Evaluation of Setting Time, Solubility, and Compressive Strength of Four Calcium Silicate-Based Cements
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This study aimed to compare the physical properties of 4 kinds of calcium silicatebased cements (CSCs): 2 kinds of powder-liquid mix type (RetroMTA® [RTMX] and Endocem® MTA Zr [EZMX]) and 2 kinds of premixed type (Well-Root™PT [WRPR] and Endocem® MTA premixed [ECPR]) CSCs, respectively. Further, we assessed the setting times, solubility values, and compressive strengths of the cements. The shortest setting time was observed for EZMX (123.33 ± 5.77 seconds), followed by RTMX (146.67 ± 5.77 seconds), ECPR (260.00 ± 17.32 seconds), and WRPR (460.00 ± 17.32 seconds), respectively. The highest solubility was observed for WRPR (9.01 ± 0.55%), followed by RTMX (2.17 ± 0.07%), EZMX (0.55 ± 0.03%), and ECPR (0.17 ± 0.03%). Furthermore, the highest compressive strength was observed for ECPR (76.67 ± 25.67 Mpa), followed by WRPR (38.39 ± 7.25 Mpa), RTMX (35.07 ± 5.34 Mpa), and EZMX (4.07 ± 0.60 Mpa). In conclusion, the premixed type CSCs (WRPR and ECPR) exhibited longer setting times compared to the powder-liquid mix type CSCs (EZMX and RTMX). The solubility test showed that ECPR had the lowest solubility while WRPR had the highest solubility, with a statistically significant difference between them (p < 0.0083). Additionally, the compressive strength test showed that ECPR had the highest compressive strength, while EZMX had the lowest compressive strength, also with a statistically significant difference between them (p < 0.0083). ECPR is a promising material as it is premixed, eliminating the need for mixing time, and it has also demonstrated improved solubility and compressive strength, making it a potentially favorable option for clinical use.
Abstract
This study aimed to compare the physical properties of 4 kinds of calcium silicatebased cements (CSCs): 2 kinds of powder-liquid mix type (RetroMTA® [RTMX] and Endocem® MTA Zr [EZMX]) and 2 kinds of premixed type (Well-Root™PT [WRPR] and Endocem® MTA premixed [ECPR]) CSCs, respectively. Further, we assessed the setting times, solubility values, and compressive strengths of the cements. The shortest setting time was observed for EZMX (123.33 ± 5.77 seconds), followed by RTMX (146.67 ± 5.77 seconds), ECPR (260.00 ± 17.32 seconds), and WRPR (460.00 ± 17.32 seconds), respectively. The highest solubility was observed for WRPR (9.01 ± 0.55%), followed by RTMX (2.17 ± 0.07%), EZMX (0.55 ± 0.03%), and ECPR (0.17 ± 0.03%). Furthermore, the highest compressive strength was observed for ECPR (76.67 ± 25.67 Mpa), followed by WRPR (38.39 ± 7.25 Mpa), RTMX (35.07 ± 5.34 Mpa), and EZMX (4.07 ± 0.60 Mpa). In conclusion, the premixed type CSCs (WRPR and ECPR) exhibited longer setting times compared to the powder-liquid mix type CSCs (EZMX and RTMX). The solubility test showed that ECPR had the lowest solubility while WRPR had the highest solubility, with a statistically significant difference between them (p < 0.0083). Additionally, the compressive strength test showed that ECPR had the highest compressive strength, while EZMX had the lowest compressive strength, also with a statistically significant difference between them (p < 0.0083). ECPR is a promising material as it is premixed, eliminating the need for mixing time, and it has also demonstrated improved solubility and compressive strength, making it a potentially favorable option for clinical use.
