유치 상아질에 대한 수종의 상아질 결합제의 전단결합강도에 대한 연구
The study on Shear bond strength of various dentin bonding systems inprimary dentin
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
소아환자의 수복치료에서 시술시간과 시술과정을 줄이는 것은 중요한 점이다. 복합레진은 물성의 증가로 영구치, 유치 전치부 심미수복재로서 뿐만 아니라 구치부 수복에도 많이 쓰이고 있다. 최근에 개발된 7세대 상아질 결합제는 기존의 복합레진을 치면에 부착하기위해 필요했던 산부식, 프라이밍, 접착재 도포의 복잡한 과정을 한번의 처리로 단순화하였다. 본 연구에서는 유치 상아질에서 7세대 상아질 결합제의 결합력을 기존에 사용되고 있는 여러 결합제의 결합력과 비교하였다.1, 2, 3, 4군은 각각 4, 5, 6, 7세대 상아질 결합제를 사용하였다. 유치 상아질을 노출시키고 군에 따라 상아질 면을 처리한 후에 직경 2.5㎜, 높이 2.0㎜의 주형을 이용하여 복합레진을 접착시키고 열순환을 시행한 다음 전단결합강도를 측정하여 다음과 같은 결론을 얻었다. 1. 5세대 상아질 결합제인 Clearfil SE Bond가 가장 높은 전단결합강도인 27.87±5.33㎫ 를 보였다. 이것은 4, 6, 7세대와 비교했을 때 통계학적으로 유의하였다. 2. 4세대 상아질 결합제의 전단결합강도는 20.11±5.73㎫로 6, 7세대보다는 약간 높게 나 타났지만 통계적으로 유의한 차이는 보이지 않았다. 3. 6, 7세대 상아질 결합제의 전단결합강도는 유사하게 나타났다.
Abstract
It is important to reduce chair time and procedure in restorative treatment for children. Composite resin is not only used in esthetic restoration of anterior teeth but also posterior teeth by its improved physical property. The 7th generation dentin bonding system was recently developed in order to simplify three steps which is needed to bond composite resin to tooth surface - etchant, primer, adhesive. We compared shear bond strengths of 4, 5, 6, 7th generations dentin bonding systems. The primary dentin was pretreated with 4, 5, 6, 7th generation dentin bonding systems. Then composite resin was cured to the specimen using molds 2.5㎜ in diameter and 2㎜ in height. Thermocycling was performed and shear bond strength was finally measured. The results were as follow; 1. The mean values of shear bond strengths in 5th generation dentin bonding system(group 2) were greater than those of 4, 6, 7th generation dentin bonding system(group 1, 3, 4). The differences were statistically significant. 2. The mean values of shear bond strengths in 4th generation dentin bonding system(group 2) were greater than those of 6, 7th generation dentin bonding system(group 1, 3, 4). But, the differences were not statistically significant. 3. Between the mean values of shear bond strengths in 6, 7th generation dentin bonding system(group 3, 4) were similar.
참고문헌 (27)
- "Present Status of Conservative Esthetic Restoration", 40, pp.572~580 (2002), 대한치과의사협회지
- "The overwet phenomenon : an optical, micromorphological study of surface moisture in the acid-conditioned", (men), pp.43~48 (1996)
- "efficacy of dentin-bonding agents", pp.329~333 (1989), Munksgaard EC
- "Bond strength of composite to dentin using conventional,one-step,and self-etching adhesive systems", 29, pp.55~61 (2001)
- "an alternative to the conventional acid etch technique", pp.238~245 (2001)
- "Bonding to enamel and dentin using self-etching adhesive systems", 35, pp.367~370 (2004)
- "The competition between the composite-dentin bond strength and polymerization constraction stress", 63, pp.1396~1399 (1984)
- "Dentin-polymer bond prompted by Gluma and various resins", 64, pp.1409~1411 (1985)
- "In-vitro pulp chamber temperature rise during composite resin polymerization with various light-curing sources", 15, pp.275~281 (1999)
- "Microleakage of composite restorations with various etching times", 25, pp.573~576 (1994)
- "Optimal cavity wall treatment for adhesive restoration", 2, pp.95~99 (1990)
- "Creating a reliable bond.An all-in-one system", 13, pp.85~87 (2000)
- "The effects of acid etching on the pulpodentin complex", 17, pp.229~242 (1992)
- "Effect of dentin pretreatment procedures on the microleakage of a dentin bonded composit resin material", 19, pp.365~367 (1988)
- "Effects of reduced acid conditioning time on enamel microleakage", 35, pp.278~280 (1987)
- "Resin to enamel bond strengths with various etching times", 22, pp.47~49 (1991)
- "A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces", 34, pp.849~853 (1955)
- "Experimental analytical electron microscopic studies on the quantitative analysis of elemental concentrations in biological thin specimens and its application to dental science", 90, pp.1019~1036 (1990)
- "상아질 산처리 방법에 따른 레진-상아질 경계면에서 Hybrid층의 형성에 관한 연구" (1998)
- "Dentin bonding:SEM comparison of the resin-dentin interface in primary and permanent teeth", 75, pp.1396~1403 (1996)
- "Micro-tensile bond strength of self-etching primer adhesive systems to human coronal carious dentin", pp.1023~1028 (2004)
- "유치에서 All-In-One system의 적용 시간과 적용 횟수에 따른 전단 결합 강도 및 혼성층 형성에 관한 연구", 30, pp.263~271 (2003)
- "The promotion of adhesion by the infiltration of monomers into tooth substrates", 16, pp.265~273 (1982)
- "'No-bottle' vs 'multi-bottle' dentin adhesives-a microtensile bond strength and morphological study", 17, pp.373~380 (2001)
- "Shear bond strengths of one-bottle dentin adhesives using muiltiple applications", 22, pp.194~199 (1997)
- "The science of bonding:from first to sixth geneartion", 131, pp.20~25 (2000)
- "Scanning electron microscopic investigation of human dentinal tubules", 21, pp.355~362 (1976)