Color evaluation of composite resin using dental colorimeter according to the specimen size
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The purpose of this study was to evaluate the color of a single shaded composite resin of various specimen sizes, using a dental colorimeter. Four separate transparent acrylic plates were prepared, 40 mm × 20 mm in size and 2 mm in thickness, and two holes of 6.5 mm, 8.5 mm, 10.5 mm, or 12.5 mm in diameter were drilled on each different plate. The holes were filled with A3 shade flowable composite resin (DenFil Flow), and lightly cured (n = 10). After separation of the specimens from the plates, CIE L*a*b* values of the resin specimens were measured with a dental colorimeter (ShadeEye NCC). Data were analyzed with one-way ANOVA and Tukey HSD (p<0.05). The color difference (ΔE) between the resin specimens was also calculated. The L* values and b* values were significantly different between 6.5 and 8.5 mm specimens, and between 10.5 and 12.5 mm specimens. The a* values significantly differed among the various specimen sizes. The ΔE between pairs of various-sized specimens ranged from 0.3 to 2. The highest ΔE difference was observed between 6.5 mm and 12.5 mm specimens. CIE L*a*b* values of single-shade composite resin specimens were significantly different for various specimen sizes when measured with a colorimeter. Also, the color difference (ΔE) between pairs of various-sized specimens (ranging from 0.3 to 2) is indicative of perceptible differences among resin specimens. Therefore, when using a dental colorimeter, the specimen size of a composite resin needs to be carefully monitored for consistent CIE L*a*b* values.
Abstract
The purpose of this study was to evaluate the color of a single shaded composite resin of various specimen sizes, using a dental colorimeter. Four separate transparent acrylic plates were prepared, 40 mm × 20 mm in size and 2 mm in thickness, and two holes of 6.5 mm, 8.5 mm, 10.5 mm, or 12.5 mm in diameter were drilled on each different plate. The holes were filled with A3 shade flowable composite resin (DenFil Flow), and lightly cured (n = 10). After separation of the specimens from the plates, CIE L*a*b* values of the resin specimens were measured with a dental colorimeter (ShadeEye NCC). Data were analyzed with one-way ANOVA and Tukey HSD (p<0.05). The color difference (ΔE) between the resin specimens was also calculated. The L* values and b* values were significantly different between 6.5 and 8.5 mm specimens, and between 10.5 and 12.5 mm specimens. The a* values significantly differed among the various specimen sizes. The ΔE between pairs of various-sized specimens ranged from 0.3 to 2. The highest ΔE difference was observed between 6.5 mm and 12.5 mm specimens. CIE L*a*b* values of single-shade composite resin specimens were significantly different for various specimen sizes when measured with a colorimeter. Also, the color difference (ΔE) between pairs of various-sized specimens (ranging from 0.3 to 2) is indicative of perceptible differences among resin specimens. Therefore, when using a dental colorimeter, the specimen size of a composite resin needs to be carefully monitored for consistent CIE L*a*b* values.
참고문헌 (20)
- Paul S, "Visual and spectrophotometric shade analysis of human teeth", J Dent Res, 81, pp.578~582 (2002)
- William M. Johnston, "Color measurement in dentistry", Journal of Dentistry, 37, pp.e2~e6 (2009), Elsevier BV[DOI]
- 박정원, "복합레진의 색에 대한 이해", Restorative Dentistry and Endodontics, 36(4), pp.271~279 (2011), 대한치과보존학회[DOI]
- Francis F. Tung, "The repeatability of an intraoral dental colorimeter", The Journal of Prosthetic Dentistry, 88(6), pp.585~590 (2002), Elsevier BV[DOI]
- Okubo SR, "Evaluation of visual and instrument shade matching", J Prosthet Dent, 80, pp.642~648 (1998)
- Yu B, "Comparison of the color stability of flowable and universal resin composites", Am J Dent, 22, pp.160~164 (2009)
- Lee YK, "Color and translucency of A2 shade resin composites after curing, polishing and thermocycling", Oper Dent, 30, pp.436~442 (2005)
- Adriana Postiglione Bührer Samra, "Color stability evaluation of aesthetic restorative materials", Brazilian Oral Research, 22(3), pp.205~210 (2008), FapUNIFESP (SciELO)[DOI]
- Patricia Aleixo dos Santos Domingos, "Composite resin color stability: influence of light sources and immersion media", Journal of Applied Oral Science, 19(3), pp.204~211 (2011), FapUNIFESP (SciELO)[DOI]
- Saijai Tanthanuch, "The effect of red and white wine on color changes of nanofilled and nanohybrid resin composites", Restorative Dentistry and Endodontics, 41(2), pp.130~136 (2016), 대한치과보존학회
- Paravina RD, "Color compatibility of resin composites of identical shade designation", Quintessence Int, 37, pp.713~719 (2006)
- Farah RI, "Spectrophotometric Evaluation of Color Changes of Bleach-shade Resin-based Composites after Staining and Bleaching", J Contemp Dent Pract, 15, pp.587~594 (2014)
- Hoon-Sang Chang, "Effects of layering technique on the shade of resin overlays and the microhardness of dual cure resin cement", Brazilian Oral Research, 28(1), pp.01~06 (2014), FapUNIFESP (SciELO)[DOI]
- 윤종현, "저점도 벌크필레진과 복합레진 적층수복물의 색조 평가", 구강회복응용과학지, 31(4), pp.294~300 (2015), 대한턱관절교합학회[DOI]
- Hervás-Garía A, "Composite resins. A review of the materials and clinical indications", Med Oral Patol Oral Cir Bucal, 11, pp.E215~E220 (2006)
- Nazanin Emami, "How filler properties, filler fraction, sample thickness and light source affect light attenuation in particulate filled resin composites", Dental Materials, 21(8), pp.721~730 (2005), Elsevier BV[DOI]
- Yong-Kyu Lim, "Influence of filler distribution on the color parameters of experimental resin composites", Dental Materials, 24(1), pp.67~73 (2008), Elsevier BV[DOI]
- M. D. GROSS, "A colorimetric study of coffee and tea staining of four composite resins", Journal of Oral Rehabilitation, 4(4), pp.311~322 (1977), Wiley-Blackwell[DOI]
- Nabiel Alghazali, "Assessment of perceptibility and acceptability of color difference of denture teeth", Journal of Dentistry, 40, pp.e10~e17 (2012), Elsevier BV[DOI]
- Rade D. Paravina, "Color Difference Thresholds in Dentistry", Journal of Esthetic and Restorative Dentistry, 27, pp.S1~S9 (2015), Wiley-Blackwell[DOI]