생산설비의 유지보수서비스와 제품의 불량률을 고려한 최적 생산주기 연구
Determining an Optimal Production Time for EPQ Model with Preventive Maintenance and Defective Rate
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Purpose: The purpose of this paper is to determine an optimal production time for economic production quantity model with preventive maintenance and random defective rate as the function of a machinery deteriorates. Methods: If a machinery shifts from “in-control” state to “out-of-control” state, a proportion of defective items being produced increases. It is assumed that time to state shift is a random variable and follows an arbitrary distribution. The elapsed time until process shift decreases stochastically as a production cycle repeats and quasi-renewal process is used to implement for production facilities to deteriorate. Results: When the exponential parameter for exponential distribution increases, the optimal production time increases. When Weibull distribution is considered, the optimal production time is closely affected by the shape parameter of Weibull distribution. Conclusion: A mathematical model is suggested to find optimal production time and optimal number of production cycles and numerical examples are implemented to validate the patterns for changes of optimal times under different parameters assumptions. The real application is implemented using the proposed approach.
Abstract
Purpose: The purpose of this paper is to determine an optimal production time for economic production quantity model with preventive maintenance and random defective rate as the function of a machinery deteriorates. Methods: If a machinery shifts from “in-control” state to “out-of-control” state, a proportion of defective items being produced increases. It is assumed that time to state shift is a random variable and follows an arbitrary distribution. The elapsed time until process shift decreases stochastically as a production cycle repeats and quasi-renewal process is used to implement for production facilities to deteriorate. Results: When the exponential parameter for exponential distribution increases, the optimal production time increases. When Weibull distribution is considered, the optimal production time is closely affected by the shape parameter of Weibull distribution. Conclusion: A mathematical model is suggested to find optimal production time and optimal number of production cycles and numerical examples are implemented to validate the patterns for changes of optimal times under different parameters assumptions. The real application is implemented using the proposed approach.
참고문헌 (24)
- Bai, Jun, "Repair-limit risk-free warranty policies with imperfect repair", IEEE Transactions on Systems, Man, and Cybernetics-Part A: Systems and Humans, 35(6), pp.765~772 (2005)
- Ben-Daya, Mohamed, "The economic production lot-sizing problem with imperfect production processes and imperfect maintenance", International Journal of Production Economics, 76(3), pp.257~264 (2002)
- Groenevelt, Harry, "Production lot sizing with machine breakdowns", Management Science, 38(1), pp.104~123 (1992)
- 하정랑, "사전확률분포와 Marcov Chain Monte Carlo법을 이용한 최적보전정책 연구", 신뢰성 응용연구, 17(3), pp.188~196 (2017), 한국신뢰성학회
- Hariga, M, "Note: the economic manufacturing lot-sizing problem with imperfect production processes: bounds and optimal solutions", Naval Research Logistics, 45(4), pp.423~433 (1998)
- Kim, Chang Hyun, "An optimal production run length in deteriorating production processes", International Journal of Production Economics, 58(2), pp.183~189 (1999)
- Liao, Gwo-Liang, "Optimal economic production quantity policy for imperfect process with imperfect repair and maintenance", European Journal of Operational Research, 195(2), pp.348~357 (2009)
- 임재학, "중고제품의 보증과 보전정책에 대한 최근 연구 동향", 신뢰성 응용연구, 17(2), pp.159~167 (2017), 한국신뢰성학회
- 임준형, "최소수리 블록교체 모형을 활용한 상태기반 보전 정책 연구", 신뢰성 응용연구, 18(2), pp.114~121 (2018), 한국신뢰성학회[DOI]
- Lin, Gary C., "Economic lot sizing for an imperfect production system subject to random breakdowns", Engineering Optimization, 38(1), pp.73~92 (2006)
- Lin, TM, "Optimal inspection schedule in the imperfect production system under general shift distribution", Journal of the Chinese Institute of Industrial Engineers, 8(2), pp.73~81 (1991)
- Liu, Yu, "Optimal replacement policy for multi-state system under imperfect maintenance", Reliability, IEEE Transactions on, 59(3), pp.483~495 (2010)
- 박민재, "한국형 레몬법을 이용한 이차원적 보증정책 연구", 신뢰성 응용연구, 18(4), pp.349~355 (2018), 한국신뢰성학회[DOI]
- Park, Minjae, "Warranty system-cost analysis using quasi-renewal processes", Opsearch, 45(3), pp.263~274 (2008)
- Park, Minjae, "Altered quasi-renewal concepts for modeling renewable warranty costs with imperfect repairs", Mathematical and Computer Modelling, 52(9-10), pp.1435~1450 (2010)
- Peterson, Rein, "Decision systems for inventory management and production planning" (1979), Wiley
- Pham, Hoang, "Imperfect maintenance", European Journal of Operational Research, 94(3), pp.425~438 (1996)
- Pham, Hoang, "A quasi-renewal process for software reliability and testing costs", Systems, Man and Cybernetics, Part A: Systems and Humans, IEEE Transactions on, 31(6), pp.623~631 (2001)
- Porteus, Evan L, "Optimal lot sizing, process quality improvement and setup cost reduction", Operations research, 34(1), pp.137~144 (1986)
- Rosenblatt, Meir J., "Economic production cycles with imperfect production processes", IIE transactions, 18(1), pp.48~55 (1986)
- Shah, Nita H, "EPQ model for returned", reworked inventories during imperfect production process under price-sensitive stock-dependent demand, 2018, pp.18(2), 343~359
- Sheu, Shey-Huei, "Optimal lot-sizing problem with imperfect maintenance and imperfect production", International journal of systems science, 35(1), pp.69~77 (2004)
- Wang, Hongzhou, "A quasi renewal process and its applications in imperfect maintenance", International journal of systems science, 27(10), pp.1055~1062 (1996)
- Whitin, Thomson M., "Theory of inventory management" (1957), Princeton University Press