4-RRPaRR구조의 Schönflies Motion Generator 기구학 특성 분석
Kinematic Characteristics of a 4-RRPaRR Type Schönflies Motion Generator
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This article investigates kinematic characteristics of a Schönflies motion generator which represents a mechanism having translational three Degree-of-Freedom (DOF) and rotational one-DOF motion about a fixed axis. The mechanism consists of the base plate and the moving plate, and four identical limbs connecting them. Each limb employs two revolute joints (RR), one parallelogram (Pa), and two revolute joints (RR) from the base plate to the moving plate. The mechanism is driven by four actuators which are placed on the base plate to minimize dynamic loads. It is shown through simulations that the mechanism can be designed to secure large dexterous workspace and thus has very high potential for actual applications such as haptic devices and high-speed requiring tasks such as pick-and-place operations, riveting, screwing tasks, etc.
Abstract
This article investigates kinematic characteristics of a Schönflies motion generator which represents a mechanism having translational three Degree-of-Freedom (DOF) and rotational one-DOF motion about a fixed axis. The mechanism consists of the base plate and the moving plate, and four identical limbs connecting them. Each limb employs two revolute joints (RR), one parallelogram (Pa), and two revolute joints (RR) from the base plate to the moving plate. The mechanism is driven by four actuators which are placed on the base plate to minimize dynamic loads. It is shown through simulations that the mechanism can be designed to secure large dexterous workspace and thus has very high potential for actual applications such as haptic devices and high-speed requiring tasks such as pick-and-place operations, riveting, screwing tasks, etc.
참고문헌 (20)
- R.S. Ball, "A Treatise on the Theory of Screws" (1900), Cambridge University Press
- J.M, Herve, "The Mathematical Group Structure of the Set of Displacements", Mech. Mach. Theory, 29(1), pp.73~81 (1994)
- Y. Fang, "Structure synthesis of a class of 4‐DOF and 5‐DOF parallel manipulators with identical limb structures", Int. J. Robot. Res, 21(9), pp.799~810 (2002)
- Z. Huang, "Type synthesis of symmetrical lower‐mobility parallel mechanism using the constraint‐synthesis method", Int. J. Robot. Res, 22(1), pp.59~79 (2003)
- X. Kong, "Type synthesis of 3T1R 4‐DOF parallel manipulators based on screw theory", IEEE Trans. Robot. Auto, 20(2), pp.181~190 (2004)
- Q. Li, "Type Synthesis of 3T2R 5‐DOF Parallel Mechanisms Using the Lie Group of Displacements", IEEE Trans. Robot. Auto, 20(2), pp.173~180 (2004)
- X. Kong, "Type synthesis of 4‐ DOF SP‐equivalent parallel manipulators: A virtual chain approach", Mechanism and Machine Theory, 41(11), pp.1306~1319 (2006)
- O. Salgado, "Synthesis and Design of a Novel 3T1R Fully‐Parallel Manipulator", ASME Journal of Mechanical Design, 130(3) (2008)
- R. Clavel, "Delta, a fast robot with parallel geometry", 18th Int’l Symp. On Industrial Robots, pp.91~100 (1988), IFS Publications
- H.B. Choi, "Design and control of a novel 4‐DOF parallel robot H4", Proc. IEEE Int. Conf. Robot. Auto, pp.1185~1190 (2003)
- S. Krut, "I4 : New parallel mechanism for Scara motions", Proc. IEEE Int. Conf. Robot. Auto, pp.1875~1880 (2003)
- O. Company, "A new high‐speed 4‐DOF parallel robot synthesis and modeling issues", IEEE Trans. Robot. Auto, 19(3), pp.411~420 (2003)
- S. Krut, "A high‐speed parallel robot for Scara motions", Proc. IEEE Int. Conf. Robot. Auto, pp.4109~4115 (2004)
- S. Krut, "Internal Singularity Analysis of a Class of Lower Mobility Parallel Manipulators With Articulated Traveling Plate", IEEE Transactions on Robotics, 22(1), pp.1~11 (2006)
- F. Pierrot, "Optimal design of a 4‐DOF parallel manipulator: from academia to industry", IEEE Transactions on Robotics, 25(2), pp.213~224 (2009)
- A. Cammarata, "Kinetostatic and Inertial Conditioning of the McGill Schönflies‐Motion Generator" (2010), Hindawi Publishing Corporation
- P.L. Richard, "Kinematic Analysis and Prototyping of a Partially Decoupled 4‐DOF 3T1R Parallel Manipulator", ASME Journal of Mechanical Design, 129, pp.611~616 (2007)
- 김희국, "평면형 모바일 로봇의 모빌리티에 대한 분석", 제어.로봇.시스템학회 논문지, 8(3), pp.243~248 (2002), 제어·로봇·시스템학회
- 김희국, "Kinematic Analysis and Optimal Design of a 3T1R Type Parallel Mechanism", 2009 IEEE Internatinal conference on robotics and automation, pp.2199~2204 (2009), IEEE
- O. Ma, "Architecture singularities of parallel manipulators", IEEE Trans. on Robot. Auto, 7(1), pp.23~29 (1992)