TEM sample preparation of microsized LiMn2O4 powder using an ion slicer
2
조회
0
다운로드
0
인용
0
참고문헌
초록
The main purpose of this paper is the preparation of transmission electron microscopy (TEM) samples from the microsized powders of lithium-ion secondary batteries. To avoid artefacts during TEM sample preparation, the use of ion slicer milling for thinning and maintaining the intrinsic structure is described. Argon-ion milling techniques have been widely examined to make optimal specimens, thereby making TEM analysis more reliable. In the past few years, the correction of spherical aberration (Cs) in scanning transmission electron microscopy (STEM) has been developing rapidly, which results in direct observation at an atomic level resolution not only at a high acceleration voltage but also at a deaccelerated voltage. In particular, low-kV application has markedly increased, which requires a sufficiently transparent specimen without structural distortion during the sample preparation process. In this study, sample preparation for high-resolution STEM observation is accomplished, and investigations on the crystal integrity are carried out by Cs-corrected STEM.
Abstract
The main purpose of this paper is the preparation of transmission electron microscopy (TEM) samples from the microsized powders of lithium-ion secondary batteries. To avoid artefacts during TEM sample preparation, the use of ion slicer milling for thinning and maintaining the intrinsic structure is described. Argon-ion milling techniques have been widely examined to make optimal specimens, thereby making TEM analysis more reliable. In the past few years, the correction of spherical aberration (Cs) in scanning transmission electron microscopy (STEM) has been developing rapidly, which results in direct observation at an atomic level resolution not only at a high acceleration voltage but also at a deaccelerated voltage. In particular, low-kV application has markedly increased, which requires a sufficiently transparent specimen without structural distortion during the sample preparation process. In this study, sample preparation for high-resolution STEM observation is accomplished, and investigations on the crystal integrity are carried out by Cs-corrected STEM.
참고문헌 (14)
- B. Basnar, "Focused ion beam induced surface amorphization and sputter processes", J. Vac. Sci. Technol. B, 21, pp.927~930 (2003)
- S. D. Findlay, "Direct visualization of lithium via annular bright field scanning transmission electron microscopy: A review", Microscopy, 66, pp.3~14 (2016)
- R. Jiang, "Application of BIB polishing technology in cross-section preparation of porous, layered and powder materials: A review", Front. Mater. Sci., 13, pp.107~125 (2019)
- N. I. Kato, "Reducing focused ion beam damage to transmission electron microscopy samples", J. Electron Microsc, 53, pp.451~458 (2004)
- B. Key, "Realtime NMR investigations of structural changes in silicon electrodes for Lithium-ion batteries", J. Am. Chem. Soc, 131, pp.9239~9249 (2009)
- Y. Miao, "Current li-ion battery technologies in electric vehicles and opportunities for advancements", Energies, 12, pp.1074~ (2019)
- N. Nitta, "Li-ion battery materials: Present and future", Mater. Today, 18, pp.252~264 (2015)
- M. N. Obrovac, "Structural changes in silicon anodes during lithium insertion", extraction, 2004, pp.7, A93~
- J. P. Pender, "Electrode degradation in lithium-ion batteries", ACS Nano, 14, pp.1243~1295 (2020)
- S. J. Pennycook, "Z-contrast stem for materials science", Ultramicroscopy, 30, pp.58~69 (1989)
- P. Roediger, "Hochleitner, Bertagnolli, Focused-ionbeam- inflicted surface amorphization and gallium implantation—new insights and removal by focused-electro-beam-induced etching", Nanotechnology, 22, pp.235302~ (2011)
- T. Sasaki, "Performance of low-voltage STEM", TEM with delta corrector and cold field emission gun, 2010, pp.59, S7~S13
- G. Shao, "Polymer-derived SiOC integrated with a graphene aerogel as a highly stable Li-ion battery anode", ACS Appl. Mater. Interfaces, 12, pp.46045~46056 (2020)
- H. Yamada, "Ideal design of textured LiCoO2 sintered electrode for Li-ion secondary battery", APL Materials, 1, pp.042110~ (2013)