본문 바로가기
KERD
논문KCI 등재

pH, Ion Release Capability, and Solubility Value of Premixed Mineral Trioxide Aggregates

2

조회

0

다운로드

4

인용

0

참고문헌

키워드

주제분류치의학

초록

The current study aimed to compare the pH, solubility value, and ion release capability of premixed mineral trioxide aggregates (MTAs) versus conventional pulp capping materials before and after setting. The following materials were used: resin-modified calcium silicate cement (TheraCal LC®, TLC), resin-modified calcium hydroxide cement (Ultra-BlendTM plus, UBP), and 2 kinds of premixed MTA (Endocem MTA® premixed regular〔 EMPR〕 and Well-RootTM PT〔 WRP〕). The specimens of each material were prepared before and after setting and were immersed in distilled water. The materials’ pH and solubility value were assessed. Next, three kinds of ion (calcium, sulfide, and strontium) released by pulp capping materials were evaluated via inductively coupled plasma atomic emission spectrometry. In the after-setting group, the pH of TLC and UBP decreased. However, the pH of the premixed MTAs increased with time. TLC released a higher concentration of strontium ion compared with the other materials. Meanwhile, EMPR released a significantly high concentration of sulfide ion (p < 0.05). In the after-setting group, the 2 kinds of premixed MTAs released a significantly higher concentration of calcium ion compared with the other materials (p < 0.05). In the after-setting group, EMPR had a significantly low solubility value (p < 0.05). The Kruskal-Wallis test, followed by the Mann-Whitney U test with Bonferroni correction, was used in statistical analysis. In conclusion, resin-modified calcium silicate cement, modified calcium hydroxide cement, and the 2 kinds of premixed MTAs had an alkaline pH and low solubility value and they released various concentrations of ions after setting.

Abstract

The current study aimed to compare the pH, solubility value, and ion release capability of premixed mineral trioxide aggregates (MTAs) versus conventional pulp capping materials before and after setting. The following materials were used: resin-modified calcium silicate cement (TheraCal LC®, TLC), resin-modified calcium hydroxide cement (Ultra-BlendTM plus, UBP), and 2 kinds of premixed MTA (Endocem MTA® premixed regular〔 EMPR〕 and Well-RootTM PT〔 WRP〕). The specimens of each material were prepared before and after setting and were immersed in distilled water. The materials’ pH and solubility value were assessed. Next, three kinds of ion (calcium, sulfide, and strontium) released by pulp capping materials were evaluated via inductively coupled plasma atomic emission spectrometry. In the after-setting group, the pH of TLC and UBP decreased. However, the pH of the premixed MTAs increased with time. TLC released a higher concentration of strontium ion compared with the other materials. Meanwhile, EMPR released a significantly high concentration of sulfide ion (p < 0.05). In the after-setting group, the 2 kinds of premixed MTAs released a significantly higher concentration of calcium ion compared with the other materials (p < 0.05). In the after-setting group, EMPR had a significantly low solubility value (p < 0.05). The Kruskal-Wallis test, followed by the Mann-Whitney U test with Bonferroni correction, was used in statistical analysis. In conclusion, resin-modified calcium silicate cement, modified calcium hydroxide cement, and the 2 kinds of premixed MTAs had an alkaline pH and low solubility value and they released various concentrations of ions after setting.

참고문헌 (57)