참고문헌 (59)
- Rodd HD, "Pulp therapy for primary molars", Int J Paediatr Dent, 16(Suppl 1), pp.15~23 (2006)
- Gizani S, "Vital pulp therapy in primary teeth with deep caries : an umbrella review", Pediatr Dent, 43, pp.426~437 (2021)
- Fuks AB, "Vital pulp therapy with new materials for primary teeth : new directions and treatment perspectives", J Endod, 34(7 Suppl), pp.S18~S24 (2008)
- Sahin N, "Clinical, radiographic, and histological evaluation of three different pulp-capping materials in indirect pulp treatment of primary teeth : a randomized clinical trial", Clin Oral Investig, 25, pp.3945~3955 (2021)
- Parirokh M, "Mineral trioxide aggregate : a comprehensive literature review-Part III : Clinical applications, drawbacks, and mechanism of action", J Endod, 36, pp.400~413 (2010)
- Hilton TJ, "Comparison of CaOH with MTA for direct pulp capping : a PBRN randomized clinical trial", J Dent Res, 92(7 Suppl), pp.S16~S22 (2013)
- American Academy of Pediatric Dentistry, "Guideline on pulp therapy for primary and young permanent teeth", Pediatr Dent, 26(7 Suppl), pp.115~119 (2004)
- Koike T, "Induction of reparative dentin formation on exposed dental pulp by dentin phosphophoryn", collagen composite, 2014, pp.2014, 745139~
- Horsted P, "A retrospective study of direct pulp capping with calcium hydroxide compounds", Endod Dent Traumatol, 1, pp.29~34 (1985)
- Saidon J, "Cell and tissue reactions to mineral trioxide aggregate and Portland cement", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 95, pp.483~489 (2003)
- Torabinejad M, "Physical and chemical properties of a new root-end filling material", J Endod, 21, pp.349~353 (1995)
- 윤지혜, "Cytotoxicity of Various Calcium Silicate-based Materials with Stem Cells from Deciduous Teeth", 대한소아치과학회지, 46(1), pp.85~92 (2019), 대한소아치과학회[DOI]
- 권영대, "연고형 Mineral Trioxide Aggregates (MTA)와 분말-용액 혼합형 MTA의 골내 이식시험 비교 연구", 대한치과재료학회지, 44(3), pp.229~246 (2017), 대한치과재료학회[DOI]
- Motwani N, "Premixed bioceramics : A novel pulp capping agent", J Conserv Dent, 24, pp.124~129 (2021)
- 차경령, "Comparison of Setting Time, Compressive Strength, Solubility, and pH of Four Kinds of MTA", 대한치과재료학회지, 43(1), pp.61~72 (2016), 대한치과재료학회[DOI]
- Kogan P, "The effects of various additives on setting properties of MTA", J Endod, 32, pp.569~572 (2006)
- 정유나, "Physical and chemical properties of experimental mixture of mineral trioxide aggregate and glass ionomer cement", Restorative Dentistry and Endodontics, 35(5), pp.344~352 (2010), 대한치과보존학회
- Lee BN, "Improvement of the properties of mineral trioxide aggregate by mixing with hydration accelerators", J Endod, 37, pp.1433~1436 (2011)
- Abdalla MM, "A novel, doped calcium silicate bioceramic synthesized by sol-gel method : Investigation of setting time and biological properties", J Biomed Mater Res B Appl Biomater, 108, pp.56~66 (2020)
- Saghiri MA, "Calcium silicate-based cements and functional impacts of various constituents", Dent Mater J, 36, pp.8~18 (2017)
- 백설아, "pH, Ion Release Capability, and Solubility Value of Premixed Mineral Trioxide Aggregates", 대한소아치과학회지, 49(4), pp.379~391 (2022), 대한소아치과학회
- Miled MB, "Interest of Biodentine as pulp-capping materiel under CAD", CAM Ceramic Inlay, 2021, pp.9, 207~210
- International Organization for Standardization, "ISO-6876: Dental Root Canal Sealing Materials", ~ (2001)
- International Organization for Standardization, "ISO 9917-1: Dentistry-Water-based cements-Part 1: Powder", liquid acid-base cements, 2007
- 권영대, "연고형 mineral trioxide aggregates (MTA)와 분말-용액 혼합형 MTA의 물성 비교 연구", 대한치과재료학회지, 44(1), pp.11~20 (2017), 대한치과재료학회[DOI]
- Salem Milani A, "Effect of Different Mixing Methods on Physicochemical Properties of Mineral Trioxide Aggregate : A Systematic Review", Int J Dent, 2023, pp.5226095~ (2023)
- Ber BS, "Chemical modification of ProRoot MTA to improve handling characteristics and decrease setting time", J Endod, 33, pp.1231~1234 (2007)
- Kang TY, "Physical, chemical, mechanical, and biological properties of four different commercial root-end filling materials : a comparative study", Materials, 14, pp.1693~ (2021)
- Ha WN, "D90 : the strongest contributor to setting time in mineral trioxide aggregate and Portland cement", J Endod, 41, pp.1146~1150 (2015)
