선수 스러스터를 이용한 실선스케일 조종시험에 관한 연구
A Study on Full-scale Maneuvering Trials using Bow Thruster
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
This study aims to investigate the bow thruster performance of the research vessel “NARA” by full-scale maneuvering trials. The thruster test method refers to ITTC’s recommended procedures and guidelines. Turning tests with the bow thruster are performed at speed conditions of 0, 2, and 4 knots. The test results indicate that the Rate of Turn (ROT) increased when the ship is in a higher speed condition. Due to the position of the propeller and the housing of the bow thruster, there is difference in the efficiency of the bow thruster according to the turning direction. Zigzag tests with the bow thruster were conducted at speed conditions of 2 and 4 knots. At speeds above 4 knots, it seems difficult to change the course only with the bow thruster.
Abstract
This study aims to investigate the bow thruster performance of the research vessel “NARA” by full-scale maneuvering trials. The thruster test method refers to ITTC’s recommended procedures and guidelines. Turning tests with the bow thruster are performed at speed conditions of 0, 2, and 4 knots. The test results indicate that the Rate of Turn (ROT) increased when the ship is in a higher speed condition. Due to the position of the propeller and the housing of the bow thruster, there is difference in the efficiency of the bow thruster according to the turning direction. Zigzag tests with the bow thruster were conducted at speed conditions of 2 and 4 knots. At speeds above 4 knots, it seems difficult to change the course only with the bow thruster.
참고문헌 (12)
- Abramowicz-Gerigk, T., "Full scale measurements of pressure field induced on the quay wall by bow thrusters–indirect method for seabed velocities monitoring", Ocean Engineering, 162, pp.150~160 (2018)
- Ahn, Y. W., "Change of turning angular velocity according to the impellent force of a bow thruster", Jeju National University Marine Science Research Institute, 30(1), pp.33~46 (2006)
- ITTC, "ITTC Recommended Procedures and Guidelines 7.5-04-02-01 Revision 02", ~ (2017)
- 김정창, "Azimuth thruster 시스템을 장착한 나라호의 조종성", 수산해양기술연구, 53(3), pp.276~285 (2017), 한국수산해양기술학회[DOI]
- Mohan, A., "Numerical Analysis of Bow Tunnel Thruster Performance", Master, pp.2017
- Schaap, T., "Changing the cross-sectional geometry of a bow tunnel thruster: Effects on the performance of the thruster at slow forward motion using Computational Fluid Dynamics", Master, pp.2015
- 신현경, "3m Ferry 모형선의 Crabbing 시험", 대한조선학회 논문집, 41(1), pp.40~46 (2004), 대한조선학회
- Turning performance of bow and stern thrusters equipped on the training ship Nagasaki Maru, "Uchida, J.", Nagasaki University fisheries department, ~ (2014)
- 양정훈, "선수 스러스터가 선회성능에 미치는 영향에 관한 연구", 수산해양기술연구, 42(2), pp.111~118 (2006), 한국수산해양기술학회
- Yasukawa, H., "Crabbing Performance of a Twin Screw Vessel with Bow Thruster", Journal of the Society of Naval Architects of Japan, 2001(190), pp.181~190 (2001)
- 여동진, "Bow Thruster가 있는 POD 추진 크루즈선의 Crabbing 시험", 대한조선학회 논문집, 49(4), pp.327~332 (2012), 대한조선학회[DOI]
- 윤현규, "저속시 선체에 작용하는 유체력 수학모형 정립을 위한 모형시험 방안 연구", 대한조선학회 논문집, 42(2), pp.98~104 (2005), 대한조선학회