컨테이너선의 최종 종강도 평가를 위한 비선형 유한요소 해석의 적용
Nonlinear Finite Element Analysis for Ultimate Hull Girder Strength of Container Ship
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Through the recent accident, the checking of ultimate hull girder capacity for container ship should be needed. Smith's method is well known as the only simplified method to access rapidly for ultimate hull girder capacity except very expensive nonlinear F.E approach. This simplified method, however, is admitted to apply only to bulker and tanker in accordance with Classification Rules up to now. The targets of this study are to verify effectiveness of the simplified method for container ship's ultimate hull girder strength and to propose the safety factor considering the local bending in double bottom structures due to out of plane loads through the nonlinear F.E analyses. Two different sized ships and three loading conditions which are pure bending, homo-loading and one-bay empty condition were used for this study. Based on the F.E results, the present study showed that CSR's simplified method is available for the ultimate hull girder strength of container ship and over 1.2 of safety factor should be applied to consider the local bending effect in double bottom structures due to out of plane loads such as sea pressure an cargo.
Abstract
Through the recent accident, the checking of ultimate hull girder capacity for container ship should be needed. Smith's method is well known as the only simplified method to access rapidly for ultimate hull girder capacity except very expensive nonlinear F.E approach. This simplified method, however, is admitted to apply only to bulker and tanker in accordance with Classification Rules up to now. The targets of this study are to verify effectiveness of the simplified method for container ship's ultimate hull girder strength and to propose the safety factor considering the local bending in double bottom structures due to out of plane loads through the nonlinear F.E analyses. Two different sized ships and three loading conditions which are pure bending, homo-loading and one-bay empty condition were used for this study. Based on the F.E results, the present study showed that CSR's simplified method is available for the ultimate hull girder strength of container ship and over 1.2 of safety factor should be applied to consider the local bending effect in double bottom structures due to out of plane loads such as sea pressure an cargo.
참고문헌 (12)
- Cho, S.R., "Comparative Study on Ultimate Longitudinal Strength of Various Type of Merchant ship", Proceedings of the Annual Autumn Meeting The Society of Naval Architects of Korea, pp.338~344 (2004)
- 정준모, "기하학적 변위 이론을 적용한 VLCC 최종종강도 평가", 대한조선학회 논문집, 50(4), pp.255~261 (2013), 대한조선학회
- Darie, I., "Ultimate strength of a cape size bulk carrier under combined global and local loads", Proceedings of the PRADS, pp.1173~1180 (2013), CECO
- European Standards, EN-10025, "Structural Steels. Part 2, 3, 4 and 6", European Standards, ~ (2004)
- European Standards, EN-10225, "Weldable Structural Steels for Fixed Offshore Structures -Technical Delivery Conditions", European Standards, ~ (2012)
- Gannon, L., "Effect of Welding-Induced Residual Stress and Distortion on Ship Hull Girder Ultimate Strength", Marine Structures, 28(1), pp.25~49 (2012)
- IACS, "Requirements concerning Strength of Ship, Longitudinal strength standard UR S11 – Rev. 7", IACS, ~ (2010)
- IACS, "Recommendation No. 47, Shipbuilding and Repair Quality Standard – Rev. 7", IACS, ~ (2013)
- IACS, "Common Structural Rules for Bulk Carriers and Oil Tankers Rev. 1", IACS, ~ (2014)
- "LS-DYNA Users’s Manual", LSTC, ~
- Report on the investigation of the structural failure of MSC Napoli, "Marine Accident Investigation Branch (MAIB)", MAIB, ~, pp.Report No 9 (2008)
- Investigation Report on Structural Safety of Large Container Ship, "Nippon Kaiji Kyokai(NK)", NK, ~ (2014)