2차원 몰수체의 형상 변화에 따른 초월공동 수치해석
Numerical Analysis of Supercavitation according to Shape Change of the Two-dimensional Submerged Body
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
A cavitator plays an important role to generate the supercavity. Most previous numerical and experimental studies have been focused on the presence of cavitators alone. However, the body behind the cavitator causes a change in the wake flow and hence it affects generation and growth of the supercavity. In this paper, we present a boundary elementary method based on a potential flow analysis, and calculate characteristics of the supercavity formation depending on the change of the body shape of two-dimensional submerged objects. Various parameters such as cone angle of the cavitator, length of the forehead and diameter of the body are considered. The results show that the longer the forepart length, the longer the cavity is created under the same conditions, and also the change in the diameter of the body is the most influential factor on the growth of the supercavity. As a result, we suggest that it is necessary to carefully consider the influence of the body shape during the initial design stage of the supercavitating underwater vehicle.
Abstract
A cavitator plays an important role to generate the supercavity. Most previous numerical and experimental studies have been focused on the presence of cavitators alone. However, the body behind the cavitator causes a change in the wake flow and hence it affects generation and growth of the supercavity. In this paper, we present a boundary elementary method based on a potential flow analysis, and calculate characteristics of the supercavity formation depending on the change of the body shape of two-dimensional submerged objects. Various parameters such as cone angle of the cavitator, length of the forehead and diameter of the body are considered. The results show that the longer the forepart length, the longer the cavity is created under the same conditions, and also the change in the diameter of the body is the most influential factor on the growth of the supercavity. As a result, we suggest that it is necessary to carefully consider the influence of the body shape during the initial design stage of the supercavitating underwater vehicle.
참고문헌 (9)
- Garabedian, P.R., "Calculation of axially symmetric cavities and jets", Pacific Journal of Mathematics, 6(4), pp.611~684 (1956)
- 김지혜, "3차원 축대칭 캐비테이터의 초월공동유동 수치해석", 대한조선학회 논문집, 50(3), pp.160~166 (2013), 대한조선학회
- 김지혜, "축대칭 캐비테이터에서 발생하는 자연 초월공동과 항력 특성에 대한 연구", 대한조선학회 논문집, 53(6), pp.465~472 (2016), 대한조선학회
- 이현배, "2차원 단순 물체의 초공동 유동에 대한 수치해석", 대한조선학회 논문집, 50(6), pp.436~449 (2013), 대한조선학회
- Steady-state cavity studies in a free-jet water tunnel, "Self, M.W.", St. Anthony Falls Hydraulic Laboratory, ~, pp.Report No.47 (1955)
- Silberman, E., "Experimental studies of supercavitating flow about simple two-dimensional bodies in a jet", Journal of Fluid Mechanics, 5(3), pp.337~354 (1959)[DOI]
- Steady two-dimensional cavity flows about slender bodies, "Tulin, M.", Navy Dept, ~ (1953)
- Water tunnel investigation of two-dimensional cavities, "Waid, R.L.", The Hydrodynamics Laboratory of California Institute of Technology, ~, pp.Report No. E-73.6 (1957)
- Wu, T.Y., "A free streamline theory for two-dimensional fully cavitated hydrofoils", Journal of Mathematics and Physics, 35, pp.403~442 (1956)