좌굴방지링으로 횡지지된 건식형 좌굴방지가새 내진보강에 대한 실험적 연구
An Experimental Study on Seismic Reinforcement of Dry Type Buckling Restrained Braces Laterally Using Buckling Restrained Rings
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study is conducted to verify the seismic reinforcement effects of internally inserted buckling-restrained braces supported laterally by buckling-restrained rings for the seismic reinforcement of existing reinforced concrete buildings with non-seismic details. First, to evaluate the performance of KDS, the hysteretic characteristics of buckling-restrained braces are verified, and it is discovered that they satisfy the conformance criteria of the displacement-dependent damping device. Three full-scale, two-story reinforced concrete framework specimens are prepared to verify the seismic reinforcement effects, and the proposed buckling-restrained braces are bolstered with single diagonal and V-shaped braces to be compared with non-reinforced specimens. By performing a comparison with non-reinforced specimens that present intensive shear cracks at the bottom of first-floor columns, it is revealed that the maximum load and energy dissipation of specimens reinforced with the proposed buckling restrained braces, in which the structural damage extends evenly throughout the system, are approximately 4 and 6.2 times higher, respectively, which proves the effectiveness of the proposed seismic reinforcement method.
Abstract
This study is conducted to verify the seismic reinforcement effects of internally inserted buckling-restrained braces supported laterally by buckling-restrained rings for the seismic reinforcement of existing reinforced concrete buildings with non-seismic details. First, to evaluate the performance of KDS, the hysteretic characteristics of buckling-restrained braces are verified, and it is discovered that they satisfy the conformance criteria of the displacement-dependent damping device. Three full-scale, two-story reinforced concrete framework specimens are prepared to verify the seismic reinforcement effects, and the proposed buckling-restrained braces are bolstered with single diagonal and V-shaped braces to be compared with non-reinforced specimens. By performing a comparison with non-reinforced specimens that present intensive shear cracks at the bottom of first-floor columns, it is revealed that the maximum load and energy dissipation of specimens reinforced with the proposed buckling restrained braces, in which the structural damage extends evenly throughout the system, are approximately 4 and 6.2 times higher, respectively, which proves the effectiveness of the proposed seismic reinforcement method.
참고문헌 (15)
- Korea Meteorological Administration, "Weather Information", ~
- Site inspection and damage investigation of buildings by earthquakes in Gyeongju and Pohang, "Architectural Institute of Korea", ~ (2018)
- Ministry of Land, Infrastructure and Transport, "Seismic design code for buildings (KDS 41 17 00)", ~ (2019)
- "Status of securing seismic performance of existing public facilities in 2020"[URL]
- MOE, "Seismic performance evaluation and retrofit manual for school facilities", Ministry of Education, ~ (2021)
- Yoshino T, "Experimental study on shear wall with braces :Part 2", Summaries of technical papers of annual meeting, 11, pp.403~404 (1971), Architectural Institute of Japan
- Watanabe A, "Development of Unbonded Brace" (1998), Nippon Steel Corporation Building Construction and Urban Development Division
- 박병태, "비좌굴 모서리 가새형 프레임 시스템의 내진보강에 대한 실험연구", 한국강구조학회 논문집, 33(3), pp.191~201 (2021), 한국강구조학회[DOI]
- Toru T, "Review of Buckling-Restrained Brace Design and Application to Tall Buildings", International Journal of High-Rise Buildings, 7(3), pp.187~198 (2018)
- Tsai KC, "Welded end-slot connection and debonding layers for buckling-restrained braces", Earthquake Engineering & Structural Dynamics, 43, pp.1785~1807 (2014)
- Wu AC, "High-mode buckling responses of bucklingrestrained brace core plates", Earthquake Engineering & Structural Dynamics, 43, pp.375~393 (2014)
- Ministry of Land, Infrastructure and Transport, "Steel structure design code (KDS 14 31 60)", ~ (2017)
- The Japan Building Disaster Prevention Association, "Guidelines for seismic retrofit of existing reinforced concrete buildings", ~ (2001)
- Japan Building Disaster Prevention Association, "Guideline for seismic retrofit of existing reinforced concrete building", ~ (2017)
- Korea Authority of Land & Infrastructure Safety, "Guidelines for seismic performance evaluation of existing facilities (Buildings)", ~ (2021)