  1. Stanley HR, "Pulp capping : conserving the dental pulp-can it be done? Is it worth it?", Oral Surg Oral Med Oral Pathol, 68, pp.628~639 (1989)
  2. Dammaschke T, "Current recommendations for vital pulp treatment", Dtsch Zahnärztl Z Int, 1, pp.43~52 (2019)
  3. Dammaschke T, "The history of direct pulp capping", J Hist Dent, 56, pp.9~23 (2008)
  4. Hørsted-Bindslev P, "Treatment outcome of vital pulp treatment", Endod Topics, 2, pp.24~34 (2002)
  5. Desai S, "Calcium hydroxide-based root canal sealers : a review", J Endod, 35, pp.475~480 (2009)
  6. Mohammadi Z, "Properties and applications of calcium hydroxide in endodontics and dental traumatology", Int Endod J, 44, pp.697~730 (2011)
  7. Komabayashi T, "Current status of direct pulp-capping materials for permanent teeth", Dent Mater J, 35, pp.1~12 (2016)
  8. Parirokh M, "Mineral trioxide aggregate : a comprehensive literature review-part III : clinical applications, drawbacks, and mechanism of action", J Endod, 36, pp.400~413 (2010)
  9. Vivan RR, "Evaluation of the physical and chemical properties of two commercial and three experimental root-end filling materials", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 110, pp.250~256 (2010)
  10. Torabinejad M, "Histologic assessment of mineral trioxide aggregate as a root-end filling in monkeys", J Endod, 23, pp.225~228 (1997)
  11. Torabinejad M, "Mineral trioxide aggregate : a comprehensive literature review-part II : leakage and biocompatibility investigations", J Endod, 36, pp.190~202 (2010)
  12. Xu HHK, "Premixed calcium phosphate cements : synthesis, physical properties, and cell cytotoxicity", Dent Mater, 23, pp.433~441 (2007)
  13. Carey LE, "Premixed rapid-setting calcium phosphate composites for bone repair", Biomaterials, 26, pp.5002~5014 (2005)
  14. Wu M, "Premixed tricalcium silicate", sodium phosphate dibasic cements for root canal filling, 2021, pp.257, 123682~
  15. Takagi S, "Premixed calcium-phosphate cement pastes", J Biomed Mater Res B Appl Biomater, 67, pp.689~696 (2003)
  16. Han L, "Evaluation of calcium-releasing and apatite-forming abilities of fast-setting calcium silicate-modified endodontic materials", Int Endod J, 48, pp.124~130 (2015)
  17. Ber BS, "Chemical modification of ProRoot MTA to improve handling characteristics and decrease setting time", J Endod, 33, pp.1231~1234 (2007)
  18. Abu-Nawareg M, "Modification of Portland Cement Properties using Glycerin", Int J Health Sci Res, 10, pp.168~178 (2020)
  19. Nazari A, "The effects of ZrO2 nanoparticles on physical and mechanical properties of high strength self compacting concrete", Mater Res, 13, pp.551~556 (2010)
  20. Giachetti L, "Translucent fiber post cementation using a light-curing adhesive", composite system : SEM analysis and pull-out test, 2004, pp.32, 629~634
  21. Prasad M, "Effect of moisture, saliva, and blood contamination on the shear bond strength of brackets bonded with a conventional bonding system and self-etched bonding system", J Nat Sci Biol Med, 5, pp.123~129 (2014)
  22. Moharamzadeh K, "Cytotoxicity of resin monomers on human gingival fibroblasts and HaCaT keratinocytes", Dent Mater, 23, pp.40~44 (2007)
  23. Goon AT, "Contact allergy to(meth)acrylates in the dental series in southern Sweden : simultaneous positive patch test reaction patterns and possible screening allergens", Contact Dermatitis, 55, pp.219~226 (2006)
  24. Lee MJ, "Cytotoxicity of light-cured dental materials according to different sample preparation methods", Materials(Basel), 10, pp.288~ (2017)
  25. Shortall AC, "Light curing unit effectiveness assessed by dental radiometers", J Dent, 23, pp.227~232 (1995)
  26. Hamdy M, "Physical properties of different Pulp Capping Materials and Histological Analysis of their effect on Dogs’Dental Pulp Tissue Healing", Egypt Dent J, 64, pp.2657~2667 (2018)
  27. Hirose Y, "Effects of extracellular pH on dental pulp cells in vitro", J Endod, 42, pp.735~741 (2016)
  28. Lucas CA, "Intracellular acidification inhibits the proliferative response in BALB", c-3T3 cells, 1988, pp.136, 161~167
  29. Mizuno M, "Calcium ion release from calcium hydroxide stimulated fibronectin gene expression in dental pulp cells and the differentiation of dental pulp cells to mineralized tissue forming cells by fibronectin", Int Endod J, 41, pp.933~938 (2008)
  30. Rashid F, "The effect of extracellular calcium ion on gene expression of bone-related proteins in human pulp cells", J Endod, 29, pp.104~107 (2003)
  31. Poggio C, "Solubility and pH of direct pulp capping materials : a comparative study", J Appl Biomater Func Mater, 13, pp.E181~E185 (2015)
  32. El-Fiqi A, "Collagen hydrogels incorporated with surface-aminated mesoporous nanobioactive glass : improvement of physicochemical stability and mechanical properties is effective for hard tissue engineering", Acta Miomater, 9, pp.9508~9521 (2013)
  33. "ISO 6876:2012 Dentistry - Root canal sealing materials"[URL]
  34. Bae WJ, "Odontogenic responses of human dental pulp cells to collagen", nanobioactive glass nanocomposites, 2012, pp.28, 1271~1279
  35. Jun SK, "The biomineralization of a bioactive glass-incorporated light-curable pulp capping material using human dental pulp stem cells", Biomed Res Int, 2017, pp.2495282~ (2017)
  36. Narita H, "An explanation of the mineralization mechanism in osteoblasts induced by calcium hydroxide", Acta Biomater, 6, pp.586~590 (2010)
  37. Cooper PR, "Inflammation-regeneration interplay in the dentine-pulp complex", J Dent, 38, pp.687~697 (2010)
  38. GandolfiMG, "In vitro screening of the apatite-forming ability, biointeractivity and physical properties of a tricalcium silicate material for endodontics and restorative dentistry", Dent J, 1, pp.41~60 (2013)
  39. Santos AD, "Physico-chemical properties of MTA and a novel experimental cement", Int Endod J, 38, pp.443~447 (2005)
  40. 강태윤, "세 가지 용액에 의한 기혼합형 MTA의 기계 및 물리·화학적 특성 연구", 대한치과재료학회지, 48(4), pp.281~292 (2021), 대한치과재료학회
  41. GandolfiMG, "Chemical-physical properties of TheraCal, a novel light-curable MTA-like material for pulp capping", Int Endod J, 45, pp.571~579 (2012)
  42. Khalil I, "Investigation of a novel mechanically mixed mineral trioxide aggregate(MM-MTA™)", Int Endod J, 48, pp.757~767 (2015)
  43. Margunato S, "In vitro evaluation of ProRoot MTA, Biodentine, and MM-MTA on human alveolar bone marrow stem cells in terms of biocompatibility and mineralization", J Endod, 41, pp.1646~1652 (2015)
  44. Damas BA, "Cytotoxicity comparison of mineral trioxide aggregates and EndoSequence bioceramic root repair materials", J Endod, 37, pp.372~375 (2011)
  45. Lovato KF, "Antibacterial activity of endosequence root repair material and proroot MTA against clinical isolates of Enterococcus faecalis", J Endod, 37, pp.1542~1546 (2011)
  46. Estrela C, "Mechanism of the action of calcium and hydroxy ions of calcium hydroxide on tissue and bacteria", Braz Dent J, 6, pp.85~90 (1995)
  47. Luczaj-Cepowicz E, "Evaluation of cytotoxicity and pH changes generated by various dental pulp capping materials-an in vitro study", Folia Histochem Cytobiol, 55, pp.86~93 (2017)
  48. GandolfiMG, "Biointeractivity-related versus chemi", physisorption-related apatite precursor-forming ability of current root end filling materials, 2013, pp.101, 1107~1123
  49. Duarte MAH, "pH and calcium ion release of 2 root-end filling materials", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 95, pp.345~347 (2003)
  50. Yamamoto S, "Evaluation of the Ca ion release, pH and surface apatite formation of a prototype tricalcium silicate cement", Int Endod J, 50(Suppl 2), pp.E73~E82 (2017)
  51. Weld JT, "The antibacterial properties of sulfur", J Exp Med, 85, pp.531~542 (1947)
  52. Choudhury SR, "Polyethylene glycol-stabilized sulphur nanoparticles : an effective antimicrobial agent against multidrug-resistant bacteria", J Antimicrob Chemother, 67, pp.1134~1137 (2012)
  53. Canalis E, "The divalent strontium salt S12911 enhances bone cell replication and bone formation in vitro", Bone, 18, pp.517~523 (1996)
  54. Buehler J, "Strontium ranelate inhibits bone resorption while maintaining bone formation in alveolar bone in monkeys(Macaca fascicularis)", Bone, 29, pp.176~179 (2001)
  55. Schröder U, "Effects of calcium hydroxide-containing pulp-capping agents on pulp cell migration, proliferation, and differentiation", J Dent Res, 64, pp.541~548 (1985)
  56. Choi Y, "Biological effects and washout resistance of a newly developed fast-setting pozzolan cement", J Endod, 39, pp.467~472 (2013)
  57. Nekoofar MH, "The effect of condensation pressure on selected physical properties of mineral trioxide aggregate", Int Endod J, 40, pp.453~461 (2007)

