미분탄 화력발전소 연료로서 고수분 인도네시아탄의 연소특성
Combustion Characteristics of High Moisture Indonesia Coal as a Pulverized Fuel at Thermal Power Plant
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
It is strongly desired for coal-fired power plants to utilize not only low-rank coals with high moisture contents, but also lowering cost with diversifying fuel sources. In this study, combustion characteristics of low rank coal with high moisture, and standard pulverized coals are experimentally investigated using TGA (Thermogravimetric Analysis) and DTF (drop tube furnace). The coals tested are three kinds of coal with moisture content ranging from 8.32 to 26.82%. The results show that under the air combustion condition, the burn-out time at TGA rises as moisture content increases, and standard pulverized coal with 8.32% moisture content showed the lowest activation energy of 55.73 kJ/mol. In case of the high amount of moisture, the combustion efficiency decreases due to evaporation heat loss, and unburned carbon in ash produced at combustion process in DTF increased. Aslo, initial deformation temperature of slag attached in alumina tube of DTF decreased with lowering the crytallinity of anorthite and augite. To improve the combustion reactivity and efficiency, it is effective to upgrade through drying the high moisture coal to moisture level (less than 10%) of standard pulverized coal.
Abstract
It is strongly desired for coal-fired power plants to utilize not only low-rank coals with high moisture contents, but also lowering cost with diversifying fuel sources. In this study, combustion characteristics of low rank coal with high moisture, and standard pulverized coals are experimentally investigated using TGA (Thermogravimetric Analysis) and DTF (drop tube furnace). The coals tested are three kinds of coal with moisture content ranging from 8.32 to 26.82%. The results show that under the air combustion condition, the burn-out time at TGA rises as moisture content increases, and standard pulverized coal with 8.32% moisture content showed the lowest activation energy of 55.73 kJ/mol. In case of the high amount of moisture, the combustion efficiency decreases due to evaporation heat loss, and unburned carbon in ash produced at combustion process in DTF increased. Aslo, initial deformation temperature of slag attached in alumina tube of DTF decreased with lowering the crytallinity of anorthite and augite. To improve the combustion reactivity and efficiency, it is effective to upgrade through drying the high moisture coal to moisture level (less than 10%) of standard pulverized coal.
참고문헌 (8)
- 저등급 석탄의 고품위화 기술 개발, 지식경제부 기획보고서, "이시훈", ~ (2008)
- K. Brendow, "World and Central European Coal Demand Perspectives to 2030", Int. Conf. Coal and Power Eng., pp.13~15 (2006)
- D. F. Umar, "Change of combustion characteristics of Indonesian low rank coal due to upgraded brown coal process", Fuel Processing Technology, 87, pp.1007~1011 (2006)
- "BP Statistical Review of World Energy"[URL]
- J. W. Cumming, "Reactivity assessment of coal via a weight mean activation energy", Fuel, 63(10), pp.1436~1440 (1984)
- 기존 석탄혼소 보일러에서의 저열량탄 사용에 관한 연구, 한국전력공사 전력연구원 기술보고서, "민중기", ~, pp.KRC 85G-T07 (1987)
- A. G. Borrego, "Oxy-combustion of high rank coals", Presented at the 24th International Pittsburgh coal conference, pp.10~14 (2007)
- 아라이 야스오, "크링커의 조성과 구조, 시멘트 재료화학 개정 2판", pp.112~1494 (1998), 전남대학교 출판부