6000계열 알루미늄 합금의 극저온 기계적 거동 연구
Study on Cryogenic Mechanical Behavior of 6000 Series Aluminum Alloys
1
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
In this study, tensile tests were performed on aluminum alloys (AA6061 and AA6082) to investigate their mechanical behaviors atcryogenic temperatures. The temperature was varied from 110 K up to 293 K, and quasi-static strain rates of 10-4 s-1–10-2 s-1 were taken intoaccount for the tests. The experimental results were analyzed to find the dependence on the temperature, strain rate, and fractured surfaces. As aresult, it was found that the strength and elongation of the aluminum alloys were improved when the temperature was decreased. In addition, itwas confirmed that the mechanical behaviors of the aluminum alloys were not dependant on the strain rate. Under a tensile load, two types offractures were seen in the aluminum alloys: cup-cone (AA6061) and shear (AA6082).
Abstract
In this study, tensile tests were performed on aluminum alloys (AA6061 and AA6082) to investigate their mechanical behaviors atcryogenic temperatures. The temperature was varied from 110 K up to 293 K, and quasi-static strain rates of 10-4 s-1–10-2 s-1 were taken intoaccount for the tests. The experimental results were analyzed to find the dependence on the temperature, strain rate, and fractured surfaces. As aresult, it was found that the strength and elongation of the aluminum alloys were improved when the temperature was decreased. In addition, itwas confirmed that the mechanical behaviors of the aluminum alloys were not dependant on the strain rate. Under a tensile load, two types offractures were seen in the aluminum alloys: cup-cone (AA6061) and shear (AA6082).
참고문헌 (17)
- Aval, H. J., "Evolution of Microstructures and Mechanical Properties in Similar and Dissimilar Friction Stir Welding of AA5086 and AA6061", Materials Science and Engineering A, 528(28), pp.8071~8083 (2011)
- Callister, W. D., "Materials Science and Engineering and Introduction. 7th Edition" (2006), John Wiley & Sons
- Darras, B. M., "Analysis of Damage in 5083 Aluminum Alloy Deformed at Different Strain Rates", Materials Science and Engineering A, 568, pp.143~149 (2013)
- Fan, X., "Dynamic Mechanical Behavior of 6061 al Alloy at Elevated Temperatures and Different Strain Rates", Acta Materialia, 26(2), pp.111~120 (2013)
- Gere, J. M., "Mechanics of Materials. 7th Edition" (2009), Cengage Learning
- 김경수, "SUS304L 겹침 용접부에 대한 극저온에서의 인장 및 피로강도에 관한 실험적 연구", 한국해양공학회지, 22(3), pp.96~102 (2008), 한국해양공학회
- Kim, J. H., "Effect of Pre-straining on Low-temperature Mechanical Behavior of AISI 304L", Materials Science and Engineering A, 543, pp.50~57 (2012)
- Kim, J. K., "Fatigue Crack Growth Behavior of Membrane Material for LNG Storage Tank at Low Temperatures", Journal of Ocean Engineering and Technology, 14(1), pp.23~28 (2000)
- 이경준, "극저온 재료 성능분석을 위한 온도의존 손상모델 개발", 대한조선학회 논문집, 45(5), pp.538~546 (2008), 대한조선학회
- 이경윤, "인장시험과 유한요소해석으로 구한 파단 진변형률을 이용한 진응력-진변형률 선도 획득", 대한기계학회논문집 A, 33(10), pp.1054~1064 (2009), 대한기계학회
- Mahabunphachai, S., "Investigations on Forming of Aluminum 5052 and 6061 Sheet Alloys at Warm Temperatures", Materials & Design, 31(5), pp.2422~2434 (2010)
- Moreira, P. M. G. P., "Mechanical and Metallurgical Characterization of Friction Stir Welding Joints of AA6061-T6 with AA6082-T6", Materials & Design, 30(1), pp.180~187 (2009)
- Nam, K. W., "Life Prediction of Fatigue Crack Propagation and Nondestructive Evaluation in 5083 Aluminum Alloy", Journal of Ocean Engineering and Technology, 15(2), pp.94~98 (2001)
- 남기우, "시간-주파수 해석법에 의한 5083 알루미늄의 피로균열 진전에 의한 음향방출 신호의 주파수특성", 한국해양공학회지, 17(3), pp.46~51 (2003), 한국해양공학회
- Park, W. S., "Comparative Study on Mechanical Behavior of Low Temperature Application Materials for Ships and Offshore Structures : Part I-Experimental Investigations", Materials Science and Engineering A, 528(18), pp.5790~5803 (2011)
- Picu, R. C., "Strain Rate Sensitivity of the Commercial Aluminum Alloy AA5182-O", Materials Science and Engineering A, 390(1-2), pp.334~343 (2005)
- Ugural, A. C., "Advanced Strength and Applied Elasticity. 4th Edition" (2003), Prentice Hall