정기교체 및 최소수리를 고려한 작업주기 횟수 최적화
Optimal Working Cycles for Minimal Repair Policy
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Purpose: The purpose of this paper is to determine an optimal number of cycle times for the replacement under the circumstance where the system is replaced at the periodic time and the multiple number of working cycles whichever occurs first and the system is minimally repaired between the replacements if it fails. Methods: The system is replaced at periodic time () or cycle time, whichever occurs first, and is repaired minimally when it fails between successive replacements. To determine the optimal number of cycle times, the expected total cost rate is optimized with respect to the number of cycle times, where the expected total cost rate is defined as the ratio of the expected total cost between replacements to the expected time between replacements. Results: In this paper, we conduct a sensitivity analysis to find the following results. First, when the expected number of failures per unit time increases, the optimal number of cycle times decreases. Second, when the periodic time for replacement becomes longer, the optimal number of cycle times decreases. Third, when the expected value for exponential distribution of the cycle time increases, the optimal number of cycle times increases. Conclusion: A mathematical model is suggested to find the optimal number of cycle times and numerical examples are provided through the sensitivity analysis on the model parameters to see the patterns for changes of the optimal number of cycle times.
Abstract
Purpose: The purpose of this paper is to determine an optimal number of cycle times for the replacement under the circumstance where the system is replaced at the periodic time and the multiple number of working cycles whichever occurs first and the system is minimally repaired between the replacements if it fails. Methods: The system is replaced at periodic time () or cycle time, whichever occurs first, and is repaired minimally when it fails between successive replacements. To determine the optimal number of cycle times, the expected total cost rate is optimized with respect to the number of cycle times, where the expected total cost rate is defined as the ratio of the expected total cost between replacements to the expected time between replacements. Results: In this paper, we conduct a sensitivity analysis to find the following results. First, when the expected number of failures per unit time increases, the optimal number of cycle times decreases. Second, when the periodic time for replacement becomes longer, the optimal number of cycle times decreases. Third, when the expected value for exponential distribution of the cycle time increases, the optimal number of cycle times increases. Conclusion: A mathematical model is suggested to find the optimal number of cycle times and numerical examples are provided through the sensitivity analysis on the model parameters to see the patterns for changes of the optimal number of cycle times.
참고문헌 (17)
- Barlow, R., "Optimum Preventive Maintenance Ppolicies", Operations Research, 8(1), pp.90~100 (1960)
- Barlow, R. E., "Mathematical Theory of Reliability. Vol. 17" (1996), Siam
- Fuqing, Y., "A General Imperfect Repair Model Considering Time-dependent Repair Effectiveness", IEEE Transactions on Reliability, 61(1), pp.95~100 (2012)
- Holland, C. W., "Applications of Replacement Theory", AIIE Transactions, 7(1), pp.42~47 (1975)
- Morimura, H., "On Some Preventive Maintenance Polices for IFR", Dept. of Statistics, pp.1969
- Nakagawa, T, "Generalized Models for Determining Optimal Number of Minimal Repairs before Replacement", Journal of the Operations Research Society of Japan, 24(4), pp.325~338 (1981)
- Nakagawa, T., "Optimal Policy of Continuous and Discrete Replacement with Minimal Repair at Failure", Naval Research Logistics Quarterly, 31(4), pp.543~550 (1984)
- Nakagawa, T., "Maintenance Theory of Reliability" (2006), Springer Science & Business Media
- Nakagawa, T., "A Summary of Maintenance Policies for a Finite Interval", Reliability Engineering & System Safety, 94(1), pp.89~96 (2009)
- Nakagawa, T., "Periodic-replacement Models with Threshold Levels", IEEE Transactions on Reliability, 40(3), pp.395~397 (1991)
- Nakagawa, T., "Optimal Number of Failures before Replacement Time", IEEE Transactions on Reliability, 32(1), pp.115~116 (1983)
- Pinedo, M., "Operations Research Proceedings", pp.35~42 (1992), Springer
- Pulcini, G, "Handbook of Reliability Engineering", pp.317~348 (2003), Springer
- Stadje, W., "Renewal Analysis of a Replacement Process", Operations Research Letters, 31(1), pp.1~6 (2003)
- Tilquin, C., "Periodic Replacement with Minimal Repair at Failure and Adjustment Costs", Naval Research Logistics Quarterly, 22(2), pp.243~254 (1975)
- Wang, W. Y., "Optimum Production and Inspection Modeling with Minimal Repair and Rework Considerations", Applied Mathematical Modelling, 37(4), pp.1618~1626 (2013)
- Zhao, X., "First and last Triggering Event Approaches for Replacement with Minimal Repairs", IEEE Transactions on Reliability, 65(1), pp.197~207 (2015)