극저온 상태에서 AC4C-T6의 가공 경화 모델 결정에 관한 연구
Cyclic Stress-strain Hardening Model of AC4C-T6 Alloy at Cryogenic Temperature
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Present study is concerned with the simulation of plasticity models forthe cyclic stress-strain behavior of aluminum alloy AC4C-T6 that can be used for primary materials of LNG cargo pump. Material model of cyclic hardening and plasticity for aluminum alloy AC4C-T6 was investigated through experiments and numerical simulations. Monotonic tensile and cyclic tension-compression test under symmetric load cycles was performed at both room temperature and cryogenic temperature of -165oC. Based on the experimental data plastic hardening models were evaluated for isotropic/kinematic/combined hardening. FEA (Finite Element Analysis) models which describe the cyclic stress-strain relationship were evaluated for the simulation of plasticity. An appropriate hardening model is proposed comparing the results of FEA with those of experiments.
Abstract
Present study is concerned with the simulation of plasticity models forthe cyclic stress-strain behavior of aluminum alloy AC4C-T6 that can be used for primary materials of LNG cargo pump. Material model of cyclic hardening and plasticity for aluminum alloy AC4C-T6 was investigated through experiments and numerical simulations. Monotonic tensile and cyclic tension-compression test under symmetric load cycles was performed at both room temperature and cryogenic temperature of -165oC. Based on the experimental data plastic hardening models were evaluated for isotropic/kinematic/combined hardening. FEA (Finite Element Analysis) models which describe the cyclic stress-strain relationship were evaluated for the simulation of plasticity. An appropriate hardening model is proposed comparing the results of FEA with those of experiments.
참고문헌 (26)
- ANSYS, "Theory Reference - Structures with Material Nonlinearities" (2006), ANSYS Inc. ltd.
- ASTM, "ASTM E8M-00 Standard Test Methods for Tension Testing of Metallic Materials, In: Annual Book of ASTM standards" (1999), American Society for Testing and Materials
- ASTM, "ASTM E1450-03 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium" (2002), American Society for Testing and Materials
- ASTM, "ASTM 606-04 Standard Practice for Strain-Controlled Fatigue Testing, In: Annual Book of ASTM Standards, Philadelphia" (2003), American Society for Testing and Materials
- Avanzini A., "Mechanical Characterization and Finite Element Modeling of Cyclic Stress-strain Behavior of Ultra High Molecular Weight Polyethylene", Materials & Design, 29, pp.330~343 (2008)
- Bari S., "Constitutive Modeling for Cyclic Plasticity and Ratcheting", 박사, pp.2001
- Bari S., "Anatomy of Coupled Constitutive Models for Ratcheting Simulation", International Journal of Plasticity, 16(3-4), pp.381~409 (2000)
- Brunet M., "Nonlinear Kinematic Hardening Identification for Anisotropic Sheet Metals With Bending-Unbending Tests", Journal of Engineering Materials and Technology, 123, pp.378~383 (2001)
- Chung K., "Spring- Back Evaluation of Automotive Sheets Based on Isotropic-kinematic Hardening Laws and Non-quadratic Anisotropic Yield Functions: Part I: Theory and Formulation", International Journal of Plasticity, 21(5), pp.861~882 (2005)
- Hong S.H., "Development of Diagnosis System for LNG Pump", Journal of the Korean Institute of Gas, 21(3), pp.88~95 (1998)
- 현홍철, "금속재료 응력-변형률 곡선의 수학적 표현들", 대한기계학회논문집 A, 32(1), pp.21~28 (2008), 대한기계학회
- "Chaboche Nonlinear Kinematic Hardening Model"[URL]
- Ishihara S., "Analysis of Short Fatigue Crack Growth in Cast Aluminum Alloys", International Journal of Fatigue, 24, pp.1169~1174 (2002)
- Kang G., "Finite Element Implementation of Visco-plastic Constitutive Model with Strain-range-dependent Cyclic Hardening", Communications in Numerical Methods in Engineering, 22(2), pp.137~153 (2005)
- 김경수, "ESPI System을 이용하여 측정한 국부 변형률이 저사이클 피로수명에 미치는 영향에 관한 연구", 대한조선학회 논문집, 43(2), pp.213~219 (2006), 대한조선학회
- Kulkarni S.C., "Uniaxial and Biaxial Ratchetting in Piping Materials-experiments and Analysis", International Journal of Pressure Vessels and Piping, 81(7), pp.609~617 (2004)
- Lang H., "Cyclic Plastic Deformation Tests to Verify FEM-based Shakedown Analyses, Nuclear Engineering and Design", 206(2-3), pp.235~247 (2001)
- Lee H.Y., "Test and Analysis of Thermal Ratcheting Deformation for 316L Stainless Steel Cylindrical Structure", Journal of The Korean Society of Mechanical Engineers, A(26), pp.479~486 (2002)
- Lee K.M., "A Development of LNG Pump Tower Analysis System", Special Issue of the Society of Naval Architect of Korea, pp.7~13 (2007)
- Lemaitre L., "Mechanics of Solid Materials" (1990), Cambridge University Press
- "Calibration Methods for The Lemaitre Chaboche Plasticity Model"[URL]
- Noh B.J., "Sloshing Load Analysis in Spherical tank of LNG Carrier", Special Issue of the Society of Naval Architect of Korea, pp.22~30 (2005)
- Nho I.S., "Structural Safety Assessment of Independent Spherical LNG Tank (1st Report) - Fatigue Strength Analysis Based on the S-N Approach", Transactions of the Society of Naval Architects of Korea, 30(2), pp.132~140 (1993)
- Rahman S.M., "Evaluation of Cyclic Plasticity Models in Ratcheting Simulation of Straight Pipes under Cyclic Bending and Steady Internal Pressure", International Journal of Plasticity, 24, pp.1756~1791 (2008)
- Shiozawa K., "Crack Initiation and Small fatigue Crack Growth Behaviour of Squeeze-Cast Al-Si Aluminum Alloys", Fatigue & Fracture of Engineering Materials & Structures, 20(2), pp.237~247 (1997)
- Smith D.J., "Simulating the Cyclic Mechanical Response of Titanium Alloy 834 at 630°C, Material at High Temperatures", 18(32), pp.153~162 (2001)