기하학적 변위 이론을 적용한 VLCC 최종종강도 평가
Assessment of Ultimate Longitudinal Strength of a VLCC considering Kinematic Displacement Theory
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This paper presents prediction of ultimate longitudinal strength of a VLCC, “Energy Concentration” for which many benchmark studies have been carried out, based on kinematic displacement method proposed by Tayyar and Bayraktarkatal (2012). Kinematic displacement theory provides semi-analytical solution of average compressive strengths for various kinds of stiffened panels. The accuracy of average compressive strengths obtained from formulas of CSR(common structural rules) for tankers and kinematic displacement method are discussed in the fore part of this paper. Hull girder ultimate strengths using Smith method are also compared for different average compressive strengths. By comparing them with other benchmark results, it is concluded that the new method provides lower bounds,because hull girder strengths under the sagging and hogging moment conditions approach nearly lower bounds.
Abstract
This paper presents prediction of ultimate longitudinal strength of a VLCC, “Energy Concentration” for which many benchmark studies have been carried out, based on kinematic displacement method proposed by Tayyar and Bayraktarkatal (2012). Kinematic displacement theory provides semi-analytical solution of average compressive strengths for various kinds of stiffened panels. The accuracy of average compressive strengths obtained from formulas of CSR(common structural rules) for tankers and kinematic displacement method are discussed in the fore part of this paper. Hull girder ultimate strengths using Smith method are also compared for different average compressive strengths. By comparing them with other benchmark results, it is concluded that the new method provides lower bounds,because hull girder strengths under the sagging and hogging moment conditions approach nearly lower bounds.
참고문헌 (16)
- Cho, S.R., "Post-ultimate behaviour of stiffened panels subjected to axial compression", 2nd International Conference on Thin-Walled Structures, pp.433~440 (1998)
- Choung, J., "Assessment of residual ultimate strength of an asymmetrically damaged tanker considering rotational and translational shifts of neutral axis plane", MARINE STRUCTURES, 25(1), pp.71~84 (2012), ELSEVIER SCI LTD
- 정준모, "비대칭 손상 선박의 잔류 종강도 평가를 위한 간이 해석 알고리즘 개발", 대한조선학회 논문집, 48(3), pp.281~287 (2011), 대한조선학회
- Gordo, J.M., "Approximate Method to Evaluate the Hull Girder Collapse Strength", Marine Structures, 9(1), pp.449~470 (1996)
- Gordo, J.M., "Interaction Equation for the Collapse of Tankers and Container Ships under Combined Bending Moments", Journal of Ship Research, 41(3), pp.230~240 (1997)
- Gordo, J.M., "Approximate Assessment of the Ultimate Longitudinal Strength of the Hull Girder", Journal of Ship Research, 4(1), pp.60~69 (1996)
- "Common structural rules for bulk carriers"[URL]
- "Common structural rules for double hull oil tankers"[URL]
- Khan, I.A., "Ultimate strength and reliability analysis of a VLCC", 3rd International ASRANet Colloquium, pp.1~14 (2006)
- Paik, J.K., "Ultimate Strength Formulations for Stiffened Panels under Combined Axial Load, In-Plane Bending and Lateral Pressure: a Benchmark Study", Thin-Walled Structures, 40(1), pp.45~83 (2002)
- Paik, J.K., "Ultimate Limit State Design of Steel-Plated Structures" (2002), Wiley
- Rutherford, S.E., "Ultimate Longitudinal Stregnth of Ships : A Case Study", International Journal of Ocean System Engineering, 2(3), pp.193~197 (1990)
- Smith, C.S., "Influence of local compression failure on ultimate longitudinal strength of a ship hull", Proceeding of International Symposium on Practical Design in Shipbuilding (PRADS), pp.73~79 (1977)
- Sun, H., "Buckling and Ultimate Strength Assessment of FPSO Structure", Transactions-SNAME, 113, pp.634~660 (2005)
- TAYYAR, G.T., "New Analytical Method with Curvature Based Kinematic Deflection Curve Theory", International Journal of Ocean System Engineering, 2(3), pp.193~197 (2012)
- Yao, T., "Progressive Collapse Analysis of a Ships Hull Girder under Longitudinal Bending considering Local Pressure Loads", Society of Naval Architectures of Japan, 188, pp.507~515 (2000)