Effect of starting materials on the properties of solid-state reacted barium titanate powder
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study examined the effects of the combination of starting materials on the properties of solid-state reacted BaTiO3 using two different types of BaCO3 and TiO2. The reaction temperature was evaluated by thermal gravimetry/differential thermal analysis (TG/DTA). In addition, the effect of mechanochemical activation by high energy milling and the Ba/Ti molar ratio on the reaction temperature, particle size and tetragonality were investigated. TG/DTA demonstrated that the TiO2 phase and size plays a major role in decreasing the reaction temperature and particle size. With the optimum selection of starting materials and processing conditions, BaTiO3 with a particle size < 200 nm and a tetragonality (= c/a) of approximately 1.008 was obtained.
Abstract
This study examined the effects of the combination of starting materials on the properties of solid-state reacted BaTiO3 using two different types of BaCO3 and TiO2. The reaction temperature was evaluated by thermal gravimetry/differential thermal analysis (TG/DTA). In addition, the effect of mechanochemical activation by high energy milling and the Ba/Ti molar ratio on the reaction temperature, particle size and tetragonality were investigated. TG/DTA demonstrated that the TiO2 phase and size plays a major role in decreasing the reaction temperature and particle size. With the optimum selection of starting materials and processing conditions, BaTiO3 with a particle size < 200 nm and a tetragonality (= c/a) of approximately 1.008 was obtained.
참고문헌 (12)
- 윤당혁, "Tetragonality of barium titanate powder for a ceramic capacitor application", Journal of Ceramic Processing Research, 7(4), pp.343~354 (2006), 세라믹공정연구센터
- K. Uchino, , J. Am. Ceram. Soc, 72, pp.1555~1558 (1989)
- S.W. Kwon, , J. Eur. Ceram. Soc, 27, pp.247~252 (2007)
- T. Tsurumu, , J. Am. Ceram. Soc, 89(4), pp.1337~1341 (2006)
- E. Brzozowski, , Thermochimica Acta, 398, pp.123~129 (2003)
- Y. Hotta, , Mater. Sci. Eng. A, 475, pp.12~16 (2008)
- X. Wang, , J. Eur. Ceram. Soc, 26, pp.2319~2326 (2006)
- S. Wada, , J. Mater. Sci, 38, pp.2655~2660 (2003)
- S. Ohara, , Mater. Lett, 62, pp.2957~2959 (2008)
- A. Beauger, , J. Mater. Sci, 18, pp.3041~3047 (1983)
- S.W. Kwon, , Ceram. Int, 33, pp.1357~1362 (2007)
- N. Darsono, , App. Surf. Sci, 254, pp.3412~3419 (2008)