the tensile testing. In the wake of the results, we envision the dedicated preparation and in situ TEM tensile experiments advance the understanding of the relationship between the mechanical properties and structural characteristics of 2D materials.
참고문헌 (43)
- J. Annett, , Nature, 535, pp.271~ (2016)
- R. Bala, , Eng. Sci. Technol. Int. J, 19, pp.531~ (2016)
- L. G. Cancado, , Nano Lett, 11, pp.3190~ (2011)
- C.H. Cao, , Proc. IEEE Micr. Elect., 381–384 (2015)
- C.H. Cao, , Nanotechnology, 27, pp.28LT01~ (2016)
- H. Chen, , Adv. Mater., 20, pp.3557~ (2008)
- L. Y. Chen, , Nat. Mater., 14, pp.707~ (2015)
- M. F. El-Kady, , Nat. Commun., 4, pp.1475~ (2013)
- C. Gammer, , Appl. Phys. Lett, 109, pp.081906~ (2016)
- A. K. Geim, , Nat. Mater., 6, pp.183~ (2007)
- F. Guinea, , Nat. Phys ., 6, pp.30~ (2010)
- J. Han, , Nanoscale, 7, pp.15672~ (2015)
- K. Kim, , Nano Lett., 12, pp.293~ (2012)
- K. Kim, , Phys. Rev. B, 83, pp.245433~ (2011)
- N. A. Kyeremateng, , Nat. Nano., 12, pp.7~ (2017)
- C. Lee, , Science, 321, pp.385~ (2008)
- G. H. Lee, , Science, 340, pp.1073~ (2013)
- N. Levy, , Science, 329, pp.544~ (2010)
- H. Li, , ACS Nano, 7, pp.10344~ (2013)
- Z. Liao, , Sci. Rep., 7, pp.211~ (2017)
- F. Liu, , Phys. Rev. B, 76, pp.064120~ (2007)
- Y. Y. Liu, , Phys. Rev. Lett, 105, pp.235502~ (2010)
- M. M. Lucchese, , Carbon, 48, pp.1592~ (2010)
- A. E. Mag-isa, , 2D Mater, 2, pp.034017~ (2015)
- J. C. Meyer, , Nat. Mater., 10, pp.209~ (2011)
- K. Min, , Appl. Phys. Lett, 98, pp.013113~ (2011)
- B. Mortazavi, , Nanotechnology, 25, pp.215704~ (2014)
- H. Y. Nan, , J. Raman Spectrosc, 44, pp.1018~ (2013)
- K. S. Novoselov, , Nature, 438, pp.197~ (2005)
- K. S. Novoselov, , Science, 306, pp.666~ (2004)
- Y. Oh, , Google patents, ~ (2014)
- Q. X. Pei, , Carbon, 48, pp.898~ (2010)
- F. Pizzocchero, , Nat. Commun., 7, pp.11894~ (2016)
- M.A. Rafiee, , ACS Nano, 3, pp.3884~ (2009)
- F. Scarpa, , Nanotechnology, 20, pp.065709~ (2009)
- C. Si, , Phys. Rev. Lett, 111, pp.196802~ (2013)
- J. W. Suk, , Phys. Status Solidi RRL, 9, pp.564~ (2015)
- P. Venezuela, , Phys. Rev. B, 84, pp.035433~ (2011)
- X. G. Wang, , Nano Lett, 15, pp.7886~ (2015)
- P. Zhang, , Nat. Commun, 5, pp.5167~ (2014)
- Y. B. Zhang, , Nature, 438, pp.201~ (2005)
- Y. Y. Zhang, , Carbon, 49, pp.4511~ (2011)
- X. Zhao, , Macromolecules, 43, pp.2357~ (2010)