Clinical Application of Solid Model Based on Trabecular Tibia Bone CT Images Created by 3D Printer
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objectives: The aim of this work is to use a 3D solid model to predict the mechanical loads of human bone fracture risk associated with bone disease conditions according to biomechanical engineering parameters. Methods: We used special image processing tools for image segmentation and three-dimensional (3D) reconstruction to generate meshes, which are necessary for the production of a solid model with a 3D printer from computed tomography (CT) images of the human tibia’s trabecular and cortical bones. We examined the defects of the mechanism for the tibia’s trabecular bones. Results: Image processing tools and segmentation techniques were used to analyze bone structures and produce a solid model with a 3D printer. Conclusions: These days, bio-imaging (CT and magnetic resonance imaging) devices are able to display and reconstruct 3D anatomical details, and diagnostics are becoming increasingly vital to the quality of patient treatment planning and clinical treatment. Furthermore, radiographic images are being used to study biomechanical systems with several aims, namely, to describe and simulate the mechanical behavior of certain anatomical systems, to analyze pathological bone conditions, to study tissues structure and properties, and to create a solid model using a 3D printer to support surgical planning and reduce experimental costs. These days, research using image processing tools and segmentation techniques to analyze bone structures to produce a solid model with a 3D printer is rapidly becoming very important.
Abstract
Objectives: The aim of this work is to use a 3D solid model to predict the mechanical loads of human bone fracture risk associated with bone disease conditions according to biomechanical engineering parameters. Methods: We used special image processing tools for image segmentation and three-dimensional (3D) reconstruction to generate meshes, which are necessary for the production of a solid model with a 3D printer from computed tomography (CT) images of the human tibia’s trabecular and cortical bones. We examined the defects of the mechanism for the tibia’s trabecular bones. Results: Image processing tools and segmentation techniques were used to analyze bone structures and produce a solid model with a 3D printer. Conclusions: These days, bio-imaging (CT and magnetic resonance imaging) devices are able to display and reconstruct 3D anatomical details, and diagnostics are becoming increasingly vital to the quality of patient treatment planning and clinical treatment. Furthermore, radiographic images are being used to study biomechanical systems with several aims, namely, to describe and simulate the mechanical behavior of certain anatomical systems, to analyze pathological bone conditions, to study tissues structure and properties, and to create a solid model using a 3D printer to support surgical planning and reduce experimental costs. These days, research using image processing tools and segmentation techniques to analyze bone structures to produce a solid model with a 3D printer is rapidly becoming very important.
참고문헌 (17)
- Mao K, "Clinical application of computer-designed polystyrene models in complex severe spinal deformities : a pilot study", Eur Spine J, 19(5), pp.797~802 (2010)
- Esses SJ, "Clinical applications of physical 3D models derived from MDCT data and created by rapid prototyping", AJR Am J Roentgenol, 196(6), pp.683~688 (2011)
- Butscher A, "Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing", Acta Biomater, 7(3), pp.907~920 (2011)
- Janssen I, "Low relative skeletal muscle mass(sarcopenia)in older persons is associated with functional impairment and physical disability", J Am Geriatr Soc, 50(5), pp.889~896 (2002)
- Scifert CF, "Finite element analysis of a novel design approach to resisting total hip dislocation", Clin Biomech(Bristol, Avon), 14(10), pp.697~703 (1999)
- Ventola CL, "Medical applications for 3D printing : current and projected uses", P T, 39(10), pp.704~711 (2014)
- Niebur GL, "High-resolution finite element models with tissue strength asymmetry accurately predict failure of trabecular bone", J Biomech, 33(12), pp.1575~1583 (2000)
- Peltola SM, "A review of rapid prototyping techniques for tissue engineering purposes", Ann Med, 40(4), pp.268~280 (2008)
- Mertz L, "Dream it, design it, print it in 3-D : what can 3-D printing do for you?", IEEE Pulse, 4(6), pp.15~21 (2013)
- Rengier F, "3D printing based on imaging data : review of medical applications", Int J Comput Assist Radiol Surg, 5(4), pp.335~341 (2010)
- Lee MY, "New layer-based imaging and rapid prototyping techniques for computer-aided design and manufacture of custom dental restoration", J Med Eng Technol, 32(1), pp.83~90 (2008)
- Harrysson OL, "Custom-designed orthopedic implants evaluated using finite element analysis of patient-specific computed tomography data : femoral-component case study", BMC Musculoskelet Disord, 8, pp.91~ (2007)
- Gross BC, "Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences", Anal Chem, 86(7), pp.3240~3253 (2014)
- "Micro 3-D printer creates tiny structures in seconds" (2013)[URL]
- "Artificial blood vessels created on a 3D printer" (2011)[URL]
- Ragaert K, "Design and thermoregulation of a new microextrusion dispense head for 3D‐plotting of thermally sensitive thermoplastics", Polym Eng Sci, 53(2), pp.273~282 (2013)
- Lee SJ, "3D printer technology changes future of the health industry", KHIDI Brief, 111, pp.1~16 (2014)