4자유도 새로운 소프트 핑거 설계
Design of a new 4-DOF soft finger mechanism
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
A new soft finger mechanism using a spring as a backbone is proposed in this work. It is a 4 DOF mechanism that consists of a spring and 3 cylinders, which behave like joints with 3 up-and-down rotations and 1 left-and-right rotation. To control each joint, cylinders have small holes in their crosssectional areas, and wires of different length are penetrated into these holes. We can control each joint by pulling the corresponding wire. The forward kinematics is solved by using the geometry of mechanism. And the relationship (Jacobian) between the linear velocity of the wires and the joint angular rate is obtained. A virtual simulator is developed to test the validity of the kinematic model. In the experiment, first, the position control is conducted by tracking a given trajectory. Second, to verify the flexibility and safety, we show that the soft finger deflects in a safe manner, in spite of the collision with environment.
Abstract
A new soft finger mechanism using a spring as a backbone is proposed in this work. It is a 4 DOF mechanism that consists of a spring and 3 cylinders, which behave like joints with 3 up-and-down rotations and 1 left-and-right rotation. To control each joint, cylinders have small holes in their crosssectional areas, and wires of different length are penetrated into these holes. We can control each joint by pulling the corresponding wire. The forward kinematics is solved by using the geometry of mechanism. And the relationship (Jacobian) between the linear velocity of the wires and the joint angular rate is obtained. A virtual simulator is developed to test the validity of the kinematic model. In the experiment, first, the position control is conducted by tracking a given trajectory. Second, to verify the flexibility and safety, we show that the soft finger deflects in a safe manner, in spite of the collision with environment.
참고문헌 (13)
- X. T. Le, "Design of a flexible multifingered robotics hand with 12 D0F and its applications", SICEICASE, Int. Joint Conf, 2006, pp.3461~3465 (2006)
- T. Takahashi, "Adaptive grasping by multi fingered hand with tactile sensor based on robust force and position control", in Int. Conf. Robotics and Automation 2008, pp.264~271 (2008)
- V. Bégoc, "Mechanical design of a new pneumatically driven underactuated hand", in Int. Conf. Robotics and Automation, 2007, pp.927~933 (2007)
- M. Ceccarelli, "Design considerations for underactuated grasp with a one DOF anthropomorphic finger mechanism", in proc. IEEE, 2006, 1611~1616
- I. Kao, "Stiffness and Contact Mechanics for Soft Fingers in Grasping and Manipulation", IEEE Trans. Robotics and Automation, 20(1), pp.132~135 (2004)
- T. Inoue, "Stable Manipulation Mechanisms on Soft Fingers", IEEE, 2007, 1~6
- M. Yoshida, "Blind Grasp and Manipulation of a Rigid Object by a Pair of Robot Fingers with Soft Tips", IEEE Int. Conf. on Robotics and Automation, pp.4707~4714 (2007)
- P. Nguyen, "Performance of Pinching Motions of Two Multi-DOF Robotics Fingers with Soft- Tips", IEEE Int. Conf. on Robotics and Automation, pp.2344~2349 (2001)
- T.Inoue, "Elastic Model of Deformable Fingertip for Soft-Fingered Manipulation", IEEE Trans. Robotics, 22(6), pp.1273~1279 (2006)
- K. Murakami, "Novel Fingertip with Soft Skin and Hard Nail for Dexterous Multi-fingered Robotic Manipulation", IEEE Int. Conf. on Robotics and Automations, pp.708~713 (2003)
- Clement Gosselin, "An anthropomorphic underactuated robotic hand with 15 DOFs and a single actuator", in Int. Conf. Robotics and Automation, 2008, pp.749~754 (2008)
- S. Y. Jung, "Design of Robotic Hand with Tendon-driven Three Fingers", Int. Conf. on Control, Automation and Systems, pp.83~86 (2007)
- F. Lotti, "Development of UB Hand 3: Early Results", IEEE Int. Conf. on Robotics and Automation, pp.4488~4493 (2005)