Multi-Phase Model Update for System Identification of PSC Girders under Various Prestress Forces
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This paper presents a multi-phase model update approach for system identification of prestressed concrete (PSC) girders under various prestress forces. First, a multi-phase model update approach designed on the basis of eigenvalue sensitivity concept is newly proposed. Next, the proposed multi-phase approach is evaluated from controlled experiments on a lab-scale PSC girder for which forced vibration tests are performed for a series of prestress forces. On the PSC girder, a few natural frequencies and mode shapes are experimentally measured for the various prestress forces. The corresponding modal parameters are numerically calculated from a three-dimensional finite element (FE) model which is established for the target PSC girder. Eigenvalue sensitivities are analyzed for potential model-updating parameters of the FE model. Then, structural subsystems are identified phase-by-phase using the proposed model update procedure. Based on model update results, the relationship between prestress forces and model-updating parameters is analyzed to evaluate the influence of prestress forces on structural subsystems.
Abstract
This paper presents a multi-phase model update approach for system identification of prestressed concrete (PSC) girders under various prestress forces. First, a multi-phase model update approach designed on the basis of eigenvalue sensitivity concept is newly proposed. Next, the proposed multi-phase approach is evaluated from controlled experiments on a lab-scale PSC girder for which forced vibration tests are performed for a series of prestress forces. On the PSC girder, a few natural frequencies and mode shapes are experimentally measured for the various prestress forces. The corresponding modal parameters are numerically calculated from a three-dimensional finite element (FE) model which is established for the target PSC girder. Eigenvalue sensitivities are analyzed for potential model-updating parameters of the FE model. Then, structural subsystems are identified phase-by-phase using the proposed model update procedure. Based on model update results, the relationship between prestress forces and model-updating parameters is analyzed to evaluate the influence of prestress forces on structural subsystems.
참고문헌 (24)
- Adam, R.D, "A Vibration Technique for Non-Destructively Assessing the Integrity of Structures", Journal of Mechanical Engineering Science, 20, pp.93~100 (1978)
- Brincker, R, "Modal Identification of Output-Only Systems using Frequency Domain Decomposition", Smart Materials and Structures, 10, pp.441~445 (2001)
- Brownjohn, J.M.W, "Civil Structure Condition Assessment by FE Mode Lupdating: Methodology and Case Studies", Finite Elements in Analysis and Design, 37, pp.761~775 (2001)
- Collins, M.P, "Prestressed Concrete Structures" (1991), Prentice Hall
- Computers and Structures Inc, "CSI Analysis Reference Manual for SAP2000", Berkeley, ~ (2005)
- Friswell, M.I, "Finite Element Model Updating in Structural Dynamics" (1995), Kluwer Academic
- Jaishi, B, "Structural Finite Element Model Updating using Ambient Vibration test Results", Journal of Structural Engineering, 131(4), pp.617~628 (2005)
- Kim, J.T, "Model-Uncertainty Impact and Damage-Detection Accuracy in Plate Girder", Journal of Structural Engineering, 121(10), pp.1409~1417 (1995)
- Kim, J.T, "Smart Baseline Model for Nondestructive Evaluation of Highway Bridges", Proceeding of SPIE International Symposium, Smart Systems for Bridges, Structures, and Highways (1997)
- J.T. Kim, "Identification of prestress-loss in PSC beams using modal information", Structural Engineering and Mechanics, An Int＇l Journal, 17(3-4), pp.467~482 (2004), 국제구조공학회
- Kwon, K.S, "Frequency Selection Method for FRF-based Model Updating", Journal of Sound and Vibration, 278, pp.285~306 (2004)
- Law, S.S, "Time Domain Response of a Prestressed Beam and Prestress Identification", Journal of Sound and Vibration, 288(4), pp.1011~1025 (2005)
- Miyamoto, A, "Behavior of Prestressed beam Strengthened with External Tendons", Journal of Structural Engineering, 126, pp.1033~1044 (2000)
- Nawy, E.G, "Prestressed concrete-A Fundamental Approach" (1996), PrenticeHall
- Saiidi, M, "Prestress Force Effect on Vibration Frequency of Concrete Bridges", Journal of Structural Engineering, 120, pp.2233~2241 (1994)
- Stubbs, N, "Damage Localization in Structures Without Baseline Modal Parameters", AIAA Journal, 34(8), pp.1644~1649 (1996)
- Stubbs, N, "Global Non-Destructive Damage Evaluation in Solids", The International Journal of Analytical and Experimental Modal Analysis, 5(2), pp.67~79 (1990)
- The MathWorks Inc, "MATLAB_(R) The Language of Technical Computing", ~ (2004)
- Wu, J.R, "Finite Element Model Updating for a High-Rise Structure Based on Ambient Vibration Measurements", Engineering Structures, 26, pp.979~990 (2004)
- Yang, Y.B, "A New Direct Method for Updating Structural Models Based on Measured Modal Data", Engineering Structures, 31, pp.32~42 (2009)
- Jin-Hak Yi, "Comparative study on modal identification methods using output-only information", Structural Engineering and Mechanics, An Int＇l Journal, 17(3-4), pp.445~466 (2004), 국제구조공학회
- Zhang, Q.W, "Finite Element Model Updating for Structures with Parametric Constraints", Earthquake Engineering and Structural Dynamics, 29, pp.927~944 (2000)
- Zhang, Q.W, "Finite Element Model Updating for the Kap Shui Mun Cable-Stayed Bridge", Journal of Bridge Engineering, 6(4), pp.285~293 (2001)