HSDI 디젤엔진의 연료분사계와 연소현상을 연계한 수치해석
Coupled Simulation of Common Rail Fuel Injection and Combustion Characteristics in a HSDI Diesel Engine
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, the coupled simulation of fuel injection model and three-dimensional KIVA-3V code was tried to develop an algorism for predicting the effects of varying fuel injection parameter on the characteristics of fuel injection and emissions. The numerical simulations were performed using STAR-CD code in order to calculate the intake air flow, and the combustion characteristics is examined by KIVA-3V code linked with the conditional moment closure(CMC) model to predict mean turbulent reaction rate. Parametric investigation with respect to twelve relevant injection parameters shows that appropriate modification of control chamber orifice diameter, needle valve spring constant and nozzle chamber orifice diameter can significantly reduce NOx and soot emissions. Consequently, it is needed to optimize the fuel injection system to reduce the specific emissions such as NOx and soot.
Abstract
In this study, the coupled simulation of fuel injection model and three-dimensional KIVA-3V code was tried to develop an algorism for predicting the effects of varying fuel injection parameter on the characteristics of fuel injection and emissions. The numerical simulations were performed using STAR-CD code in order to calculate the intake air flow, and the combustion characteristics is examined by KIVA-3V code linked with the conditional moment closure(CMC) model to predict mean turbulent reaction rate. Parametric investigation with respect to twelve relevant injection parameters shows that appropriate modification of control chamber orifice diameter, needle valve spring constant and nozzle chamber orifice diameter can significantly reduce NOx and soot emissions. Consequently, it is needed to optimize the fuel injection system to reduce the specific emissions such as NOx and soot.
참고문헌 (13)
- NOx Reduction from Diesel Combustion Using Pilot Injection with High Pressure Fuel Injection, "Kobayashi Shinji", SAE, ~, pp.Paper 920461 (1992)
- Effect of High Pressure Injection on Soot Formation Processes in a rapid Compression Machine to Simulate Diesel Flames, "T.Kamimoto", SAE, ~, pp.Paper 87610 (1987)
- Optimization of the diesel engine injection nozzle, "M.Milan", SAE, ~, pp.Paper 932467 (1993)
- Klimenko,A.Y, "Conditional moment closure for turbulent combustion", Prog.Energy Combust.Sci, 25, pp.595~687 (1999)
- Advanced modelling of common-rail injector dynamics and comparison with experiments, "G.M.Bianchi,", SAE, ~, pp.Paper 2003-01-0006 (2003)
- A new accumulator fuel system for direct injection diesel engines, "J.Akagi,t", SAE, ~, pp.821114 (1982)
- Diesel electro-injector:A numerical simulation code, "P. Digesu", SAE, ~, pp.Paper 940193 (1994)
- N. S. Smith, "A comparison of CMC and PDF modelling predictions with experimental nitic oxide LIF", Raman measurements in a turbulent $H_2$ jet flame, 1995, pp.105, 357~375
- Kim,S.H., "Use of the conditional moment closure model to predict NO formation in a turbulent $CH_4", H_2$ flame over a bluff body, 2002, pp.130, 94~111
- Kim,S.H., "Modeling autoignition of a turbulent methane jet by the conditional moment closure model", Proc. Combust. Inst., 28, pp.185~191 (2000)
- Liu Shiling, "Effects of strain rate on highpressure nonpremixed n-heptane autoignition in counterflow", Combustion and Flame,, 137, pp.320~339 (2004)
- A computational and experimental study of combustion chamber deposit effects on NOx emissions, "W.M.Studzinski,", SAE, ~, pp.Paper 932815 (1993)
- S.-Y. LEE, "NUMERICAL MODEL ON THE FUEL INJECTION CHARACTERISTICS FOR PREDICTING EXHAUST EMISSIONS FROM A MARINE DIESEL ENGINE", International Journal of Automotive Technology, 6(3), pp.205~213 (2005), 한국자동차공학회