극저온용 스테인레스 강의 저온거동 특성
Mechanical Characteristics of Stainless Steel under Low Temperature Environment
1
조회
0
다운로드
12
인용
0
참고문헌
키워드
초록
Austenitic stainless steels(SUS 304, SUS 316), which are used for safety control valve of LNG carrier, are occasionally exposed in the cryogenic environment. In this regards, it is required to evaluate the mechanical characteristics under the low temperature environment. In this study, a series of uniaxial tensile test was carried out varying temperature for austenitic stainless steel. The phenomena of the strain-induced plasticity have been observed on the all temperature ranges. The critical value for threshold of 2nd hardening due to the phase transformation induced plasticity as well as the increase of hardening have been reported. The summarized experimental results would be used for the validation of numerical techniques applicable for the nonlinear hardening behavior of austenitic stainless steel under the cryogenic temperature environment.
Abstract
Austenitic stainless steels(SUS 304, SUS 316), which are used for safety control valve of LNG carrier, are occasionally exposed in the cryogenic environment. In this regards, it is required to evaluate the mechanical characteristics under the low temperature environment. In this study, a series of uniaxial tensile test was carried out varying temperature for austenitic stainless steel. The phenomena of the strain-induced plasticity have been observed on the all temperature ranges. The critical value for threshold of 2nd hardening due to the phase transformation induced plasticity as well as the increase of hardening have been reported. The summarized experimental results would be used for the validation of numerical techniques applicable for the nonlinear hardening behavior of austenitic stainless steel under the cryogenic temperature environment.
참고문헌 (9)
- Cedric Garion, "Constitutive Modelling and Identification of Parameters of the Plastic Strain-induced Martensitic Transformation in 316 Lstainless Steel at Cryogenic Temperatures", International Journal of Plasticity, 22, pp.1234~1264 (2006)
- Cho, C.C, "The Effect of Nitrogen on the Low Temperature Mechanical Properties of Ni-free Austenitic Stainless Steel", Journal of the Korean Institute of Metals, 20(10), pp.927~935 (1982)
- Kim, J.K, "Low Temperature Effects on the Strength and Fracture Toughness of Membrane Material for LNG Storage Tank", Journal of Mechanical Science and Technology A, 24(3), pp.710~717 (2000)
- Nam, Y.Y, "Structural Safety Assessment of Independent Spherical LNG Tank (3rd report)", Transactions of the Society of Naval Architects of Korea, 30(4), pp.83~92 (1993)
- 이제명, "멤브레인 LNG선 방열시스템동적 강도 실험적 특성평가", 대한조선학회 논문집, 44(3), pp.296~304 (2007), 대한조선학회
- Lee, H.W, "A Study on Low Temperature Strength and Fatigue Strength of Austenitic Stainless Steel for Membrane Type LNG Tank", Journal of KWS, 17(3), pp.198~202 (1999)
- Lee, H.M, "Construction of Cryogenic Testing System and Tensile Deformation Behavior of AISI 300 Series S tainless Steels at Cryogenic Temperatures", Journal of the Korean Inst. of Metals, 28(11), pp.970~976 (1990)
- Noh, B.J, "Sloshing Load Analysis in Spherical Tank of LNG Carrier", Special Issue of the Society of Naval Architect of Korea, pp.22~30 (2005)
- Tobler, R.L, "Design-relevant Mechanical Properties of 316-type Steels for Superconducting Magnets", Cryogenics, 37, pp.533~550 (1997)