석탄 보일러에서 회분 부착성향 예측 접근 방법에 대한 고찰
Consideration on the Prediction Approach of Ash Deposition Propensity in Coal-fired Boilers
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Various approaches have been proposed to predict the ash deposition (slagging and fouling) propensity of coal, which is essential in maintaining high efficiency and preventing corrosion/damage of a coal-fired boiler. The common method is to establish an index of the ash deposition propensity based on elementary coal composition and advanced characterization of ash properties, which is readily applicable to design, operation and maintenance of coal-fired boilers. Although many indexes have been developed for this purpose, their validity is still not satisfactory in actual applications to particular coal types or operating conditions. This paper reviews the status of predictive approaches for the ash deposition propensity, and assesses the performance of existing indexes by comparing the results for selected coals. This work will contribute to the development of a comprehensive and practical method for prediction of the ash deposition propensity.
Abstract
Various approaches have been proposed to predict the ash deposition (slagging and fouling) propensity of coal, which is essential in maintaining high efficiency and preventing corrosion/damage of a coal-fired boiler. The common method is to establish an index of the ash deposition propensity based on elementary coal composition and advanced characterization of ash properties, which is readily applicable to design, operation and maintenance of coal-fired boilers. Although many indexes have been developed for this purpose, their validity is still not satisfactory in actual applications to particular coal types or operating conditions. This paper reviews the status of predictive approaches for the ash deposition propensity, and assesses the performance of existing indexes by comparing the results for selected coals. This work will contribute to the development of a comprehensive and practical method for prediction of the ash deposition propensity.
참고문헌 (29)
- Economic Consequences of Boiler Cheanning Effectiveness, "T. Moskal", Diamond Power International, ~, pp.Report No. DPTP-98-1 (1998)
- 이현동, "인도네시아산 발전용 수입 석탄 2종의 연소특성 비교 평가", 에너지공학, 19(2), pp.136~142 (2010), 한국에너지학회
- Combustion, Fossil Power Systems:A Reference Book on Fuel Burning and Steam Generation, "J.G. Singer", Combustion Engineering, ~ (1981)
- A. F. Stam, "Review of Models and Tools for Slagging and Fouling Prediction for Biomass Co-combustion", Task, ~ (2009)
- H.Y. Park, "Advanced Slagging Propensity of Coal and its Assessment with the Conventional Indices", Energy Engg. J., 21(4), pp.427~434 (2012)
- S.H. Lee, "Prediction of Slagging Propensity of Coal Ash", Energy Engg. J., 4(1), pp.42~51 (1995)
- S.K. Knudsen, "Numerical Investigation of Ash Deposition in Straw-fired Boilers- Using CFD as the Framework for Slagging and Fouling Predictions", Doctor, pp.2001
- K.J. An, "Study on Slagging Characteristics of Hybrid Coals using the Thermo-mechanical Analysis", The KSME Symposium, pp.59~61 (2013)
- N. Mendes, "Characterization and Growth Modeling of Ash Deposits in Coal Fired Boilers", Powder Technol., 217, pp.61~68 (2012)
- R.W. Bryers, "Firing Slagging, Fouling, and Hightemperature Corrosion of Heat-transfer Surface due to Impurities in Stream-raising Fuels", Prog. Energy Combust. Sci, 29, pp.29~120 (1996)
- S.W. Chung, "A Study on the Slagging Behavior of Coal Ash in Gasifier using DTF", Energy Engg. J., 4(2), pp.203~213 (1994)
- B.J. Jung, "High Temperature Viscosity Measurement of Coal Ash Slags in Oxidizing Atmosphere", Energy Engg. J., 4(3), pp.324~330 (1995)
- B.C. Choi, "Phase Equilibrium Analysis of Slagging Propensity of Coal Ash in Combustion", Gasification Environments, 1999, 75~81
- B. Jung, "Characteristics of Coal Ash Melting in Bench Scale Entrained Coal Gasifier", Energy Eng. J., 8(1), pp.127~136 (1999)
- K. Kang, "An Experimental Study on Slagging", Fouling Characteristics for Various Coals in a 50kWth Pulverized Coal Combustion System, 2012, 107~109
- B.C. Choi, "A Study on the Slagging Behavior with Various Composition of Coal Ash", Energy Engg. J., 8(3), pp.445~451 (1999)
- Y.S. Kim, "Influence of Bituminous Coal Characteristics on Thermal Utility Boiler Design", The KSME Symposium, pp.137~156 (2002)
- B.P. Lim, "Studies of Rate of Ash Deposit of Various Coals for Analysis of IGCC Fouling Effect", The Korean Society for Energy Engineering Symposium, pp.61~66 (2000)
- B.P. Lim, "Numerical Model of Ash Deposition Behavior in the Bench Scale Entrained-bed Gasifier with DTF(Drop Tube Furnace)", The Korean Society for Energy Engineering Symposium, pp.25~32 (2001)
- L.Y. Huang, "Prediction of Ash Deposition on Superheater Tubes from Pulverized Coal Combustion", Fuel, 75(3), pp.271~279 (1996)
- H. Wang, "Modeling of Ash Deposition in Large-scale Combustion Facilities Burning Pulverized Coal", Prog. Energy Combust. Sci, 23, pp.267~282 (1997)
- F.C.C. Lee, "Modelling Ash Deposition in Pulverized Coal-fired Applications", Prog. Energy Combust. Sci, 25, pp.117~132 (1999)
- Z. Ma, "A Comprehensive Slagging and Fouling Frediction Tool for Coal-fired Boilers and its Validation", application, 2007, pp.88, 1035~1043
- 황민영, "500MW급 화력발전 보일러의 석탄회 연소 시뮬레이션", 대한기계학회논문집 B, 35(9), pp.939~946 (2011), 대한기계학회
- 홍정우, "4-Layer Slagging Model을 적용한 300MW급 Shell형 1단 분류층 석탄 가스화기 전산수치해석", 한국연소학회지, 17(1), pp.1~11 (2012), 한국연소학회
- K. Jang, "Prediction of Ash Deposition Propensity in a Pilot-scaled Pulverized Coal Combustion", The 46th KOSCO Symposium, pp.87~90 (2013)
- J.D. Watt, "The Flow Properties of Slags Formed from the Ashes of British Coals: Part 1Viscosity of Homogeneous Liquid Clags in Relation to Slag Composition", J. Inst. Fuel, 42, pp.99~103 (1969)
- Inorganic Transformations and Ash Deposition during Combustion, "T. R. Bott", United Engineering Trustees Inc., ~ (1992)
- A. Lawrence, "A Novel Tool for Assessing Slagging Propensity of Coals in PF Boilers", Fuel, 87, pp.946~950 (2008)