A Numerical Study on Gas Mixing Time in a Low-Pressure (Driven) Section of a Shock Tube
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The fuel and oxidizer mixing process in the shock tube driven section is simulated numerically. The boundary condition is set based on an shock tube experimental condition. The objective is to predict the gas mixing time for experiments. In the experiment, the amount of fuel to be injected is determined in advance. Then, according to duration of fuel injection, 5 cases with the same fuel mass but different fuel mass flow rate are simulated. After fuel is injected into the driven section, the fuel and air will be mixed with each other through convection and diffusion processes. The mixing time is predicted numerically for experiments.
Abstract
The fuel and oxidizer mixing process in the shock tube driven section is simulated numerically. The boundary condition is set based on an shock tube experimental condition. The objective is to predict the gas mixing time for experiments. In the experiment, the amount of fuel to be injected is determined in advance. Then, according to duration of fuel injection, 5 cases with the same fuel mass but different fuel mass flow rate are simulated. After fuel is injected into the driven section, the fuel and air will be mixed with each other through convection and diffusion processes. The mixing time is predicted numerically for experiments.
참고문헌 (15)
- Hilal El Merhubi, "A high pressure experimental and numerical study of methane ignition", Fuel, pp.164~172 (2016)
- NanBei, "The Development of High Pressure Shock Tube and Experimental Study on Ignition Delay of Hydrocarbon", Master, pp.2011
- Hsi-Ping S. Shen, "A shock tube study of iso-octane ignition at elevated pressures: The influence of diluent gases", Combust. Flame., 155, pp.739~755 (2008)
- Robert S. Tranter, "Shock tube", time-of-flight mass spectrometer for high temperature kinetic studies, 2007, pp.78(3), 034101~
- A. E.L. Bakali, "Experimental and modeling study of the oxidation of natural gas in a premixed flame, shock tube, and jet-stirred reactor", Combust. Flame., 137, pp.109~128 (2004)
- 왕위엔강, "A Numerical Study on Pressure Variation in a Shock Tube by Changing the Diameter Ratio of Low-Pressure (Driven) to High-Pressure (Driver) Part", 한국연소학회지, 21(4), pp.16~22 (2016), 한국연소학회[DOI]
- 한희선, "충격파관을 이용한 메탄", 산소 혼합기의 점화지연시간 측정, 2017, pp.22(1), 8~13[DOI]
- Luong Dinh Thi, "Shock tube study on ignition delay of multi-component syngas mixtures - Effect of equivalence ratio", Int. J. Hydrog. Energy, 39, pp.6034~6043 (2014)
- D. F. Davidson, "Shock tube measurement of Iso-octane ignition times and OH concentration time histories", Proc. Combust. Inst., 29, pp.1295~1301 (2002)
- ANSYS Inc., "ANSYS Fluent Theory Guide", ~ (2015)
- ANSYS Inc., "ANSYS Fluent Tutorial Guide", ~ (2015)
- Landolt-Börnstein, "Gases in Gases", Liquids and their Mixtures, 15 (2007)
- Scott A. Socolofsky, "Environmental Fluid Mechanics Part I: Mass Transfer and Diffusion", pp.2~17 (2002)
- Daniel M. Dobkin, "Principles of Chemical Vapor Deposition", pp.27~66
- Weidong He, "Gas Transport in Solid Oxide Fuel Cells", Combust. Flame., pp.9~16 (2014)