Properties and rapid consolidation of (W,Ti)C-CNT by pulsed current activated sintering
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The grain size of (W,Ti)C powder remarkably decreases with a high-energy ball milling. The rapid sintering of nanostuctured(W,Ti)C and (W,Ti)C-CNT hard materials was investigated with pulsed current activated sintering. The advantage of thisprocess is that it allows very quick densification to near theoretical density and prohibition of grain growth in nanostucturedmaterials. A dense nanostructured (W,Ti)C and (W,Ti)C-CNT hard material with a relative density of up to 99% wasproduced with simultaneous application of 80 MPa pressure and a pulsed current of 2000A within 3 minutes. The effect ofCNT on the sintering behavior and mechanical properties of (W,Ti)C was investigated.
Abstract
The grain size of (W,Ti)C powder remarkably decreases with a high-energy ball milling. The rapid sintering of nanostuctured(W,Ti)C and (W,Ti)C-CNT hard materials was investigated with pulsed current activated sintering. The advantage of thisprocess is that it allows very quick densification to near theoretical density and prohibition of grain growth in nanostucturedmaterials. A dense nanostructured (W,Ti)C and (W,Ti)C-CNT hard material with a relative density of up to 99% wasproduced with simultaneous application of 80 MPa pressure and a pulsed current of 2000A within 3 minutes. The effect ofCNT on the sintering behavior and mechanical properties of (W,Ti)C was investigated.
참고문헌 (24)
- S. Imasato, , Int. J. of Refract. Met. and Hard Mater, 13(5), pp.305~312 (1995)
- E.A. Almond, , Mater. Sci. Eng. A, 105, pp.106 (1988), 237~248
- G. Gille, , Int. J. of Refract. Met. and Hard Mater, 18(2-3), pp.87~102 (2000)
- P. Goeuriot, , Ceramics International, 13(2), pp.99~103 (1987)
- E. T. Thostenson, , Composites Science and Technology, 65, pp.491~496 (2005)
- L. Fu, , Scripta Materialia, 44, pp.1061~1065 (2001)
- Hyun-Su Kang, "Rapid synthesis and consolidation of nanostructured (Mo,W)Si2 by high-frequency induction heated sintering and its mechanical properties", Journal of Ceramic Processing Research, 15(5), pp.286~289 (2014), 세라믹공정연구센터[DOI]
- S. Berger, , Progress in Materials, 42, pp.311~322 (1997)
- Z. Fang, , Int. J. of Refractory Met. & Hard Mater, 13, pp.297~302 (1995)
- 강현수, "나노구조 (Mo,W)Si2 급속소결과 기계적 특성", 대한금속·재료학회지, 52(8), pp.623~629 (2014), 대한금속·재료학회
- 강현수, "나노구조 MgAl2O4-Mg3Al2Si3O12 복합재료 합성과 동시 소결 및 기계적 성질", 대한금속·재료학회지, 52(10), pp.777~782 (2014), 대한금속·재료학회[DOI]
- M. Sommer, , Int. J. of Refractory Met. & Hard Mater, 20, pp.41~46 (2002)
- B. R. Kang, , Korean J. Met. Mater, 53(4), pp.255~260 (2015)
- 손인진, "Mechanochemical Synthesis and Rapid Consolidation of Binderless Nanostructured (Ti,V)C by Pulsed Current Activated Heating and Its Mechanical Properties", 대한금속·재료학회지, 52(5), pp.343~346 (2014), 대한금속·재료학회
- 손인진, "펄스전류 활성 소결에 관한 연구", 대한금속·재료학회지, 52(8), pp.573~580 (2014), 대한금속·재료학회
- C. Suryanarayana, "X-ray Diffraction A Practical Approach" (1998), Plenum Press
- S. I. Cha, , Mater. Sci. Eng. A, 356, pp.381~389 (2003)
- J. Zhao, , Int. Journal of Refractory Metals & Hard Materials, 27, pp.130~139 (2009)
- C. Suryanarayana, , Prog. Mater. Sci, 46, pp.1~184 (2001)
- Z. Shen, , J. Am. Ceram. Soc, 85, pp.1921~1927 (2002)
- J. E. Garay, , Appl. Phys. Lett, 85, pp.573~577 (2004)
- J. R. Friedman, , Intermetallics, 12, pp.589~596 (2004)
- J. E. Garay, , Acta Mater, 51, pp.4487~4493 (2003)
- K. Niihara, , J. Mater. Sci. Lett, 1, pp.12~16 (1982)