디젤 엔진 운전 조건에서 분무 연소 과정과 난류 화염 구조 특성에 대한 해석
Characteristization of Spray Combustion and Turbulent Flame Structures in a Typical Diesel Engine Condition
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Simulation is performed to analyze the characteristics of turbulent spray combustion in a diesel engine condition. An extended Conditional Moment Closure (CMC) model is employed to resolve coupling between chemistry and turbulence. Relevant time and length scales and dimensionless numbers are estimated at the tip and the mid spray region during spray development and combustion. The liquid volume fractions are small enough to support validity of droplets assumed as point sources in two-phase flow. The mean scalar dissipation rates (SDR) are lower than the extinction limit to show flame stability throughout the combustion period. The Kolmogorov scales remain relatively constant, while the integral scales increase with decay of turbulence. The chemical time scale decreases abruptly to a small value as ignition occurs with subsequent heat release. The Da and Ka show opposite trends due to variation in the chemical time scale. More work is in progress to identify the spray combustion regimes.
Abstract
Simulation is performed to analyze the characteristics of turbulent spray combustion in a diesel engine condition. An extended Conditional Moment Closure (CMC) model is employed to resolve coupling between chemistry and turbulence. Relevant time and length scales and dimensionless numbers are estimated at the tip and the mid spray region during spray development and combustion. The liquid volume fractions are small enough to support validity of droplets assumed as point sources in two-phase flow. The mean scalar dissipation rates (SDR) are lower than the extinction limit to show flame stability throughout the combustion period. The Kolmogorov scales remain relatively constant, while the integral scales increase with decay of turbulence. The chemical time scale decreases abruptly to a small value as ignition occurs with subsequent heat release. The Da and Ka show opposite trends due to variation in the chemical time scale. More work is in progress to identify the spray combustion regimes.
참고문헌 (8)
- W. T. Lyn, "Study of burning rate and nature of combustion in diesel engines", Proceedings of the Combustion Institute, 통권 : 9, pp.1069~1082 (1962)
- A conceptual model of DI diesel combustion based on laser-sheet imaging, "J. E. Dec", ~, pp.SAE Paper, 970873 (1997)
- The development and application of a diesel ignition and combustion model for multidimensional engine simulation, "S. C. Kong", ~, pp.SAE paper, 950278 (1995)
- S. H. Kim, "Modeling autoignition of a turbulent methane jet by the conditional moment closure model", Proceedings of the Combustion Institute, 통권 : 28, pp.185~191 (2000)
- W. T. Kim, "Numerical simulation of spray autoignition by the first-order conditional moment closure model", Proceedings of the Combustion Institute, 통권 : 29, pp.569~576 (2002)
- KIVA III: a KIVA program with block structured mesh for complex geometries, "A. A. Amsden", ~, pp.Los Alamos Laboratory Report, LA-12503-MS (1993)
- A. Y. Klimenko, "Conditional moment closure for turbulent combustion", Proceeding of energy combustion, 통권 : 25, pp.595~687 (1999)
- E. E. O'Brien, "The conditional dissipation rate of an initially binary scalar in homogeneous turbulence", Physics of Fluids, 3, pp.3121~3123 (1991)