결합제 분사 방식 3D 프린팅 기술을 활용한 소아 생식기 차폐체 제작 및 유용성 평가
Production and Utility Assessment of Pediatric Genital Shields Using 3D Printing Technology with Colorjet 3D Printing
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, the aim was to assess the shielding performance of different 3D printing materials, specifically those produced using FDM, SLA, and CJP methods, with a focus on their application as shielding devices in clinical settings. Additionally, the weight of lead shielding materials can evoke reluctance in pediatric patients undergoing X-ray imaging. A total of 12 materials were printed using their respective 3D printers. These materials were then subjected to X-ray testing using diagnostic X-ray equipment and an exposure meter. The goal was to evaluate their shielding capabilities in comparison to 1 mm lead. The results of this evaluation revealed that VisiJet PXL-Pastel, produced using the CJP method, exhibited the highest shielding performance. Therefore, VisiJet PXL-Pastel by CJP method was selected for the creation of a shielding device designed for pediatric reproductive organs. Subsequent tests demonstrated that both the newly created shielding device and conventional lead shielding equipment achieved the same maximum shielding rate at 50 kVp. Specifically, the shielding rate for the 3D printed device was measured at 84.53%, while the conventional lead shielding equipment, categorized as Apron1 (85.74%), Apron2 (99.98%), and Apron3 (99.04%), demonstrated similar performance. In conclusion, the CJP-produced VisiJet PXL-Pastel material showcased excellent radiation shielding capabilities, allowing for anatomical observations of the target organs and their surrounding structures in X-ray images. Furthermore, its lower weight in comparison to traditional lead shielding materials makes it a clinically practical and use- ful choice, particularly for pediatric applications.
Abstract
In this study, the aim was to assess the shielding performance of different 3D printing materials, specifically those produced using FDM, SLA, and CJP methods, with a focus on their application as shielding devices in clinical settings. Additionally, the weight of lead shielding materials can evoke reluctance in pediatric patients undergoing X-ray imaging. A total of 12 materials were printed using their respective 3D printers. These materials were then subjected to X-ray testing using diagnostic X-ray equipment and an exposure meter. The goal was to evaluate their shielding capabilities in comparison to 1 mm lead. The results of this evaluation revealed that VisiJet PXL-Pastel, produced using the CJP method, exhibited the highest shielding performance. Therefore, VisiJet PXL-Pastel by CJP method was selected for the creation of a shielding device designed for pediatric reproductive organs. Subsequent tests demonstrated that both the newly created shielding device and conventional lead shielding equipment achieved the same maximum shielding rate at 50 kVp. Specifically, the shielding rate for the 3D printed device was measured at 84.53%, while the conventional lead shielding equipment, categorized as Apron1 (85.74%), Apron2 (99.98%), and Apron3 (99.04%), demonstrated similar performance. In conclusion, the CJP-produced VisiJet PXL-Pastel material showcased excellent radiation shielding capabilities, allowing for anatomical observations of the target organs and their surrounding structures in X-ray images. Furthermore, its lower weight in comparison to traditional lead shielding materials makes it a clinically practical and use- ful choice, particularly for pediatric applications.
참고문헌 (19)
- Status of diagnostic x-ray equipment in the Republic of Korea, "Korea Disease Control and Prevention Agency", ~ (2021)
- OECD health statistics 2022, "Ministry of Health and Welfare", ~ (2023)
- "Assessment of radiation exposure of Korean population by medical radiation"[URL]
- ICRP, "The 2007 recommendations of the international commission on radiological protection. ICRP Publication 103", Ann. ICRP, 37 (2007)
- 임창선, "핵의학과에서 방사선 피폭관리 실태에 대한 조사 연구", 한국산학기술학회논문지, 10(7), pp.1760~1765 (2009), 한국산학기술학회
- Brenner D, "Estimated risks of radiation-induced fatal cancer from pediatric CT", AJR Am J Roentgenol, 176, pp.289~296 (2001)[DOI]
- 김교태, "몬테카를로 시뮬레이션을 통한 연속 엑스선 에너지에서 납(Pb)과 텅스텐(W)의 흡수 스펙트럼 비교 연구", 한국방사선학회논문지, 6(6), pp.483~487 (2012), 한국방사선학회[DOI]
- 김지연, "최근 30년간 국내 논문에 보고된 납중독증에 대한 고찰", 대한내과학회지, 66(6), pp.617~624 (2004), 대한내과학회
- 배만재, "몬테카를로 시뮬레이션을 이용한 보호복용 방사선 차폐 소재 연구", 품질경영학회지, 43(3), pp.239~252 (2015), 한국품질경영학회[DOI]
- 박기석, "3D 프린팅용 금속 입자 필라멘트의 물성 및 차폐 능력 평가", 한국방사선학회논문지, 15(5), pp.697~704 (2021), 한국방사선학회[DOI]
- 오왕균, "FDM 방식의 3D 프린터를 이용한 골반 골절 환자의 맞춤형 모델제작", 한국콘텐츠학회 논문지, 14(11), pp.370~377 (2014), 한국콘텐츠학회[DOI]
- 이홍연, "3D 프린팅 기술을 이용한 원료에 대한 방사선 차폐능 평가: FDM 방식의 3D 프린팅 기술을 중심으로", 한국방사선학회논문지, 12(7), pp.909~917 (2018), 한국방사선학회[DOI]
- 박기석, "고밀도 폴리에틸렌과 비스무트를 이용한 3D 프린팅용 방사선 복합필라멘트 개발 및 차폐능력 평가", 한국방사선학회논문지, 16(3), pp.233~240 (2022), 한국방사선학회[DOI]
- 장희민, "3차원 프린팅 기술을 이용한 차폐체 제작 및 유용성 평가", 한국방사선학회논문지, 13(7), pp.1015~1024 (2019), 한국방사선학회[DOI]
- Korea Disease Control and Prevention Agency, "Korean diagnostic reference level for general radiography and mammography in 2022", ~ (2023)
- 최성현, "소아 환자의 성별과 연령별 생식선 차폐체 제작을 통한유용성 평가", 방사선산업학회지, 9(2), pp.69~75 (2015), (사)한국방사선산업학회[DOI]
- Kim YH, "Evaluation of effective dose during X-ray training in a radiological technology program in Korea", Journal of Radiation Research and Applied Sciences, 11(4), pp.383~392 (2018)[DOI]
- 조용인, "인터벤션 시술 시 환자의 선량감소를 위한 3D 프린팅 재료의 적용성 평가", 방사선기술과학, 43(3), pp.169~176 (2020), 대한방사선과학회
- 조용인, "골밀도검사에서 피검자의 장기선량 측정 및 차폐기구의 효용성 평가", 방사선기술과학, 43(3), pp.187~194 (2020), 대한방사선과학회