관련 논문AI추천

Comparative Analysis of the Physical and Biochemical Properties of Light-cure Resin-modified Pulp Capping Materials김유진, 김종빈, 김종수, 김태겸, 박재희, 신지선, 이준행, 한미란대한소아치과학회 · 대한소아치과학회지2024 · 제51권 제2호Evaluation of Setting Time, Solubility, and Compressive Strength of Four Calcium Silicate-Based Cements김유진, 김종빈, 김종수, 신지선, 이정환, 이준행, 장유지, 한미란대한소아치과학회 · 대한소아치과학회지2023 · 제50권 제2호Mineralization-inducing potentials of calcium silicate-based pulp capping materials in human dental pulp cellsSohee Kang영남대학교 의과대학 · Journal of Yeungnam Medical Science2020 · 제37권 제3호Comparative analysis of physicochemical properties of root perforation sealer materialsAlvaro Henrique Borges, Fábio Luis Miranda Pedro, Matheus Coelho Bandeca, Maura Cristiane Gonçales Orçati Dorileo, Orlando Aguirre Guedes, Ricardo Dalla Villa대한치과보존학회 · Restorative Dentistry and Endodontics2014 · 제39권 제3호Effect of moisture and pH on setting time and microhardness of three premixed calcium silicate-based root canal sealers: an in vitro experimental studyKim Sooyoun대한치과보존학회 · Restorative Dentistry and Endodontics2025 · 제50권 제4호Effect of irrigants on the color stability, solubility, and surface characteristics of calcium-silicate based cementsAksel Hacer, Canay Şenay, Eren Selen Küçükkaya, Karasan Duygu, Örs Sevinc Askerbeyli대한치과보존학회 · Restorative Dentistry and Endodontics2022 · 제47권 제1호

이 간행물의 다른 논문 (13건)