몸체 형상이 수중운동체의 공동 발달과 항력특성에 미치는 영향에 대한 수치적 연구
A Numerical Study of Effects of Body Shape on Cavity and Drag of Underwater Vehicle
1
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
The calculation of steady-state cavitating flows around Supercavitating Underwater Bodies (SUB's), which consist of a circular disk head (cavitator), a conical fore-body, a cylindrical middle-body and either a boat-tail or a flare-tail, are carried out. To calculate the axisymmetric cavitating flow, used is a commercial computational fluid dynamics code based on the finite volume method, Fluent. From the analysis of numerical results, the cavity and drag, affected by the fore-body and tail of the SUB’s, are investigated. Firstly, the effect of the fore-body shape is investigated with the same disk cavitator and a cylindrical rear-body of fixed diameter. Then with the same cavitator and a fixed fore-body, the effect of the rear-body shape is investigated. Before the cavity generated by the cavitator covers the slant of fore-bodies sufficiently, the larger the cone angle of the fore-body(i.e., the shorter the slant length), the larger the drag and the slower the development of cavity. After the cavity covers the fore-body completely so that the pressure drag component of the body is vanished, the characteristics of drag-velocity curves are identical. Also, as the tail angle is bigger, the cavity generated by the cavitator is suppressed further and the drag becomes larger. The peak of the drag appears for the flare-tail, i.e., when the tail angle is positive(+). On the contrary, the trough of the drag appears for the boat-tail, i.e., when the tail angle is negative(-). When the tail angle is 5 degrees, the peak of the drag appears at the body speed of 80m/s and the value of the drag is 43% larger than that at the design speed of 100m/s. When the tail angle is –5 degrees, the trough of the total drag appears at 75m/s and that drag is 30% smaller than that of the cavitator, which means the rest of the body has a negative drag.
Abstract
The calculation of steady-state cavitating flows around Supercavitating Underwater Bodies (SUB's), which consist of a circular disk head (cavitator), a conical fore-body, a cylindrical middle-body and either a boat-tail or a flare-tail, are carried out. To calculate the axisymmetric cavitating flow, used is a commercial computational fluid dynamics code based on the finite volume method, Fluent. From the analysis of numerical results, the cavity and drag, affected by the fore-body and tail of the SUB’s, are investigated. Firstly, the effect of the fore-body shape is investigated with the same disk cavitator and a cylindrical rear-body of fixed diameter. Then with the same cavitator and a fixed fore-body, the effect of the rear-body shape is investigated. Before the cavity generated by the cavitator covers the slant of fore-bodies sufficiently, the larger the cone angle of the fore-body(i.e., the shorter the slant length), the larger the drag and the slower the development of cavity. After the cavity covers the fore-body completely so that the pressure drag component of the body is vanished, the characteristics of drag-velocity curves are identical. Also, as the tail angle is bigger, the cavity generated by the cavitator is suppressed further and the drag becomes larger. The peak of the drag appears for the flare-tail, i.e., when the tail angle is positive(+). On the contrary, the trough of the drag appears for the boat-tail, i.e., when the tail angle is negative(-). When the tail angle is 5 degrees, the peak of the drag appears at the body speed of 80m/s and the value of the drag is 43% larger than that at the design speed of 100m/s. When the tail angle is –5 degrees, the trough of the total drag appears at 75m/s and that drag is 30% smaller than that of the cavitator, which means the rest of the body has a negative drag.
참고문헌 (17)
- 안병권, "Experimental investigation of supercavitating flows", International Journal of Naval Architecture and Ocean Engineering, 4(2), pp.123~131 (2012), 대한조선학회[DOI]
- Ahn, S.S., "An integrated aproach to the design of supercavitating underwater vehicles", pp.2007
- Alyanak, E., "Variable shape cavitator design for a super-cavitating torpedo", Proceedings of 10th AIAA, 2004, ~
- "ANSYS 13.0, User's guide, 2010", SAS IP Inc, ~ (2010)
- Balas, G.J., "Control of high-speed underwater vehicles", Control of Uncertain Systems, LNCIS, 329, pp.25~44 (2006)
- 최정규, "고 레이놀즈수 유동의 수치해석시 벽함수 사용에 관한 연구", 대한조선학회 논문집, 47(5), pp.647~655 (2010), 대한조선학회
- Foot, J.P., "Investigation of aluminium particle combustion for underwater propulsion applications", AIAA, ASME, SAE, and ASEE, Joint Propulsion Conference and Exhibit, 32nd (1996)
- Guzevsky L.G., "Hydrodynamic flows and wave processes", pp.82~91 (1983), itute of Thermal Physics
- 김형태, "원뿔 캐비테이터의 항력에 대한 수치해석", 대한조선학회 논문집, 52(4), pp.305~314 (2015), 대한조선학회
- 김형태, "원뿔 캐비테이터의 초공동 크기 추정", 대한조선학회 논문집, 53(2), pp.92~100 (2016), 대한조선학회
- Kim, Y.G., "Propulsion technologies of supercavitating rocket torpedo", Proceedings of the Korean Society of Propulsion Engineers, Fall Conference, pp.383~387 (2011)
- 이현배, "2차원 단순 물체의 초공동 유동에 대한 수치해석", 대한조선학회 논문집, 50(6), pp.436~449 (2013), 대한조선학회
- Miller, T.F., "Green rocket propulsion by reaction of Al and Mg powder and water", Proceedings of 40th AIAA, SAE, pp.ASEE Joint Propulsion Conference and Exhibit, 2004
- 박종열, "분사형 초공동 수중운동체의 Planing 회피에 대한 연구", 대한조선학회 논문집, 53(3), pp.201~209 (2016), 대한조선학회
- Ruggaber, W., "Barracuda-Guidance & Control of a super cavitating high speed underwater missile", UDT Europe 2006 (2006)
- Artificial supercavitation, physics and calculation. Lecture Notes for RTO AVT, "VKI Special Course on Supercavitating Flows", Semenenko, V.N., 2001
- Steady-State cavity studies in a free-jet water tunnel, "Self, M.W.", St. Anthony Falls Hydraulic Laboratory, University of Minnesota, ~, pp.Report No. 47 (1955)