본문 바로가기
KERD
논문KCI 등재

다양한 광원으로 중합한 치과용 접착제의 전단강도에 관한 비교 연구

THE COMPARATIVE STUDY FOR THE SHEAR BOND STRENGTH OF DENTAL ADHESIVES CURED WITH VARIOUS LIGHT SOURCES

조성훈|김선미|최남기
대한소아치과학회 (The Korean Academy Of Pediatric Dentistry)|2011.02|대한소아치과학회지 (Journal of the Korean academy of pediatric dentistry)|제38권 제1호|pp. 33-41

0

조회

0

다운로드

0

인용

0

참고문헌

키워드

Shear bond strength전단결합강도Dentin bonding system상아질결합제광중합시스템Light curing system
주제분류치의학

초록

본 연구의 목적은 상업용으로 시판되고 있는 수종의 치과용 접착제를 세대별로 분류하여 서로 다른 광원에 노출 시켜 중합하고 접착면의 전단 강도 측정을 통해 결합강도를 비교함으로써 간접적으로 광원에 따른 접착제의 중합 양상을 알아보고 소아치과 영역에서 가장 권장할만한 치과용 접착제와 광원 종류의 조합을 알아보고자 함이다. 본 연구에서는 최근에 개발된 치과용접착제를 대상으로 다른 유형의 광원으로 중합하였을 때 영구치 상아질에 대한 결합력비교 평가하여 임상에서 상아질결합제와 광중합 시스템의 적절한 조합을 선택하는데 도움을 주고자 시행하였으며, 실험재료로 Adper Scotchbond Multi-purpose Plus Adhesive (SM; 3M ESPE, USA), Adper Single bond 2 (SB; 3M ESPE,USA), Clearfil SE Bond (SE; Kuraray Medical Inc., Japan), Adper Prompt L-Pop (PL; 3M ESPE, USA), GBond (GB; GC Cooperation Toyko, Japan)을 이용하여 Elipar Free light 2(LED; 3M ESPE, USA), OptiLux 501(Halogen, Kerr, USA), Flipo (PAC, LOKKI, FRA) 세 가지의 광원으로 중합하고 전단결합강도를 평가한 뒤 다음과 같은결과를 얻었다. 1. Freelight 2로 중합하였을 때 전단결합강도는 SM이 가장 높았으며(28.22±5.56), SB(21.68±7.44), SE(20.13±9.88), PL(14.18±5.88), GB(14.30±6.81) 순이었다. SM은 PL, GB와 유의한 차이가 있었으나 (p<0.05), SB,SE, PL, GB 간에는 차이가 없었다. 2. Optiux 501로 중합하였을 때 전단결합강도는 SM이 가장 높았으며 (22.06±7.95), PL(12.94±4.96), SB(12.80±3.35), SE(12.43±4.79), GB(10.00±3.47) 순이었고, SM만 유의한 차이가 있었으나 (p<0.05), 다른 군 간에는 차이가 없었다. 3. Flipo로 중합하였을 때 전단결합강도는 SM이 가장 높았으며 (26.82±11.16), PL(15.42±9.35), SB(10.96±3.74),SE(9.39±3.74), GB(7.85±2.22) 순이었다. SM은 SB, SE, GB 군과 유의한 차이가 있었으나 (p<0.05), 다른 군 간에는 차이가 없었다4. 광원에 따른 차이는 SB와 GB에서만 유의성이 있었고, 다른 결합제에서는 유의한 차이가 없었다. 광원에 따른 유의성을나타낸 결합제 중 SB는 Freelight 2가 다른 광원에 비해 유의한 차이를 보였고 OptiLux 501과 Flipo간의 차이가 없었던 반면, GB는 Freelight 2와 Flipo 간에만 유의한 차이를 나타냈다

