토글 가새-고집적 마찰댐퍼를 설치한 철근콘크리트모멘트 골조의 성능 평가
Seismic Behavior of Reinforced Concrete Moment Frames Retrofitted by Toggle Bracing System with High Density Friction Damper
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The friction damper can be used for improving the seismic resistance of existing buildings. The damper is often installed in bracingmembers. The energy dissipation capacity of the damping systems depends on the type of the structure, the configuration of the bracingmembers, and the property of dampers. In Korea, there are numerous low- to mid-rise reinforced concrete moment frames that wereconstructed considering only gravity loads. Those frames may be vulnerable for future earthquakes. To resolve the problem, this studydeveloped a toggle bracing system with a high density friction damper. To investigate the improvement of reinforced concrete frames afterretrofit using the developed damped system, experimental tests were conducted on frame specimens with and without the dampedsystem. The results showed that the maximum strength, initial stiffness and energy dissipation capacity of the framed with the dampedsystem were much larger than those of the frame without the damped system.
Abstract
The friction damper can be used for improving the seismic resistance of existing buildings. The damper is often installed in bracingmembers. The energy dissipation capacity of the damping systems depends on the type of the structure, the configuration of the bracingmembers, and the property of dampers. In Korea, there are numerous low- to mid-rise reinforced concrete moment frames that wereconstructed considering only gravity loads. Those frames may be vulnerable for future earthquakes. To resolve the problem, this studydeveloped a toggle bracing system with a high density friction damper. To investigate the improvement of reinforced concrete frames afterretrofit using the developed damped system, experimental tests were conducted on frame specimens with and without the dampedsystem. The results showed that the maximum strength, initial stiffness and energy dissipation capacity of the framed with the dampedsystem were much larger than those of the frame without the damped system.
참고문헌 (14)
- Pall AS, "Response of friction damped braced frames", J. Struct. Div. ASCE, 108(ST6), pp.1313~1323 (1982)
- Mualla IH, "Performance of steel frames with a new friction damper device under earthquake excitation", Engineering Structures. Elsevier, 24(3), pp.365~371 (2002)
- Wu B, "Hysteretic behavior of improved Pall-typed frictional dampers. Engineering Structures", Engineering Structures, 27(8), pp.1258~1267 (2005), Elsevier
- Monir HS, "Modified friction damper for diagonal bracing of structures", Journal of Constructional Steel Research, 87, pp.17~30 (2013), Elsevier
- 노지은, "건축구조물의 내진보강을 위한 회전형 마찰감쇠기의 성능실험", 대한건축학회논문집 구조계, 27(12), pp.11~20 (2011), 대한건축학회
- Constantinou MC, "Toggle-Brace-Damper Seismic Energy Dissipation Systems", Journal of Structural Engineering, 127(2), pp.105~112 (2001), ASCE
- Hwang JS, "Analytical and experimental study of toggle-brace-damper systems", Journal of Structural Engineering, 131(7), pp.1035~1043 (2005), ASCE
- 박진영, "회전 마찰형 제진장치의 이력특성에 대한 실험적 연구", 한국지진공학회논문집, 17(5), pp.227~235 (2013), 한국지진공학회
- Experimental characterization of boltstressed non asbestos organic(NAO) material-to-steel interfaces, "Kim HJ", Dept. of Civil Engineering, Univ. of Toronto, 6~30 (2004)
- Jeon KJ, "An improvement of priority-screening method for seismic capacity evaluation and safety of R", C school buildings in Korea, Chonnam National University, 2011
- 문기훈, "조적조 비내력벽을 가진 기존 학교 구조물의 내진 성능 평가", 한국지진공학회논문집, 16(6), pp.37~46 (2012), 한국지진공학회
- Standard design documents of school building, "Ministry of Education", National Archives of Korea, ~, pp.Announcement of Ministry of Construction No. 130 (1980)
- 이상호, "고베지진으로 피해를 입은 RC 학교건축물을 이용한 효율적인 내진성능 평가방법의 제안", 대한건축학회논문집 구조계, 22(4), pp.83~93 (2006), 대한건축학회
- Building Code Requirements for Structural Concrete (ACI 318M-11) and Commentary, "ACI Committee", American Concrete Institute, ~ (2011)