공개용과 상업용 DICOM STL 파일변환 프로그램으로 출력한 삼차원 프린팅 쇄골 골절 모델의 품질비교
Comparison of the Quality of Clavicle Fracture Three-dimensional Model Printing by Open Source and Commercial use Digital Imaging and Communications in Medicine Stereolithography File Conversion Program
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
The recent 3D printing technology is used in various medical, manufacturing, and education fields and is more efficient in terms of production process, time, and cost than existing production. Especially in fracture surgery, interest and research have been focused on improving accuracy, shortening of operation time and recovery time, and reducing reoperation. However, because of the financial and technical problems of the 3D printer and the file conversion program, the 3D printing is made directly at the hospital, and it is not generally used for diagnosis of fracture and surgical research. In this study, to solve those problems, clavicle CT imaging was switched into Osirix Open Source DICOM Viewer, Stereolithography file conversion programs and commercial Terarecon 3D DICOM Viewer, file conversion programs, and then clavicle fracture model was directly made through 3D printer of fused filament fabrication wire additive processing method, and then the accuracy of the shape was compared and analyzed. Clavicle fracture models printed in two methods were blind-tested on clinicians of general hospitals' orthopedics and radiologic technicians with over 10 years of experiences, and then their analysis opinions of resolution reviews were analyzed. The result showed no difference. The 3D printing model with open source DICOM STL file conversion program used was applicable to clinical, so it is considered useful in precision diagnosis of fracture and operation plans.
Abstract
The recent 3D printing technology is used in various medical, manufacturing, and education fields and is more efficient in terms of production process, time, and cost than existing production. Especially in fracture surgery, interest and research have been focused on improving accuracy, shortening of operation time and recovery time, and reducing reoperation. However, because of the financial and technical problems of the 3D printer and the file conversion program, the 3D printing is made directly at the hospital, and it is not generally used for diagnosis of fracture and surgical research. In this study, to solve those problems, clavicle CT imaging was switched into Osirix Open Source DICOM Viewer, Stereolithography file conversion programs and commercial Terarecon 3D DICOM Viewer, file conversion programs, and then clavicle fracture model was directly made through 3D printer of fused filament fabrication wire additive processing method, and then the accuracy of the shape was compared and analyzed. Clavicle fracture models printed in two methods were blind-tested on clinicians of general hospitals' orthopedics and radiologic technicians with over 10 years of experiences, and then their analysis opinions of resolution reviews were analyzed. The result showed no difference. The 3D printing model with open source DICOM STL file conversion program used was applicable to clinical, so it is considered useful in precision diagnosis of fracture and operation plans.
참고문헌 (17)
- Kulkarni P, "A review of process planning techniques in layered manufacturing", Rapid Prototyping Journal, 6(1), pp.18~35 (2000)[DOI]
- Brown GA, "Application of computer-generated stereolithography and interpositioning template in acetabular fracture a report of eight case", J Orthop Trauma, 16(5), pp.347~352 (2002)[DOI]
- 안동규, "역공학과 쾌속조형공정을 이용한 정형외과수술기법 개발에 관한 연구", 한국정밀공학회지, 21(6), pp.188~196 (2004), 한국정밀공학회
- Honiball JR, "The Application of 3D Printing in reconstructive surgery", pp.2010
- Sanghera B, "Preliminary study of rapid prototypes medical models", Rapid Prototyping Journal, 7(5), pp.275~284 (2001)[DOI]
- 손홍문, "쾌속조형공정 지원 정형외과 골절 수술 - 증례 보고 -", 대한정형외과학회지, 39(7), pp.845~ (2004), 대한정형외과학회
- Frame M, "Rapid Prototyping in Orthopaedic Surgery: A User's Guide", The Scientific World Journal, 2012 (2012)
- 오왕균, "CT 영상을 이용한 3D 프린팅으로 환자 맞춤형 대퇴골 첨삭가공", 한국방사선학회논문지, 7(5), pp.359~364 (2013), 한국방사선학회[DOI]
- 오왕균, "보급형 3D 프린터로 제작한 쇄골 골절 모델을 이용한 정형외과 수술에 대한 유용성과 활용가능성 평가", 방사선기술과학, 37(3), pp.203~209 (2014), 대한방사선과학회
- 오왕균, "FDM 방식의 3D 프린터를 이용한 골반 골절 환자의 맞춤형 모델제작", 한국콘텐츠학회 논문지, 14(11), pp.370~377 (2014), 한국콘텐츠학회[DOI]
- Kulshrestha V, "Operative versus nonoperative management of displaced midshaft clavicle fractures: a prospective cohort study", J. Orthopeadic Trauma, 25(1), pp.31~38 (2011)[DOI]
- Stocker NG, "Stereoligthographic models for surgical planning-preliminary report", J. Oral & Maxillofacial Surgery, 50(5), pp.446~471 (1992)
- Web PA, "A review of rapid prototyping (RP) techniques in the medical and biomedical sector", J. Medical Engineering & Technology, 24(4), pp.149~153 (2009)
- 김형균, "3차원 의료영상을 이용한 보청기 제작의 새로운 모델링 방법", 방사선기술과학, 39(2), pp.257~262 (2016), 대한방사선과학회[DOI]
- 오왕균, "의료 영상을 이용한 인체 골 모형 제작의 3차원 프린팅 시스템 개발", 방사선기술과학, 40(3), pp.433~441 (2017), 대한방사선과학회[DOI]
- 성열훈, "3D 프린터로 제작된 CT 팬톰을 이용한 물리적 관심영역과 설정 관심영역의 크기에 따른 하운스필드의 비교", 방사선기술과학, 38(4), pp.421~427 (2015), 대한방사선과학회[DOI]