랜덤 감쇠기법을 이용한 분할모형의 접수 감쇠계수 추정
Wet Damping Estimation of the Segmented Hull Model using the Random Decrement Technique
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This paper presents the wet damping estimation of the segmented hull model using the random decrement technique together with the continuous wavelet transform. The tested 16 sea states are grouped together based on the speed of the ship in order to figure out the possible influence of the ship speed on the damping ratio. The measured time histories of vertical bending moment for each tested sea state were processed with random decrement technique to derive the free decay signal, from which the damping ratios are estimated. Also, the autocorrelation functions of the filtered signal were calculated and comparison was made with the free decay signal obtained from the random decrement technique. Then the wet damping ratios for each sea state group, as well as precise wet natural frequencies, are estimated by using continuous wavelet transform. It turned out that the wet natural frequencies derived from the measured signal did not show any significant discrepancy compared with those obtained by wet hammering test, whereas the damping ratio did. It was considered that the discrepancy of the damping ratio between in calm and moving water may be attributed to the viscous effects caused by dramatically different flow pattern and relative velocity between the vibrating structure and surrounding fluid particles.
Abstract
This paper presents the wet damping estimation of the segmented hull model using the random decrement technique together with the continuous wavelet transform. The tested 16 sea states are grouped together based on the speed of the ship in order to figure out the possible influence of the ship speed on the damping ratio. The measured time histories of vertical bending moment for each tested sea state were processed with random decrement technique to derive the free decay signal, from which the damping ratios are estimated. Also, the autocorrelation functions of the filtered signal were calculated and comparison was made with the free decay signal obtained from the random decrement technique. Then the wet damping ratios for each sea state group, as well as precise wet natural frequencies, are estimated by using continuous wavelet transform. It turned out that the wet natural frequencies derived from the measured signal did not show any significant discrepancy compared with those obtained by wet hammering test, whereas the damping ratio did. It was considered that the discrepancy of the damping ratio between in calm and moving water may be attributed to the viscous effects caused by dramatically different flow pattern and relative velocity between the vibrating structure and surrounding fluid particles.
참고문헌 (13)
- On-The-Line Analysis of Random Vibrations, "Cole, H.A.", 68~288, pp.AIAA Paper No. 68-288 (1968)
- Cole, H.A., "Method and Apparatus for Measuring the Damping Characteristics of a Structure", United States. Pat. 3, 620,069, 069~ (1971)
- Elshafey, A.A., "Dynamic Response of Offshore Jacket Structures under Random Loads", Marine Structures, 22(3), pp.504~521 (2009)
- Haddara, M.R., "An Investigation of Roll Characteristics of Two Full Scale Ships at Sea", Ocean Engineering, 29(6), pp.651~666 (2002)
- Ibrahim, S.R., "A Method for the Direct Identification of Vibration Parameter from the Free Response", Shock and Vibration Bulletin, 47(4), pp.183~198 (1977)
- Lardies, J., "Identification of Modal Parameters using the Wavelet Transform", International Journal of Mechanical Sciences, 44(11), pp.2263~2283 (2002)
- 이대성, "고유진동형의 웨이블렛 변환에 의한 선체 거더의 균열 진단에 관한 연구", 대한조선학회 논문집, 39(2), pp.3~27 (2002), 대한조선학회
- Ruzzene, M., "Natural Frequencies and Damping Identification Using Wavelet Transform : Application to Real Data", Mechanical Systems and Signal Processing, 11(2), pp.207~218 (1997)
- Staszewski, W.J., "Identification of Damping in MDOF Systems Using Time-Sale Decomposition", Journal of Sound and Vibration, 203(2), pp.283~305 (1997)
- Staszewski, W.J., "Flutter data analysis using the wavelet transform", Proceedings of the MV2 International Congress on New Advances in Modal Synthesis of Large Structure : Nonlinear Damped and Non-Deterministic Cases, pp.549~561 (1995)
- Staszewski, W.J., "Wavelet Approach to Flutter Data Analysis", AIAA Journal of Aircraft, 39(1), pp.125~132 (1997)
- Vandiver, J.K., "A Mathematical Bases for the Random Decrement Vibration Signature Analysis Technique", Journal of Mechanical Design, 104(2), pp.307~313 (1982)
- Zubaydi, A., "On the Use of the Autocorrelation Function to Identify the Damage in the Side Shell of a Ship’s Hull", Marine Structures, 13(6), pp.537~551 (2000)