Abstract

The objective of this study was to compare the shear bond strengths of five dentin adhesive systems cured with three different light curing sources. Seventy five noncarious permanent teeth were collected and stored in an 0.1% thymol solution at room temperature after extraction. The tested adhesives were: Adper Scotchbond Multi-purpose Plus Adhesive (SM)Adper Single bond 2 (SB), Clearfil SE Bond (SE), Adper Prompt L-Pop (PL), G-Bond (GB). And three light curing unit systems were used: Elipar Free light 2(LED), OptiLux 501 (Halogen), Flipo (PAC). For the shear bonding test, the labial and lingual surfaces of permanent teeth were used. To obtain a flat dentin surface, the labial and lingual surfaces of the teeth were sanded on SiO2 with number 600 grit and then divided into 15groups of 10 surfaces each. All samples were theromocycled in water 5℃ and 55℃ for 1000 cycles. The results were as follows:1. When cured with Freelight 2, the shear bond strength of SM was significantly higher than that of PL, GB (p<0.05), whereas no significant difference was found among those of any other bonding agents. 2. When cured with Optilux 501, the shear bond strength of SM was significantly higher than those of any other bonding agents (p<0.05), whereas no singnificant difference was found among those of andy other bonding agents. 3. When cured with Flipo, the shear bond strength of SM was significantly higher than those of SB, SE, GB (p<0.05), whereas no significant differences was found among those of any other bonding agents. 4. For comparison according to three different light cure unit system, except SB and GB, each three dentin bonding agents showed no significant difference. For SB, only Freelight 2 was significantly higher than the others, with no significant difference between Optilux 501 and Flip. For GB, Statistically significant difference was found only between Freelight and Flipo.

참고문헌 (53)

