병렬로봇의 설계 공차가 궤적 정밀도에 미치는 영향 분석
The Analysis of Trajectory Tracking Error Caused by the Tolerance of the Design Parameters of a Parallel Kinematic Manipulator
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Machining error makes the uncertainty of dimensional accuracy of the kinematic structure of a parallel robot system, which makes the uncertainty of kinematic accuracy of the end-effector of the parallel robot system. In this paper, the tendency of trajectory tracking error caused by the tolerance of design parameters of the parallel robot is analyzed. For this purpose, all the position errors are analyzed as the manipulator is moved on the target trajectory. X, Y, Z components of the trajectory errors are analyzed respectively, as well as resultant errors, which give the designer of the manipulator the intuitive and deep understanding on the effects of each design parameter to the trajectory tracking errors caused by the uncertainty of dimensional accuracy. The research results shows which design parameters are critically sensitive to the trajectory tracking error and the tendency of the trajectory tracking error caused by them.
Abstract
Machining error makes the uncertainty of dimensional accuracy of the kinematic structure of a parallel robot system, which makes the uncertainty of kinematic accuracy of the end-effector of the parallel robot system. In this paper, the tendency of trajectory tracking error caused by the tolerance of design parameters of the parallel robot is analyzed. For this purpose, all the position errors are analyzed as the manipulator is moved on the target trajectory. X, Y, Z components of the trajectory errors are analyzed respectively, as well as resultant errors, which give the designer of the manipulator the intuitive and deep understanding on the effects of each design parameter to the trajectory tracking errors caused by the uncertainty of dimensional accuracy. The research results shows which design parameters are critically sensitive to the trajectory tracking error and the tendency of the trajectory tracking error caused by them.
참고문헌 (9)
- 신욱진, "3자유도 병렬기구의 위치오차 보정기술에 관한 연구", 한국생산제조학회지, 13(3), pp.44~52 (2004), 한국생산제조학회
- 박찬훈, "병렬로봇의 설계공차 설정에 따른 기계적 정밀도의 영향 분석", 제어.로봇.시스템학회 논문지, 22(10), pp.847~852 (2016), 제어·로봇·시스템학회[DOI]
- R. Clavel, "Conception d’un robot parallèle rapide à 4 degrés de liberté", Ph.D, pp.1991
- R. Clavel, "Device for the movement and positioning of an element in space", US Patent No.4,976,582, ~ (1990)
- J.-P. Merlet, "Parallel Robots" (2000), Kluwer Academic Publishers
- K. Miller, "Modeling of dynamics and model-based control of DELTA direct-drive parallel robot", Journal of Robotics and Mechatronics, 17(4), pp.344~352 (1995)
- 이상호, "4절링크를 기반으로 하는 신개념 ATC 메커니즘의 동역학 해석", 제어.로봇.시스템학회 논문지, 22(4), pp.307~314 (2016), 제어·로봇·시스템학회[DOI]
- PIAOJINLONG, "평면형 케이블 구동 병렬로봇의 구조에 따른 진동분석", 로봇학회 논문지, 11(2), pp.073~082 (2016), 한국로봇학회[DOI]
- 박재현, "회전관절만을 활용하는 병진 3자유도 병렬 메커니즘의 기구학 특성 분석", 로봇학회 논문지, 10(2), pp.119~132 (2015), 한국로봇학회