- Setbon HM, "Influence of composition on setting kinetics of new injectable and", or fast setting tricalcium silicate cements, 2014, pp.30, 1291~1303
- Köseoğlu S, "Biological response of commercially available different tricalcium silicate-based cements and pozzolan cement", Microsc Res Tech, 80, pp.994~999 (2017)
- Camilleri J, "Mineral Trioxide Aggregate in Dentistry", pp.132~133 (2016), Charmyun
- Kang EH, "Synthesis and hydration behavior of calcium zirconium aluminate(Ca7ZrAl6O18)cement", Cement Concrete Res, 56, pp.106~111 (2014)
- Kang SH, "Color changes of teeth after treatment with various mineral trioxide aggregate-based materials : an ex vivo study", J Endod, 41, pp.737~741 (2015)
- 박윤정, "Effect of compositional variation of dental MTA cements on setting time", 대한치과재료학회지, 48(2), pp.99~118 (2021), 대한치과재료학회
- Natu VP, "Bioactivity, physical and chemical properties of MTA mixed with propylene glycol", J Appl Oral Sci, 23, pp.405~411 (2015)
- Baba T, "Examination of calcium silicate cements with low-viscosity methyl cellulose or hydroxypropyl cellulose additive", Biomed Res Int, 2016, pp.4583854~ (2016)
- Kwon SH, "Effects of Various Mineral Trioxide Aggregates on Viability and Mineralization Potential of 3-Dimensional Cultured Dental Pulp Stem Cells", Appl Sci, 11, pp.11381~ (2021)
- Shabahang S, "Treatment of teeth with open apices using mineral trioxide aggregate", Pract Periodontics Aesthet Dent, 12, pp.315~320 (2000)
- Mente J, "Mineral trioxide aggregate or calcium hydroxide direct pulp capping : an analysis of the clinical treatment outcome", J Endod, 36, pp.806~813 (2010)
- Koubi G, "Clinical evaluation of the performance and safety of a new dentine substitute, Biodentine, in the restoration of posterior teeth-a prospective study", Clin Oral Investig, 17, pp.243~249 (2013)
- 고현정, "MTA의 Myths & Facts", 대한치과의사협회지, 48(11), pp.813~818 (2010), 대한치과의사협회[DOI]
- 이상진, "치근단 역충전용 포틀랜드 시멘트 신복합재료의 물리적 성질 고찰", Restorative Dentistry and Endodontics, 35(6), pp.445~454 (2010), 대한치과보존학회
- Gandolfi MG, "Chemical-physical properties of TheraCal, a novel light-curable MTA-like material for pulp capping", Int Endod J, 45, pp.571~579 (2012)
- Desai S, "Calcium hydroxide-based root canal sealers : a review", J Endod, 35, pp.475~480 (2009)
- Shahi S, "The Effect of Different Mixing Methods on the pH and Solubility of Mineral Trioxide Aggregate and Calcium-Enriched Mixture", Iran Endod J, 10, pp.140~143 (2015)
- Vaddi HK, "Oxide terpenes as human skin penetration enhancers of haloperidol from ethanol and propylene glycol and their modes of action on stratum corneum", Biol Pharm Bull, 26, pp.220~228 (2003)
- Ashi T, "Physicochemical and Antibacterial Properties of Bioactive Retrograde Filling Materials", Bioengineering, 9, pp.624~ (2022)
- Colombo M, "Biological and physico-chemical properties of new root canal sealers", J Clin Exp Dent, 10, pp.E120~E126 (2018)
- Marciano MA, "Calcium silicate-based sealers : assessment of physicochemical properties, porosity and hydration", Dent Mater, 32, pp.E30~E40 (2016)
- Han L, "Evaluation of calcium-releasing and apatite-forming abilities of fast-setting calcium silicate-based endodontic materials", Int Endod J, 48, pp.124~130 (2015)
- 강태윤, "세 가지 용액에 의한 기혼합형 MTA의 기계 및 물리·화학적 특성 연구", 대한치과재료학회지, 48(4), pp.281~292 (2021), 대한치과재료학회
- Choi Y, "Biological effects and washout resistance of a newly developed fast-setting pozzolan cement", J Endod, 39, pp.467~472 (2013)
- Fathi U, "Strength Evaluation of Different Dental Pulp Capping Materials", J Global Sci Res, 7, pp.2464~2467 (2022)
- Al-Sherbiny IM, "Chemico-physical and mechanical evaluation of three calcium silicate-based pulp capping materials", Saudi Dent J, 33, pp.207~214 (2021)
- 장은영, "Comparison of Microleakage and Compressive Strength of Different Base Materials", 대한소아치과학회지, 48(2), pp.168~175 (2021), 대한소아치과학회
- Kayahan MB, "Effect of acid etching procedures on the compressive strength of 4calcium silicate-based endodontic cements", J Endod, 39, pp.1646~1648 (2013)
- "Increasing use of bioceramics in endodontics:A narrative review"[URL]
- Dawood AE, "Calcium silicate-based cements : composition, properties, and clinical applications", J Investig Clin Dent, 8, pp.E12195~ (2017)