  1. Pires JF, "Effects of curing tip distance on light intensity and composite resin microhardness", Quintessence Int, 24, pp.517~521 (1993)
  2. 오유향, "광중합 광원의 종류와 조사시간에 따른 치면열구전색제의 미반응 모노머 용출", 대한소아치과학회지, 31(3), pp.421~430 (2004), 대한소아치과학회
  3. Roberson TM, "Operative dentistry 4th ed", pp.177~211 (2002), Mosby, Inc. St. Louis
  4. 대한치과보존학회, "치과보존학", pp.231~266 (2001), 신흥인터내셔날, 서울
  5. Althoff O, "Advances in light curing", Am J Dent, 13, pp.77~81 (2000)
  6. 최남기, "다양한 광원에 의한 광중합형 수복물질의 미세경도에 관한 연구", 대한소아치과학회지, 32(4), pp.634~643 (2005), 대한소아치과학회
  7. 권민석, "광원의 유형에 따른 광중합 수복재의 중합양상", 대한소아치과학회지, 30(2), pp.3~ (2003), 대한소아치과학회
  8. 박창후, "광중합기 종류에 따른 복합레진과 콤포머의 미세누출에 관한 연구", 대한소아치과학회지, 33(3), pp.438~446 (2006), 대한소아치과학회
  9. 문현정, "콤포짓트 레진의 중합체계에 따른 중합률 및 잔류 단량체의 유출", 대한치과기자재학회지, 28, pp.169~178 (2001)
  10. Hannig M, "In-vitro pulp chamber temperature rise during composite resin polymerization with various light-curing sources", Dent Mater, 15, pp.275~281 (1999)
  11. Uhl A, "Polymerization and light-induced heat of dental composites cured with LED and halogen technology", Biomater, 24, pp.1809~1820 (2003)
  12. Tarle Z, "Composite conversion and temperature rise using a conventional, plasma arc, and an experimental blue LED curing unit", J Oral Rehabil, 29, pp.662~667 (2002)
  13. Barghi N, "Evaluating intensity output of curing lights in private dental offices", J Am Dent Assoc, 125, pp.992~996 (1994)
  14. Oberholzer TG, "Effect of LED curing on the microleakage, shear bond strength and surface hardness of a resin-based composite restoration", Biomater, 26, pp.3981~3986 (2005)
  15. Attar N, "Effect of two light-emitting diode(LED) and one halogen curing light on the microleakage of Class V flowable composite restorations", J Contemp Dent Pract, 8(2), pp.080~088 (2007)
  16. Uhl A, "The influence of storage and indenter load on the Knoop hardness of dental composites polymerized with LED and halogen technologies", 20, pp.21~28 (2004)
  17. Dunn WJ, "A comparison of polymerization by light-emitting diode and halogen-based lightcuring units", J Am Dent Assoc, 133, pp.335~341 (2002)
  18. Mills RW, "High power light emitting diode (LED) arrays versus halogen light polymerization of oral biomaterials: Barcol hardness, compressive strength and radiometric properties", Biomater, 23, pp.2955~2963 (2002)
  19. Stahl F, "Lightemitting diode (LED) polymerisation of dental composites: flexural properties and polymerisation potential", Biomater, 21, pp.1379~1385 (2000)
  20. Swanson T, "Shear bond strength of orthodontic brackets bonded with light-emitting diode curing units at various polymerization times", Am J Orthod Dentofacial Orthop, 125, pp.337~341 (2004)
  21. Nomoto R, "Light exposure required for optimum conversion of light activated resin systems", Dent mater, 22, pp.1135~1142 (2006)
  22. Sfondrini MF, "Effect of light-tip distance on the shear bond strengths of resin-modified glass ionomer cured with high-intensity halogen, light-emitting diode and plasma arc lights", Am J Orthod Dentofacial Orthop, 129, pp.541~546 (2006)
  23. Cacciafesta V, "Effect of light-tip distance on the shear bond strengths of composite resin", Angle Orthod, 75, pp.386~391 (2005)
  24. 김민수, "수종의 광중합기를 이용한 교정용 광중합형 글라스 아이오노머 시멘트의 전단 결합 강도에 관한 연구", 대한소아치과학회지, 34(1), pp.81~90 (2007), 대한소아치과학회
  25. Pettemerides AP, "An Ex Vivo Investigation into the use of a plasma arc lamp when using a visible light-cured composite and a resin-modified glass poly(alkenoate) cement in orthodontic bonding", J Orthod, 28, pp.237~244 (2001)
  26. Oesterle LJ, "Rapid curing of bonding composite with a xenon plasma arc light", Am J Orthod Dentofacial Orthop, 119, pp.610~616 (2001)
  27. Thind BS, "A comparison of tungsten-quartz-halogen, plasma arc and light-emitting diode light sources for the polymerization of an orthodontic adhesive", Europ J Orthod, 28, pp.78~82 (2006)
  28. Signorelli MD, "Comparison of bond strength between orthodontic brackets bonded with halogen and plasa arc", Am J Orthod Dentofacial Orthop, 129(2), pp.277~282 (2006)
  29. Sfondrini MF, "Effects of conventional and high-intensity light curing on enamel shear bond strength of composite resin and resin-modified glass-ionomer", Am J Orthod Dentofacial Orthop, 119, pp.30~35 (2001)
  30. Manzo B, "Clinical trial comparing plasma arc and conventional halogen curing lights for orthodontic bonding", Am J Orthod Dentofacial Orthop, 125, pp.30~35 (2004)
  31. Yoon TH, "Degree of polymerization of resin composites by different light sources", J Oral Rehabil, 29, pp.1165~1173 (2002)
  32. Buonocore M, "A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces", J Dent Res, 34, pp.849~853 (1955)
  33. Davison CL, "The competition between the composite-dentin bond strength and polymerization constraction stress", J Dent Res, 63, pp.1396~1399 (1984)
  34. Munksgaard EC, "Dentin-polymer bond prompted by Gluma and various resins", J Dent Res, 64, pp.1409~1411 (1985)
  35. Ateyah NZ, "Shear bond strengths and microleakage of four types of dentin adhesive materials", J Contemp Dent Pract, 5, pp.63~73 (2004)
  36. Bouillaguet S, "Bond strength of composite to dentin using conventional one-step and self-etching adhesive systems", J Dent, 29, pp.55~61 (2001)
  37. Soderholm KJ, "Shear bond strength of one 4th and 7th generation bonding experiences", J Adhes Dent, 7, pp.57~64 (2005)
  38. Atash R, "Bond strengths of eight contemporary adhesives to enamel and to dentine in vitro study on bovine primary teeth", Int J Paediatr Dent, 15, pp.264~273 (2005)
  39. Hansen EK, "Reliability of three dental radiometers", Scand J Dent Res, 101(2), pp.115~119 (1993)
  40. 김선영, "Dentin bond strength of bonding agents cured with light emitting diode", Restorative Dentistry and Endodontics, 29(6), pp.504~514 (2004), 대한치과보존학회
  41. Miyazaki M, "Evaluaiton of curing units used in private dental offices", Oper Dent, 23, pp.50~54 (1998)
  42. Leonard DL, "Effect of curing tip diameter on the accuracy of dental radiometers", Oper Dent, 24, pp.31~37 (1999)
  43. Cook WD, "Spectral distribution of dental photopolymerization sources", J Dent Res, 61, pp.1436~1438 (1982)
  44. McCabe JF, "Ountput from visible-light activation units and depth of cure of light-activated composites", J Dent Res, 68, pp.1534~1539 (1989)
  45. Nomoto R, "Effect of light wavelength on polymerization of light-cured resins", Dent Mater J, 16, pp.60~73 (1997)
  46. Fujibayashi K, "Newly developed curing unit using blue light-emitting diodes", Dent Jap, 34, pp.49~53 (1998)
  47. Mills RW, "Dental composite depth of cure with halogen and blue light emitting diode (LED) technology", Br Dent J, 186, pp.388~391 (1994)
  48. Mills RW, "Optical power outputs, spectral and dental composite depths of cure obtained with blue light emitting diode (LED) and halogen light curing units (LCUs)", Br Dent J, 193, pp.459~463 (2002)
  49. Brackett WW, "Effect of plasma arc curing on the micro -leakage of Class V resin-based composite restorations", Am J Dent, 13, pp.121~122 (2000)
  50. Rueggeberg FA, "Polymerization depths of con- temporary light-curing units using microhardness", J Esthet Dent, 12(6), pp.340~349 (2000)
  51. Roberts WW, "Effect of plasma arc curing on the micro-leakage of Class V resinbased composite restorations", Am J Dent, 13, pp.121~122 (2000)
  52. Hofmann N, "Comparison between a plasma arc light source and conventional halogen curing units regarding flexural strength, modulus, and hardness of photoactivated resin composites", Clin Oral Investig, 4, pp.140~147 (2000)
  53. Peutzfeldt A, "Characterization of resin composites polymerized with plasma arc curing units", Dent mater, 16, pp.330~336 (2000)

