Answer these questions 1 by 1 Experimental analysis of AA7475/ZrC/Al2O3 hybrid composites by taguchi method
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Metal-based composites, such as those used in the aerospace and automotive industries, are becoming increasingly popular dueto their intrinsic advantages like higher strength-to-weight ratios and less wear rates. An aluminium 7475 alloy based on MMCwas tested using the Taguchi design of the experiment. The major goal is to use the Taguchi method to anticipate the bestparameters for castings with the highest tensile strength and hardness. Good quality castings can only be made with precisecontrol of the process parameters. Stir casting was employed to make test samples with varying reinforcement weightpercentages, stirring speeds, and processing temperatures. Analytical variance and orthogonal arrays were used to explore theinfluence of process factors on the desired attributes. The Taguchi method was used to identify the best settings for maximizingthe mechanical characteristics of composites. The fundamental objective of this investigation is to find how various parameterscan be altered to produce defect-free castings with the necessary tensile strength and hardness for certain applications. TheTaguchi optimization method was demonstrated by conducting a test at the optimal level of processing parameters.
Abstract
Metal-based composites, such as those used in the aerospace and automotive industries, are becoming increasingly popular dueto their intrinsic advantages like higher strength-to-weight ratios and less wear rates. An aluminium 7475 alloy based on MMCwas tested using the Taguchi design of the experiment. The major goal is to use the Taguchi method to anticipate the bestparameters for castings with the highest tensile strength and hardness. Good quality castings can only be made with precisecontrol of the process parameters. Stir casting was employed to make test samples with varying reinforcement weightpercentages, stirring speeds, and processing temperatures. Analytical variance and orthogonal arrays were used to explore theinfluence of process factors on the desired attributes. The Taguchi method was used to identify the best settings for maximizingthe mechanical characteristics of composites. The fundamental objective of this investigation is to find how various parameterscan be altered to produce defect-free castings with the necessary tensile strength and hardness for certain applications. TheTaguchi optimization method was demonstrated by conducting a test at the optimal level of processing parameters.
참고문헌 (34)
- V. Mohanavel, , Mater. Res. Express, 6(10), pp.106557~ (2019)
- V. Mohanavel, , Mater. Testing, 61(6), pp.554~558 (2019)
- D. Srinivasan, , J. of Nanomater, 2022, pp.12~ (2022)
- K. Velavan, , Silicon, 13(10), pp.3639~3647 (2021)
- B. N. Sharath, , Tribologia, 38(1-2), pp.35~46 (2021)
- K. Raja, , Arab. J. Sci. Eng, 45, pp.9481~9495 (2020)
- T. Sathish, , J. Mater. Res. Technol, 14, pp.1494~1503 (2021)
- M. Hülya Kaftelen, , Mater. Sci. Eng, 527(21-22), pp.5930~5938 (2010)
- T. Wang, , J. Mater. Res. Technol, 13, pp.1615~1627 (2021)
- J. Jung, , J. Alloys Compd, pp.862~ (2021)
- T. Arunkumar, "Influence of Nanoparticles Reinforcements on Aluminium 6061 Alloys Fabricated via Novel Ultrasonic Aided Rheo-Squeeze Casting Method", Metals and Materials International, 28(1), pp.145~154 (2022), 대한금속·재료학회[DOI]
- R. Chandel, , Emergent Mater, 4(5), pp.1243~1257 (2021)
- F. Zok, , Metall Mater. Trans, 22, pp.2107~2117 (1991)
- M. D. Habibur Rahman, , Procedia Eng, 90, pp.103~109 (2014)
- J. P. Chen, , Adv. Manuf, 8, pp.279~315 (2020)
- R. Manjunath, , J. Bio- Tribo-Corrosion, 7(3) (2021)
- A. Kareem, , Mater, 14(1), pp.1~22 (2021)
- A. Haiter Lenin, , Surfaces and Interfaces, 10, pp.149~161 (2018)
- C. T. Guerrero, , Mater. Res, 25 (2022)
- V. Vignesh Kumar, , J. Braz. Soc. Mech. Sci. Eng, 41, pp.228~ (2019)
- A. Kareem, , Mater, 14(1), pp.175~ (2021)
- K. K. S. Himanshu Kala, , Procedia Mater. Sci, 6, pp.1951~1960 (2014)
- C. Ramesh Kumar, , Metall. Res. Technol, 118(6), pp.614~ (2021)
- T. S. Sachit, , Mater. Today : Proc, 43, pp.2909~2914 (2021)
- C. Kar, , Mater. Res. Innov, 25(2), pp.67~75 (2021)
- L. Natrayan, , Mater. Today Commun, 25 (2020)
- C. Kishore Reddy, , Int. J. Mech. Prod. Eng. Res. Dev, 10(2), pp.505~514 (2020)
- B. Supriya Maharana, , Int. J. of Coal Preparation Utilization, 41(8), pp.539~553 (2021)
- N. Puneeth, , Mater. Res. Express, 6(10) (2019)
- K. E. Aslani, , SN Appl. Sci, 2, pp.1016~ (2020)
- P. Pugalenthi, , Mater. Tehnol, 53(1), pp.49~55 (2019)
- M. Ravikumar, , Mater. Today : Proc, 5(10), pp.22447~22453 (2018)
- B. NagarajaGanesh, , J. Natural Fibers, 20, pp.1~11 (2023)
- B. Balasubramanian, , Natural Prod. Res, 24, pp.1~0 (2022)