디젤 엔진 0D 해석을 위한 CMC 모델 응용
Application of CMC Model in 0D Simulation of Diesel Engine
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
A numerical analysis of the diesel engine performance and pollutant emissions was conducted by 0D simulation based on the CMC combustion model for turbulent diffusion flames. For the combustion analysis, the CMC model, the skeletal mechanism for n-heptane and the NOx mechanism included in GRI 3.0 were used. The evaporation process of fuel was simulated using the multizone spray model, and the density weighted PDF for the mixture fraction was calculated in real time based on the momentum conservation principle with the empirical models for spray tip velocity. The analysis was conducted by applying a multiple flame structure to the operating conditions of the multi-stage fuel injection method, and the predicted results well matched to the experimental data for the pressure variations. It also shows good qualitative and quantitative results for NOx.
Abstract
A numerical analysis of the diesel engine performance and pollutant emissions was conducted by 0D simulation based on the CMC combustion model for turbulent diffusion flames. For the combustion analysis, the CMC model, the skeletal mechanism for n-heptane and the NOx mechanism included in GRI 3.0 were used. The evaporation process of fuel was simulated using the multizone spray model, and the density weighted PDF for the mixture fraction was calculated in real time based on the momentum conservation principle with the empirical models for spray tip velocity. The analysis was conducted by applying a multiple flame structure to the operating conditions of the multi-stage fuel injection method, and the predicted results well matched to the experimental data for the pressure variations. It also shows good qualitative and quantitative results for NOx.
참고문헌 (22)
- An Overview of Zero-Dimensional Thermodynamic Models for IC Engine Data Analysis, "D. E. Foster", SAE, ~, pp.SAE Technical Paper 852070 (1985)
- A Combustion Correlation for Diesel Engine Simulation, "N. Watson", SAE, ~, pp.SAE Technical Paper 800029 (1980)
- L. Ning, "A Cycle Simulation Program for the Dynamic Operation of a Single Cylinder Direct Injection Diesel", pp.1988
- H. Hiroyasu, "Development and use of a spray combustion modeling to predict diesel engine efficiency and pollutant emissions: Part 1combustion modeling", Bulletin of JSME, 26(214), pp.569~575 (1983)
- Fuel Spray Trajectory and Dispersion in a D.I. Diesel Combustion Chamber, "H. Hiroyasu", SAE, ~, pp.SAE Technical Paper 890462 (1989)
- Model Verification of the Evaporating Diesel Spray Distribution in the Combustion Chamber of a D.I. Diesel Engine, "T. Yoshizaki", SAE, ~, pp.SAE Technical Paper 962054 (1996)
- J. Kwon, "Zerodimensional simulation of diesel engine combustion and emissions based on CMC model and skeletal reaction mechanism", SAE Int. J. Engines, 4(1), pp.964~975 (2011)
- A. Y. Klimenko, "Conditional moment closure for turbulent combustion", Prog. Energy Combust. Sci., 25(6), pp.595~687 (1999)
- S. Liu, "Effects of strain rate on high-pressure nonpremixed n-heptane autoignition in counterflow", Combustion and flame, 137(3), pp.320~339 (2004)
- Cycle Simulation Diesel HCCI Modeling Studies and Control, "K. Narayanaswamy", SAE, ~, pp.SAE Technical Paper 2004-01-2997 (2004)
- Universal Diesel Engine Simulator (UniDES): 1st Report: Phenomenological Multi-Zone PDF Model for Predicting the Transient Behavior of Diesel Engine Combustion, "K. Inagaki", SAE, ~, pp.SAE Technical Paper 2008-01-0843 (2008)
- A. Dulbecco, "A 0D Phenomenological Approach to Model Diesel HCCI Combustion with Multi-Injection Strategies Using Probability Density Functions and Detailed Tabulated Chemistry", SAE Int. J. Engines, 2(1), pp.548~568 (2009)
- Modelling a Dual-Fuelled Multi-Cylinder HCCI Engine Using a PDF Based Engine Cycle Simulator, "A. Bhave", SAE, ~, pp.SAE Technical Paper 2004-01-0561 (2004)
- R. Zhao, "Characteristic and regulation method of parallel turbocompound engine with steam injection for waste heat recovery", Energy, 208, pp.118422~ (2020)
- L. Xiang, "Parametric knocking performance investigation of spark ignition natural gas engines and dual fuel engines", Journal of Marine Science and Engineering, 8(6), pp.459~ (2020)
- Advanced Approaches for Heat Transfer Calculations, "G. F. Hohenberg", SAE, ~, pp.SAE Technical Paper 790825 (1979)
- Unsteady Vaporization Histories and Trajectories of Fuel Drops Injected into Swirling Air, "G. L. Borman", SAE, ~, pp.SAE Technical Paper 620271 (1962)
- Mathematical Simulation of a Large Turbocharged Two-Stroke Diesel Engine, "E. E. Streit", SAE, ~, pp.SAE Technical Paper 710176 (1971)
- Fuel Droplet Size Distribution in Diesel Combustion Chamber, "H. Hiroyasu", SAE, ~, pp.SAE Technical Paper 740715 (1974)
- Extended CMC Model for Turbulent Spray Combustion in a Diesel Engine, "J. Seo", SAE, ~, pp.SAE Technical Paper 2008-01-2411 (2008)
- E. E. O’Brien, "The conditional dissipation rate of an initially binary scalar in homogeneous turbulence", Phys. Fluids A: Fluid dynamics, 3(12), pp.3121~3123 (1991)
- "GRI-MECH 3.0"[URL]