관련 논문AI추천

유치와 영구치에서 치과용 접착제의 전단결합강도박영준, 양규호, 최남기, 최진영, 최충호대한소아치과학회 · 대한소아치과학회지2007 · 제34권 제4호복합레진의 exponential 중합법이 상아질접착제의 미세인장접착강도에 미치는 영향서덕규, 성소래, 손호현, 이인복, 조병훈대한치과보존학회 · Restorative Dentistry and Endodontics2010 · 제35권 제2호유동성 레진 수복술에서 접착제 중합 여부에 따른 미세누출과 전단결합강도에 관한 연구김종수, 박용규, 유승훈대한소아치과학회 · 대한소아치과학회지2007 · 제34권 제3호전단접착강도와 관련된 Plasma Arc Curing Light의 중합효율평가권영철, 김선영, 손호현, 엄정문, 이인복, 정세준, 조병훈, 한영철대한치과보존학회 · Restorative Dentistry and Endodontics2008 · 제33권 제3호Dentin bond strength of bonding agents cured with light emitting diode김미자, 김선영, 석창인, 손호현, 엄정문, 이인복, 조병훈대한치과보존학회 · Restorative Dentistry and Endodontics2004 · 제29권 제6호유치 상아질에 대한 수종의 상아질 결합제의 전단결합강도에 대한 연구강선희, 김대업, 이광희대한소아치과학회 · 대한소아치과학회지2005 · 제32권 제2호

이 간행물의 다른 논문 (13건)

5% EMLA cream과 20% Benzocaine gel의 도포마취 효능 비교양연미, 이대우, 백병주, 소유려, 김재곤pp. 1-8어린이와 어머니의 Streptococcus mutans 분포와 전이양연미, 김재곤, 정해경, 송희정, 백병주, 김미아pp. 9-16미성숙 영구 전치의 외상 후 MTA를 이용한 치근단 형성술 : 후향적 연구마연주, 공은경, 홍소이, 안병덕, 정영정, 정서영pp. 17-24서울대학교 치과병원 소아치과에 내원한 신환 분포 및 내원 동기에 관한 연구한세현, 현홍근, 김영재, 이상훈, 김정욱, 김효정, 김종철, 장기택pp. 25-32항생제를 이용한 미성숙 영구치의 치험례최성철, 조해성, 김소정, 정윤주, 박재홍pp. 44-50
원문 보기